Skip to content
New

DeepSeek V4.1 Flash free for 7 days: 10M tokens a day after a top-up of $10 or more. Until Nov 30.

How it works
aeondave/gsm-lte-modulesMobile, firmware and hardware

gsm-lte-modules

⁨GSM, LTE, and NB-IoT module interfacing: SIM800/SIM7000 AT commands, logic shifting, and power constraints.⁩

v2026.11.13-21cd5683 installs+3 in 7 days39 Starssynced 11 hours ago

Install

No NotHoly CLI yet? Install it first.

$ curl -fsSL https://notholy.com/install.sh | sh
$ notholy skills install aeondave/gsm-lte-modules

Writes to ⁦~/.notholy/skills⁩ after checking the signature and the SHA-256.

SignatureSigned, ed25519
Yv+WcF52zI…vcmoY6Bw==The CLI checks the SHA-256 and the signature before it writes a file.
Packageed2f5c55…4a2acd0f
ed2f5c55c7e7…a34f4a2acd0f1 file · ⁦1.1 KB⁩
ScanMedium2 findings
  • No license found
  • Links to outside domains
See the full scan
Sourcegithub.com/AeonDave/malskill/tree/main/hardware/gsm-lte-modules@21cd568

Goal: Interface cellular modems (SIM800L, SIM7000G, A7670) with microcontrollers to send text messages, perform HTTP(s) requests, or establish PPP TCP/IP bridges.

1. Power Requirements (Crucial)

Cellular modems emit bursts of RF transmission that pull up to 2A peaks.

  • Connecting the VCC of a SIM800L directly to a 3.3V or 5V pin of an Arduino/Raspberry Pi will cause a brownout and infinite reboot loops.
  • Rule: Use an external 3.7V - 4.2V LiPo battery or a beefy Buck Converter capable of 3A sustained, wired in parallel to the MCU.

2. UART and Logic Levels

  • Modems usually operate at 2.8V logic.
  • If using a 5V Arduino, you must use a logic level shifter or a resistor voltage divider on the RX pin of the modem string.

3. The AT Command Sequence

Modems are driven via serial AT commands. Terminate all commands with \r\n.

text
AT                  // Check communication. Expect: OK
AT+CPIN?            // Check if SIM is unlocked. Expect: +CPIN: READY
AT+CSQ              // Check Signal Quality. (0-31, 99 is no signal).
AT+CGATT?           // Check GPRS attachment. Expect: +CGATT: 1

Making an HTTP GET Request (SIM800)

text
AT+SAPBR=3,1,"Contype","GPRS"
AT+SAPBR=3,1,"APN","internet"   // Set APN of your carrier
AT+SAPBR=1,1
AT+HTTPINIT
AT+HTTPPARA="URL","http://example.com/api"
AT+HTTPACTION=0                 // 0 = GET
AT+HTTPREAD                     // Read the response payload
AT+HTTPTERM

4. OPSEC & Triangulation

  • Connecting to a cell tower registers the SIM and the module's IMEI on the Mobile Network Operator (MNO) logs.
  • The location is known to the MNO via triangulation.

Files in this version

Permissions

PermissionDeclaredFound by the scan
Reads filesNoNo
Writes filesNoNo
Runs shell commandsNoNo
Uses the networkYesYes
Uses connectorsNoNo
Drives a browserNoNo

Scan findings

Reviewed on Nov 13, 2026

  1. MediumLicense · No license found
  2. InfoLink · Links to outside domains

A clean scan lowers the risk but does not prove a package is safe. Read what you install.

VersionPublishedCommitSHA-256SignaturePermission change
v2026.11.13-21cd568Nov 13, 202621cd568ed2f5c55Signed–

Ask anything your scope allows.

Create an account, add credits and ask the first question in the chat or the terminal.

  1. 1/3

    Create the account

    Individual or company. You can switch to a company later without losing balance or keys.

    IndividualCompany
  2. 2/3

    Add credits

    By card. Pay per token, no subscription.

    $5.00minimum deposit
  3. 3/3

    Ask

    In the chat, or install the CLI and run notholy login in your terminal.

    $ notholy login