sensors
Select, compare, and integrate sensors for Arduino, ESP32, robotics, model-making, and home automation with focus on signal quality, false positives, debounce, and practical wiring. Use when asked which sensor to choose, how to detect an event reliably, how to map signals into code, or how to design
v2026.11.13-21cd5683 התקנות+3 ב-7 ימים39 כוכביםMITסונכרן לפני 10 שעות
התקנה
עדיין אין לכם את ה-CLI של NotHoly? התקינו אותו קודם.
$ curl -fsSL https://notholy.com/install.sh | sh$ notholy skills install aeondave/sensorsנכתב אל ~/.notholy/skills אחרי בדיקת החתימה וה-SHA-256.
חתימהחתום, ed25519
חבילה4819e744…8ddc1df9
4819e744e109…f91a8ddc1df94 קבצים · 3.6 KBסריקהנמוךאין ממצאים
מקורgithub.com/AeonDave/malskill/tree/main/hardware/sensors@21cd568
הפריט הזה עדיין לא נכתב בעברית, ולכן הוא מוצג בשפה אחרת: English.
בעמוד הזה
This skill is for picking the right sensor and making it behave in the real world, not just on paper.
Use it when the hard part is reliability: noisy rooms, bounce, bad mounting, false triggers, threshold tuning, or choosing between several sensor types.
Workflow
Define the event or quantity.
- presence, passage, open/closed, impact, orientation, distance, climate, occupancy, leak, smoke
Define the environment.
- indoor/outdoor
- noisy people nearby
- vibration, dust, sunlight, reflective surfaces
- battery vs mains
Prefer the sensor that directly measures the thing that matters.
- impact -> piezo / vibration / accelerometer, not microphone
- path crossing -> break-beam or switch, not generic ranging by default
- open/closed -> reed / Hall / microswitch
Specify the signal model.
- digital or analog
- active-low or active-high
- debounce, hysteresis, cooldown, baseline drift, edge detection
Describe failure modes and fallback options.
- false positives from noise
- missed triggers due to blocking code
- calibration drift
- ambiguous multi-sensor events
Decision rules
- If the environment is noisy, avoid microphones unless audio itself is the signal.
- If the event is a physical crossing, start with break-beam.
- If the structure feels the event, mount the sensor on the structure.
- If two sensors are viable, prefer the one with easier calibration and clearer failure modes.
Output rules
When recommending a sensor or architecture, include:
- why this sensor fits the environment
- why common alternatives are worse here
- wiring/interface type
- tuning notes: debounce, threshold, cooldown, sampling
- whether the project needs edge-based logic, not just level polling
When to load references
- Load
references/sensor-selection.mdwhen choosing among sensor families. - Load
references/signal-quality.mdwhen debugging false triggers, debounce, or noisy data. - Load
references/home-automation.mdwhen the task is about domotica, occupancy, binary sensors, or practical monitoring.
Resources
references/
references/sensor-selection.md— selection workflow and concrete recommendations by use case.references/signal-quality.md— debounce, hysteresis, cooldown, mounting, and ambiguous-event handling.references/home-automation.md— binary-sensor style thinking and practical smart-home sensor patterns.
הקבצים בגרסה הזו
references/35.8 KB
- home-automation.md1.5 KB
- sensor-selection.md2.5 KB
- signal-quality.md1.8 KB
- SKILL.md2.9 KB
הרשאות
| הרשאה | הוצהר | נמצא בסריקה |
|---|---|---|
| קורא קבצים | לא | לא |
| כותב קבצים | לא | לא |
| מריץ פקודות shell | לא | לא |
| משתמש ברשת | לא | לא |
| משתמש במחברים | לא | לא |
| שולט בדפדפן | לא | לא |
ממצאי הסריקה
נבדק ב-13 בנוב׳ 2026
הסריקה לא מצאה בגרסה הזו שום דבר שצריך לסמן.
סריקה נקייה מורידה את הסיכון, אבל לא מוכיחה שהחבילה בטוחה. כדאי לקרוא מה מתקינים.
| גרסה | פורסמה | Commit | SHA-256 | חתימה | שינוי בהרשאות |
|---|---|---|---|---|---|
| v2026.11.13-21cd568 | 13 בנוב׳ 2026 | 21cd568 | 4819e744 | חתומה | – |
עוד מ-AeonDave
הכול מהמפרסם הזהעוד בקטגוריה מובייל, קושחה וחומרה
לקטגוריהשאלו כל מה שהסקופ מאפשר.
יוצרים חשבון, מוסיפים קרדיטים ושואלים את השאלה הראשונה בצ׳אט או בטרמינל.
- 1/3
יצירת חשבון
פרטי או חברה. אפשר לעבור לחשבון חברה אחר כך בלי לאבד יתרה או מפתחות.
פרטיחברה - 2/3
הוספת קרדיטים
בכרטיס אשראי. תשלום לפי טוקן, בלי מנוי.
$5.00טעינה מינימלית - 3/3
שאלה ראשונה
בצ׳אט, או להתקין את ה-CLI ולהריץ notholy login בטרמינל.
$ notholy login