Pular para o conteúdo
Novo

DeepSeek V4.1 Flash grátis por 7 dias: 10M tokens por dia após recarga de $10 ou mais. Até 30/11.

Como funciona
aeondave/gsm-lte-modulesMobile, firmware e hardware

gsm-lte-modules

⁨GSM, LTE, and NB-IoT module interfacing: SIM800/SIM7000 AT commands, logic shifting, and power constraints.⁩

v2026.11.13-21cd5683 instalações+3 em 7 dias39 Estrelassincronizado há 10 horas

Instalar

Ainda não tem a CLI da NotHoly? Instale primeiro.

$ curl -fsSL https://notholy.com/install.sh | sh
$ notholy skills install aeondave/gsm-lte-modules

Grava em ⁦~/.notholy/skills⁩ depois de conferir a assinatura e o SHA-256.

AssinaturaAssinado, ed25519
Yv+WcF52zI…vcmoY6Bw==A CLI confere o SHA-256 e a assinatura antes de gravar qualquer arquivo.
Pacoteed2f5c55…4a2acd0f
ed2f5c55c7e7…a34f4a2acd0f1 arquivo · ⁦1.1 KB⁩
VarreduraMédio2 achados
  • Nenhuma licença encontrada
  • Links para domínios externos
Ver a varredura completa
Fontegithub.com/AeonDave/malskill/tree/main/hardware/gsm-lte-modules@21cd568

Este item ainda não foi escrito no seu idioma, então aparece em English.

Goal: Interface cellular modems (SIM800L, SIM7000G, A7670) with microcontrollers to send text messages, perform HTTP(s) requests, or establish PPP TCP/IP bridges.

1. Power Requirements (Crucial)

Cellular modems emit bursts of RF transmission that pull up to 2A peaks.

  • Connecting the VCC of a SIM800L directly to a 3.3V or 5V pin of an Arduino/Raspberry Pi will cause a brownout and infinite reboot loops.
  • Rule: Use an external 3.7V - 4.2V LiPo battery or a beefy Buck Converter capable of 3A sustained, wired in parallel to the MCU.

2. UART and Logic Levels

  • Modems usually operate at 2.8V logic.
  • If using a 5V Arduino, you must use a logic level shifter or a resistor voltage divider on the RX pin of the modem string.

3. The AT Command Sequence

Modems are driven via serial AT commands. Terminate all commands with \r\n.

text
AT                  // Check communication. Expect: OK
AT+CPIN?            // Check if SIM is unlocked. Expect: +CPIN: READY
AT+CSQ              // Check Signal Quality. (0-31, 99 is no signal).
AT+CGATT?           // Check GPRS attachment. Expect: +CGATT: 1

Making an HTTP GET Request (SIM800)

text
AT+SAPBR=3,1,"Contype","GPRS"
AT+SAPBR=3,1,"APN","internet"   // Set APN of your carrier
AT+SAPBR=1,1
AT+HTTPINIT
AT+HTTPPARA="URL","http://example.com/api"
AT+HTTPACTION=0                 // 0 = GET
AT+HTTPREAD                     // Read the response payload
AT+HTTPTERM

4. OPSEC & Triangulation

  • Connecting to a cell tower registers the SIM and the module's IMEI on the Mobile Network Operator (MNO) logs.
  • The location is known to the MNO via triangulation.

Arquivos desta versão

Permissões

PermissãoDeclaradaEncontrada na varredura
Lê arquivosNãoNão
Grava arquivosNãoNão
Roda comandos no shellNãoNão
Usa a redeSimSim
Usa conectoresNãoNão
Controla um navegadorNãoNão

Achados da varredura

Revisado em 13 de nov. de 2026

  1. MédiaLicença · Nenhuma licença encontrada
  2. InfoLink · Links para domínios externos

Uma varredura limpa reduz o risco, mas não prova que o pacote é seguro. Leia o que você instala.

VersãoPublicada emCommitSHA-256AssinaturaMudança de permissão
v2026.11.13-21cd56813 de nov. de 202621cd568ed2f5c55Assinada–

Pergunte tudo o que o seu escopo permite.

Crie a conta, adicione créditos e faça a primeira pergunta no chat ou no terminal.

  1. 1/3

    Crie a conta

    Individual ou empresa. Dá para virar empresa depois sem perder saldo nem chaves.

    Pessoa físicaEmpresa
  2. 2/3

    Adicione créditos

    No cartão. Você paga por token, sem assinatura.

    $5.00recarga mínima
  3. 3/3

    Pergunte

    No chat, ou instale o CLI e rode notholy login no terminal.

    $ notholy login