sensors
Select, compare, and integrate sensors for Arduino, ESP32, robotics, model-making, and home automation with focus on signal quality, false positives, debounce, and practical wiring. Use when asked which sensor to choose, how to detect an event reliably, how to map signals into code, or how to design
v2026.11.13-21cd5683 instalaciones+3 en 7 días39 EstrellasMITsincronizado hace 10 horas
Instalar
¿Aún no tienes la CLI de NotHoly? Instálala primero.
$ curl -fsSL https://notholy.com/install.sh | sh$ notholy skills install aeondave/sensorsEscribe en ~/.notholy/skills después de comprobar la firma y el SHA-256.
FirmaFirmado, ed25519
Paquete4819e744…8ddc1df9
4819e744e109…f91a8ddc1df94 archivos · 3.6 KBEscaneoBajosin hallazgos
Fuentegithub.com/AeonDave/malskill/tree/main/hardware/sensors@21cd568
Esta entrada todavía no está escrita en tu idioma, así que aparece en English.
En esta página
This skill is for picking the right sensor and making it behave in the real world, not just on paper.
Use it when the hard part is reliability: noisy rooms, bounce, bad mounting, false triggers, threshold tuning, or choosing between several sensor types.
Workflow
Define the event or quantity.
- presence, passage, open/closed, impact, orientation, distance, climate, occupancy, leak, smoke
Define the environment.
- indoor/outdoor
- noisy people nearby
- vibration, dust, sunlight, reflective surfaces
- battery vs mains
Prefer the sensor that directly measures the thing that matters.
- impact -> piezo / vibration / accelerometer, not microphone
- path crossing -> break-beam or switch, not generic ranging by default
- open/closed -> reed / Hall / microswitch
Specify the signal model.
- digital or analog
- active-low or active-high
- debounce, hysteresis, cooldown, baseline drift, edge detection
Describe failure modes and fallback options.
- false positives from noise
- missed triggers due to blocking code
- calibration drift
- ambiguous multi-sensor events
Decision rules
- If the environment is noisy, avoid microphones unless audio itself is the signal.
- If the event is a physical crossing, start with break-beam.
- If the structure feels the event, mount the sensor on the structure.
- If two sensors are viable, prefer the one with easier calibration and clearer failure modes.
Output rules
When recommending a sensor or architecture, include:
- why this sensor fits the environment
- why common alternatives are worse here
- wiring/interface type
- tuning notes: debounce, threshold, cooldown, sampling
- whether the project needs edge-based logic, not just level polling
When to load references
- Load
references/sensor-selection.mdwhen choosing among sensor families. - Load
references/signal-quality.mdwhen debugging false triggers, debounce, or noisy data. - Load
references/home-automation.mdwhen the task is about domotica, occupancy, binary sensors, or practical monitoring.
Resources
references/
references/sensor-selection.md— selection workflow and concrete recommendations by use case.references/signal-quality.md— debounce, hysteresis, cooldown, mounting, and ambiguous-event handling.references/home-automation.md— binary-sensor style thinking and practical smart-home sensor patterns.
Archivos de esta versión
references/35.8 KB
- home-automation.md1.5 KB
- sensor-selection.md2.5 KB
- signal-quality.md1.8 KB
- SKILL.md2.9 KB
Permisos
| Permiso | Declarado | Hallado en el escaneo |
|---|---|---|
| Lee archivos | No | No |
| Escribe archivos | No | No |
| Ejecuta comandos de shell | No | No |
| Usa la red | No | No |
| Usa conectores | No | No |
| Controla un navegador | No | No |
Hallazgos del escaneo
Revisado el 13 nov 2026
El escaneo no encontró nada que señalar en esta versión.
Un escaneo limpio baja el riesgo, pero no prueba que el paquete sea seguro. Lee lo que instalas.
| Versión | Publicada | Commit | SHA-256 | Firma | Cambio de permisos |
|---|---|---|---|---|---|
| v2026.11.13-21cd568 | 13 nov 2026 | 21cd568 | 4819e744 | Firmada | – |
Más de AeonDave
Todo de este publicadorMás en Móvil, firmware y hardware
Ver la categoríaPregunta todo lo que tu alcance permite.
Crea la cuenta, añade créditos y haz la primera pregunta en el chat o en la terminal.
- 1/3
Crea la cuenta
Individual o empresa. Puedes pasar a empresa después sin perder saldo ni claves.
IndividualEmpresa - 2/3
Añade créditos
Con tarjeta. Pagas por token, sin suscripción.
$5.00recarga mínima - 3/3
Pregunta
En el chat, o instala el CLI y ejecuta notholy login en tu terminal.
$ notholy login