דילוג לתוכן
New

DeepSeek V4.1 Flash free for 7 days: 10M tokens a day after a top-up of $10 or more. Until Nov 30.

How it works
snailsploit/offensive-z-waveרשת, אלחוט ותקשורת

offensive-z-wave

⁨Z-Wave attack methodology — sniffing with Z-Force / EZ-Wave / RTL-SDR + ZniffMobile, S0 (legacy) network-key derivation flaw and key reuse, S2 (modern) ECDH commissioning analysis, replay/injection on unauthenticated nodes, default-key brute-force on test deployments, and home-automation hub pivots.⁩

v2026.11.11-fd814413 התקנות⁦+3⁩ ב-7 ימים11.2K‏ כוכביםMITסונכרן לפני 13 שעות

התקנה

עדיין אין לכם את ה-CLI של NotHoly? התקינו אותו קודם.

$ curl -fsSL https://notholy.com/install.sh | sh
$ notholy skills install snailsploit/offensive-z-wave

נכתב אל ⁦~/.notholy/skills⁩ אחרי בדיקת החתימה וה-SHA-256.

חתימהחתום, ed25519
WD7Gw5k4HS…okTVV8AQ==ה-CLI בודק את ה-SHA-256 ואת החתימה לפני שהוא כותב קובץ כלשהו.
חבילה9685c24a…2099cf36
9685c24a6978…d7c22099cf36קובץ אחד · ⁦2.6 KB⁩
סריקהנמוךממצא אחד
  • קישורים לדומיינים חיצוניים
לסריקה המלאה
מקורgithub.com/SnailSploit/Claude-Red/tree/main/Skills/wireless/offensive-z-wave@fd81441

הפריט הזה עדיין לא נכתב בעברית, ולכן הוא מוצג בשפה אחרת: English.

Z-Wave runs in the 800/900 MHz ISM band (US: 908 MHz, EU: 868 MHz). Older networks used the S0 security scheme with a fixed-derivation network key — long-known to be flawed. S2 (mandatory for Z-Wave Plus v2 since 2017) uses ECDH commissioning and is significantly stronger.

Quick Workflow

  1. Identify region (US 908 MHz / EU 868 MHz) — adapter frequency must match
  2. Sniff inclusion (commissioning) traffic — that's where keys are exchanged
  3. Determine S0 vs S2 from frame format
  4. For S0: derive/replay; for S2: analyze ECDH and look for implementation flaws

Hardware

Adapter Use
Z-Force (legacy, hard to find) Original research tool
EZ-Wave (custom HackRF firmware) Modern, full transceiver
Aeotec Z-Stick Commercial controller, useful as legitimate node
HackRF + open Z-Wave firmware Multi-band SDR approach
RTL-SDR + ZniffMobile (passive only) Cheap sniffer

Sniffing

bash
# EZ-Wave (HackRF firmware-based)
git clone https://github.com/cureHsu/EZ-Wave
ezwave-sniff -f 908.4MHz -o capture.pcap

# Wireshark with the Z-Wave dissector parses captured frames
wireshark capture.pcap

Look for the inclusion phase (controller adding new device) — that's where the network key is exchanged.

S0 Security Flaw

S0 derives the network key from a fixed all-zero PSK during the inclusion of the first device. That fixed material is well-known — any S0 network you sniff during inclusion can be decrypted offline.

text
S0 commissioning:
  1. New node joins → controller sends key with zero-PSK encryption
  2. Attacker sniffs commissioning frame → derives session key
  3. All future S0 traffic on that network is decryptable

If you can:

  • Trigger inclusion (factory-reset a node, or wait for legitimate inclusion)
  • Sniff during the ~2-second key-exchange window

You own the network key for that mesh.

S2 (Z-Wave Plus / S2 Authenticated)

S2 fixes S0 by using ECDH for commissioning:

  • Each device has a Curve25519 keypair
  • Inclusion uses DSK (Device Specific Key) verified out-of-band (sticker/QR)
  • Network key never traverses the air in plaintext

S2 attack surface is mostly implementation:

  • Inclusion-mode-always-open (controller misconfig)
  • Firmware bugs in S2 verification
  • Side-channel on ECDH on resource-constrained chips
  • DSK printed on a sticker → physical access yields it

Replay / Injection on Unauthenticated Nodes

Many low-end Z-Wave devices (older sensors, basic switches) don't enforce S0 or S2 — they accept commands in cleartext.

python
# scapy-zwave (community fork) for crafted frames
from scapy.contrib.zwave import *
frame = ZWave(home_id=0x12345678)/ZWaveBasic(set_value=0xff)
sendp(frame, iface='ezwave0')

This unlocks doors / switches lights / unarms sensors when the target lacks authentication.

Key Brute-Force

For old test deployments using default home IDs / network keys:

bash
# Try default home IDs
for hid in 0x00000000 0x12345678 ...; do
  ezwave-test --home-id $hid --target-node 1
done

Hit rate on production is low; useful only for default-config IoT lab gear.

Hub Pivots

Z-Wave devices are typically controlled by a hub (SmartThings, Hubitat, Vera, Home Assistant, Z-Wave JS UI). The hub is a Linux device with the Z-Wave PSK in plaintext storage:

  • SmartThings Hub: previously cloud-only credentials; modern v3 stores network key locally
  • Home Assistant: ~/.homeassistant/zwave_js.json typically contains keys
  • Hubitat: web UI with default password on older versions

Compromise the hub → walk away with the Z-Wave PSK + every paired device's command authority. See offensive-iot for hub firmware extraction.

Engagement Cheatsheet

bash
# 1. Identify region + frequency
# US: 908.4 MHz; EU: 868.4 MHz; CN: 868.4 MHz

# 2. Sniff
ezwave-sniff -f 908.4MHz -o cap.pcap
wireshark cap.pcap   # filter zwave

# 3. Identify S0 vs S2 from frame format

# 4. For S0: capture inclusion → derive key → decrypt history + control devices

# 5. For S2: focus on hub compromise / DSK theft / implementation bugs

# 6. Test unauthenticated cleartext devices with crafted frames

Detection

  • Most Z-Wave deployments have no IDS comparable to Wi-Fi/Zigbee monitoring
  • Hub may log unexpected commands but UI rarely surfaces these to users
  • Inclusion-mode-open is visible in hub UI but ignored by inattentive admins

Reporting

  • Identify chipset / firmware revision per device (ZW0500 series, ZW7000 series)
  • Map S0 vs S2 per node — note any S0 left on a network with S2-capable nodes
  • Document hub compromise paths separately

Key References

הקבצים בגרסה הזו

הרשאות

הרשאההוצהרנמצא בסריקה
קורא קבציםלאלא
כותב קבציםלאלא
מריץ פקודות shellכןכן
משתמש ברשתכןכן
משתמש במחבריםלאלא
שולט בדפדפןלאלא

ממצאי הסריקה

נבדק ב-13 בנוב׳ 2026

  1. מידעקישור · קישורים לדומיינים חיצוניים

סריקה נקייה מורידה את הסיכון, אבל לא מוכיחה שהחבילה בטוחה. כדאי לקרוא מה מתקינים.

גרסהפורסמהCommitSHA-256חתימהשינוי בהרשאות
v2026.11.11-fd8144113 בנוב׳ 2026fd814419685c24aחתומה–

שאלו כל מה שהסקופ מאפשר.

יוצרים חשבון, מוסיפים קרדיטים ושואלים את השאלה הראשונה בצ׳אט או בטרמינל.

  1. 1/3

    יצירת חשבון

    פרטי או חברה. אפשר לעבור לחשבון חברה אחר כך בלי לאבד יתרה או מפתחות.

    פרטיחברה
  2. 2/3

    הוספת קרדיטים

    בכרטיס אשראי. תשלום לפי טוקן, בלי מנוי.

    $5.00טעינה מינימלית
  3. 3/3

    שאלה ראשונה

    בצ׳אט, או להתקין את ה-CLI ולהריץ notholy login בטרמינל.

    $ notholy login