Saltar al contenido
Nuevo

DeepSeek V4.1 Flash gratis por 7 días: 10M tokens al día tras una recarga de $10 o más. Hasta el 30/11.

Cómo funciona
snailsploit/offensive-z-waveRed, wireless y telecom

offensive-z-wave

⁨Z-Wave attack methodology — sniffing with Z-Force / EZ-Wave / RTL-SDR + ZniffMobile, S0 (legacy) network-key derivation flaw and key reuse, S2 (modern) ECDH commissioning analysis, replay/injection on unauthenticated nodes, default-key brute-force on test deployments, and home-automation hub pivots.⁩

v2026.11.11-fd814413 instalaciones+3 en 7 días11,2 mil EstrellasMITsincronizado hace 13 horas

Instalar

¿Aún no tienes la CLI de NotHoly? Instálala primero.

$ curl -fsSL https://notholy.com/install.sh | sh
$ notholy skills install snailsploit/offensive-z-wave

Escribe en ⁦~/.notholy/skills⁩ después de comprobar la firma y el SHA-256.

FirmaFirmado, ed25519
WD7Gw5k4HS…okTVV8AQ==La CLI comprueba el SHA-256 y la firma antes de escribir cualquier archivo.
Paquete9685c24a…2099cf36
9685c24a6978…d7c22099cf361 archivo · ⁦2.6 KB⁩
EscaneoBajo1 hallazgo
  • Enlaces a dominios externos
Ver el escaneo completo
Fuentegithub.com/SnailSploit/Claude-Red/tree/main/Skills/wireless/offensive-z-wave@fd81441

Esta entrada todavía no está escrita en tu idioma, así que aparece en English.

Z-Wave runs in the 800/900 MHz ISM band (US: 908 MHz, EU: 868 MHz). Older networks used the S0 security scheme with a fixed-derivation network key — long-known to be flawed. S2 (mandatory for Z-Wave Plus v2 since 2017) uses ECDH commissioning and is significantly stronger.

Quick Workflow

  1. Identify region (US 908 MHz / EU 868 MHz) — adapter frequency must match
  2. Sniff inclusion (commissioning) traffic — that's where keys are exchanged
  3. Determine S0 vs S2 from frame format
  4. For S0: derive/replay; for S2: analyze ECDH and look for implementation flaws

Hardware

Adapter Use
Z-Force (legacy, hard to find) Original research tool
EZ-Wave (custom HackRF firmware) Modern, full transceiver
Aeotec Z-Stick Commercial controller, useful as legitimate node
HackRF + open Z-Wave firmware Multi-band SDR approach
RTL-SDR + ZniffMobile (passive only) Cheap sniffer

Sniffing

bash
# EZ-Wave (HackRF firmware-based)
git clone https://github.com/cureHsu/EZ-Wave
ezwave-sniff -f 908.4MHz -o capture.pcap

# Wireshark with the Z-Wave dissector parses captured frames
wireshark capture.pcap

Look for the inclusion phase (controller adding new device) — that's where the network key is exchanged.

S0 Security Flaw

S0 derives the network key from a fixed all-zero PSK during the inclusion of the first device. That fixed material is well-known — any S0 network you sniff during inclusion can be decrypted offline.

text
S0 commissioning:
  1. New node joins → controller sends key with zero-PSK encryption
  2. Attacker sniffs commissioning frame → derives session key
  3. All future S0 traffic on that network is decryptable

If you can:

  • Trigger inclusion (factory-reset a node, or wait for legitimate inclusion)
  • Sniff during the ~2-second key-exchange window

You own the network key for that mesh.

S2 (Z-Wave Plus / S2 Authenticated)

S2 fixes S0 by using ECDH for commissioning:

  • Each device has a Curve25519 keypair
  • Inclusion uses DSK (Device Specific Key) verified out-of-band (sticker/QR)
  • Network key never traverses the air in plaintext

S2 attack surface is mostly implementation:

  • Inclusion-mode-always-open (controller misconfig)
  • Firmware bugs in S2 verification
  • Side-channel on ECDH on resource-constrained chips
  • DSK printed on a sticker → physical access yields it

Replay / Injection on Unauthenticated Nodes

Many low-end Z-Wave devices (older sensors, basic switches) don't enforce S0 or S2 — they accept commands in cleartext.

python
# scapy-zwave (community fork) for crafted frames
from scapy.contrib.zwave import *
frame = ZWave(home_id=0x12345678)/ZWaveBasic(set_value=0xff)
sendp(frame, iface='ezwave0')

This unlocks doors / switches lights / unarms sensors when the target lacks authentication.

Key Brute-Force

For old test deployments using default home IDs / network keys:

bash
# Try default home IDs
for hid in 0x00000000 0x12345678 ...; do
  ezwave-test --home-id $hid --target-node 1
done

Hit rate on production is low; useful only for default-config IoT lab gear.

Hub Pivots

Z-Wave devices are typically controlled by a hub (SmartThings, Hubitat, Vera, Home Assistant, Z-Wave JS UI). The hub is a Linux device with the Z-Wave PSK in plaintext storage:

  • SmartThings Hub: previously cloud-only credentials; modern v3 stores network key locally
  • Home Assistant: ~/.homeassistant/zwave_js.json typically contains keys
  • Hubitat: web UI with default password on older versions

Compromise the hub → walk away with the Z-Wave PSK + every paired device's command authority. See offensive-iot for hub firmware extraction.

Engagement Cheatsheet

bash
# 1. Identify region + frequency
# US: 908.4 MHz; EU: 868.4 MHz; CN: 868.4 MHz

# 2. Sniff
ezwave-sniff -f 908.4MHz -o cap.pcap
wireshark cap.pcap   # filter zwave

# 3. Identify S0 vs S2 from frame format

# 4. For S0: capture inclusion → derive key → decrypt history + control devices

# 5. For S2: focus on hub compromise / DSK theft / implementation bugs

# 6. Test unauthenticated cleartext devices with crafted frames

Detection

  • Most Z-Wave deployments have no IDS comparable to Wi-Fi/Zigbee monitoring
  • Hub may log unexpected commands but UI rarely surfaces these to users
  • Inclusion-mode-open is visible in hub UI but ignored by inattentive admins

Reporting

  • Identify chipset / firmware revision per device (ZW0500 series, ZW7000 series)
  • Map S0 vs S2 per node — note any S0 left on a network with S2-capable nodes
  • Document hub compromise paths separately

Key References

Archivos de esta versión

Permisos

PermisoDeclaradoHallado en el escaneo
Lee archivosNoNo
Escribe archivosNoNo
Ejecuta comandos de shellSíSí
Usa la redSíSí
Usa conectoresNoNo
Controla un navegadorNoNo

Hallazgos del escaneo

Revisado el 13 nov 2026

  1. InfoEnlace · Enlaces a dominios externos

Un escaneo limpio baja el riesgo, pero no prueba que el paquete sea seguro. Lee lo que instalas.

VersiónPublicadaCommitSHA-256FirmaCambio de permisos
v2026.11.11-fd8144113 nov 2026fd814419685c24aFirmada–

Pregunta todo lo que tu alcance permite.

Crea la cuenta, añade créditos y haz la primera pregunta en el chat o en la terminal.

  1. 1/3

    Crea la cuenta

    Individual o empresa. Puedes pasar a empresa después sin perder saldo ni claves.

    IndividualEmpresa
  2. 2/3

    Añade créditos

    Con tarjeta. Pagas por token, sin suscripción.

    $5.00recarga mínima
  3. 3/3

    Pregunta

    En el chat, o instala el CLI y ejecuta notholy login en tu terminal.

    $ notholy login