Перейти к содержимому
New

DeepSeek V4.1 Flash free for 7 days: 10M tokens a day after a top-up of $10 or more. Until Nov 30.

How it works
snailsploit/offensive-crash-analysisРеверс-инжиниринг и фаззинг

offensive-crash-analysis

v2026.11.11-fd814413 установки+3 за 7 дней11,2 тыс. ЗвездыMITсинхронизировано 13 часов назад

Установка

Ещё нет NotHoly CLI? Сначала установите её.

$ curl -fsSL https://notholy.com/install.sh | sh
$ notholy skills install snailsploit/offensive-crash-analysis

Пишет в ⁦~/.notholy/skills⁩ после проверки подписи и SHA-256.

ПодписьПодписано, ed25519
3HkgIFFlOp…Nx06ftBg==CLI проверяет SHA-256 и подпись, прежде чем записать хоть один файл.
Пакет880b103c…a4851406
880b103c62c9…c85fa48514061 файл · ⁦117.9 KB⁩
ПроверкаСредний5 замечаний
  • injection.no_confirmationSKILL.md:5327
  • injection.no_confirmationSKILL.md:8891
  • Ссылка на IP-адресSKILL.md:10866
Вся проверка
Источникgithub.com/SnailSploit/Claude-Red/tree/main/Skills/exploit-dev/offensive-crash-analysis@fd81441

Эта запись еще не переведена на русский, поэтому показан текст на другом языке: English.

Metadata

Description

Week 4 exploit development curriculum. Crash triage and analysis methodology: WinDbg/GDB analysis, ASAN/MSAN output interpretation, exploitability assessment, register/stack trace reading, root cause identification. Use when analyzing crash dumps, assessing exploitability, or understanding fuzzer-generated crashes.

Trigger Phrases

Use this skill when the conversation involves any of: crash analysis, crash triage, WinDbg, GDB, ASAN, MSAN, exploitability, stack trace, register dump, segfault, null deref, access violation, week 4

Instructions for Claude

When this skill is active:

  1. Load and apply the full methodology below as your operational checklist
  2. Follow steps in order unless the user specifies otherwise
  3. For each technique, consider applicability to the current target/context
  4. Track which checklist items have been completed
  5. Suggest next steps based on findings

Full Methodology

Week 4: Crash Analysis and Exploitability Assessment

Overview

created by AnotherOne from @Pwn3rzs Telegram channel.

After finding potential vulnerabilities through fuzzing (Week 2) or patch diffing (Week 3), the next critical step is analyzing crashes to determine if they're exploitable. This week focuses on crash triage, debugger mastery, and techniques for identifying how to reach vulnerable code paths from attacker-controlled input.

Once you've confirmed a crash is exploitable and built a PoC, you'll be ready for Basic Exploitation in Week 5.

Prerequisites

Before starting this week, ensure you have:

  • A Windows VM (for WinDbg labs) and a Linux VM (for GDB/ASAN/CASR labs).
  • Completed Week 2 fuzzing labs, including running AFL++ or libFuzzer against at least one C/C++ target
  • Completed (or skimmed) Week 3 patch diffing labs:
    • Familiar with Ghidriff/Diaphora diff reports and how to interpret changed functions
    • Understand how to extract Windows updates and Linux kernel patches
    • Reviewed at least one case study (CVE-2022-34718 EvilESP, CVE-2024-1086 nf_tables, or 7-Zip symlink bugs)
  • Comfortable understanding from Week 1 of basic vulnerability classes (buffer overflow, UAF, integer bugs, info leaks) and their exploit primitives

Crash Analysis Decision Tree

Use this decision tree to select the appropriate tools and workflow for any crash you encounter:

text
┌─────────────────────────────────────────────────────────────────────┐
│                        CRASH RECEIVED                               │
└─────────────────────────────────────────────────────────────────────┘
                                │
                                ▼
                    ┌───────────────────────┐
                    │ Source code available?│
                    └───────────────────────┘
                      │                    │
                     Yes                   No
                      │                    │
                      ▼                    ▼
        ┌─────────────────────┐   ┌──────────────────────────┐
        │ Recompile with      │   │ What platform?           │
        │ ASAN + UBSAN        │   └──────────────────────────┘
        │ (Day 2)             │     │         │         │
        └─────────────────────┘     │         │         │
                      │          Windows   Linux    Mobile
                      │             │         │         │
                      ▼             ▼         ▼         ▼
        ┌─────────────────────┐ ┌───────┐ ┌───────┐ ┌───────────┐
        │ Run crash input     │ │WinDbg │ │Pwndbg │ │ Tombstone │
        │ Get detailed report │ │+ TTD  │ │+ rr   │ │ + Frida   │
        └─────────────────────┘ │(Day 1)│ │(Day 1)│ │ (Future)  │
                      │         └───────┘ └───────┘ └───────────┘
                      │             │         │         │
                      └─────────────┴────┬────┴─────────┘
                                         │
                                         ▼
                    ┌─────────────────────────────────────┐
                    │ Crash requires special environment? │
                    └─────────────────────────────────────┘
                       │                              │
                      Yes                             No
                       │                              │
                       ▼                              │
        ┌─────────────────────────────┐               │
        │ Setup reproduction env:     │               │
        │ - Network (tcpdump, proxy)  │               │
        │ - Files (strace, procmon)   │               │
        │ - Services (docker, VM)     │               │
        └─────────────────────────────┘               │
                       │                              │
                       └──────────────┬───────────────┘
                                      │
                                      ▼
                            ┌─────────────────────┐
                            │ Crash type known?   │
                            └─────────────────────┘
                              │                 │
                             Yes                No
                              │                 │
                              ▼                 ▼
                ┌─────────────────────┐  ┌─────────────────────┐
                │ Run CASR for        │  │ Manual analysis:    │
                │ classification      │  │ - Examine registers │
                │ (Day 3)             │  │ - Check memory      │
                └─────────────────────┘  │ - Disassemble       │
                              │          │ (Day 3)             │
                              │          └─────────────────────┘
                              │                 │
                              └────────┬────────┘
                                       │
                                       ▼
                          ┌─────────────────────────┐
                          │ EXPLOITABILITY ASSESS   │
                          │ - Check mitigations     │
                          │ - Control analysis      │
                          │ - Reachability (Day 4)  │
                          └─────────────────────────┘
                                       │
                                       ▼
                          ┌─────────────────────────┐
                          │ Multiple crashes?       │
                          └─────────────────────────┘
                            │                    │
                           Yes                   No
                            │                    │
                            ▼                    ▼
              ┌─────────────────────┐   ┌─────────────────────┐
              │ Deduplicate (Day 5) │   │ Minimize (Day 5)    │
              │ - CASR cluster      │   │ - afl-tmin          │
              │ - Stack hash        │   │ - Manual reduction  │
              └─────────────────────┘   └─────────────────────┘
                            │                    │
                            └────────┬───────────┘
                                     │
                                     ▼
                        ┌─────────────────────────┐
                        │ Create PoC (Day 6)      │
                        │ - Python + pwntools     │
                        │ - Verify reliability    │
                        │ - Document findings     │
                        └─────────────────────────┘

Quick Reference - Tool Selection by Scenario:

Scenario Primary Tool Secondary Tool Sanitizer
Linux binary, have source GDB + Pwndbg rr ASAN + UBSAN
Linux binary, no source GDB + Pwndbg Ghidra N/A
Windows binary, have source WinDbg + TTD Visual Studio ASAN
Windows binary, no source WinDbg + TTD IDA/Ghidra N/A
Fuzzer crash corpus CASR afl-tmin ASAN
Non-deterministic crash rr (Linux) / TTD (Windows) Chaos mode TSAN
Kernel crash (Linux) crash utility GDB + KASAN KASAN
Kernel crash (Windows) WinDbg kernel Driver Verifier N/A
Android app crash Tombstone + ndk-stack Frida HWASan
Rust/Go crash Native debugger Sanitizer output Built-in

Day 1: Debugger Fundamentals and Crash Dump Analysis

  • Goal: Learn Windows Debugger (WinDbg) and Linux debugger (GDB + Pwndbg) for analyzing application crashes.
  • Activities:

Reproduction Fidelity

[!IMPORTANT] Before any crash analysis, ensure you can reproduce the crash reliably. A crash that only happens "sometimes" or "on the fuzzer's machine" is nearly impossible to analyze or exploit. This section establishes the mandatory checklist for achieving reproduction fidelity.

Reproduction Fidelity Checklist

Before analyzing any crash, verify these match between discovery and analysis environments:

text
┌─────────────────────────────────────────────────────────────────┐
│ REPRODUCTION FIDELITY CHECKLIST                                 │
├─────────────────────────────────────────────────────────────────┤
│ System Environment                                              │
│ [ ] OS/Kernel version     : ________________________________    │
│ [ ] libc version          : ________________________________    │
│ [ ] CPU architecture      : [ ] x86 [ ] x86_64 [ ] ARM64        │
│ [ ] Container/VM          : [ ] Native [ ] Docker [ ] VM        │
│ [ ] ASLR state            : [ ] Enabled [ ] Disabled            │
├─────────────────────────────────────────────────────────────────┤
│ Process Environment                                             │
│ [ ] argv (command-line)   : ________________________________    │
│ [ ] Environment variables : ________________________________    │
│ [ ] Working directory     : ________________________________    │
│ [ ] Locale (LC_ALL, LANG) : ________________________________    │
│ [ ] umask / permissions   : ________________________________    │
├─────────────────────────────────────────────────────────────────┤
│ Input Path                                                      │
│ [ ] Input source          : [ ] stdin [ ] file [ ] network      │
│ [ ] Input file path       : ________________________________    │
│ [ ] Network port/protocol : ________________________________    │
├─────────────────────────────────────────────────────────────────┤
│ Build Configuration                                             │
│ [ ] Compiler version      : ________________________________    │
│ [ ] Optimization level    : [ ] -O0 [ ] -O1 [ ] -O2 [ ] -O3     │
│ [ ] Sanitizers            : [ ] ASAN [ ] UBSAN [ ] TSAN [ ] None│
│ [ ] Debug symbols         : [ ] Yes [ ] No                      │
│ [ ] Mitigations           : [ ] PIE [ ] Canary [ ] RELRO        │
└─────────────────────────────────────────────────────────────────┘

Essential Environment Knobs

ASAN/UBSAN Options (Linux/macOS):

bash
# Full ASAN options for crash analysis
export ASAN_OPTIONS="\
abort_on_error=1:\
symbolize=1:\
detect_leaks=1:\
disable_coredump=0:\
halt_on_error=1:\
print_stats=1:\
check_initialization_order=1:\
detect_stack_use_after_return=1:\
quarantine_size_mb=256"

# UBSAN options
export UBSAN_OPTIONS="\
print_stacktrace=1:\
halt_on_error=1:\
suppressions=ubsan_suppressions.txt"

# Symbolizer path (required for readable stack traces)
export ASAN_SYMBOLIZER_PATH=$(command -v llvm-symbolizer)

glibc Allocator Tuning (Linux):

bash
# Enable glibc heap consistency checks (catch corruption early)
export MALLOC_CHECK_=3

# Modern glibc tunable interface (glibc 2.26+)
export GLIBC_TUNABLES="\
glibc.malloc.check=3:\
glibc.malloc.perturb=165"

# What these do:
# MALLOC_CHECK_=3: Abort on heap corruption detection
# glibc.malloc.perturb=165: Fill freed memory with 0xA5 (helps detect UAF)

Core Dump Configuration (Linux):

bash
# Enable unlimited core dumps
ulimit -c unlimited

# Verify core pattern (where dumps go)
cat /proc/sys/kernel/core_pattern

# For local dumps in CWD (temporary, affects system):
# echo 'core.%e.%p' | sudo tee /proc/sys/kernel/core_pattern

ASLR Control (Linux - for deterministic analysis):

bash
# Check current ASLR state
cat /proc/sys/kernel/randomize_va_space
# 0 = disabled, 1 = conservative, 2 = full

# Disable ASLR for current shell (temporary, per-process)
setarch $(uname -m) -R ./target < crash_input

# Or system-wide (DANGEROUS - only for isolated VMs):
# echo 0 | sudo tee /proc/sys/kernel/randomize_va_space

Input Path Matching

The crash may behave differently depending on HOW input reaches the target:

bash
# If fuzzer used stdin:
./target < crash_input

# If fuzzer used file argument:
./target crash_input

# If fuzzer used network:
cat crash_input | nc localhost 8080

# WRONG: Mixing input paths can change behavior!
# Fuzzer: ./target @@ (file)
# You:    ./target < crash (stdin)  # May not reproduce!

Example: stdin vs file difference:

c
// Some programs behave differently:
// - stdin may be line-buffered
// - File may be memory-mapped
// - Network may have different read chunk sizes

// This can affect:
// - Buffer contents at crash time
// - Heap layout (different allocation patterns)
// - Race conditions (timing changes)

Quick Reproduction Test Script

bash
#!/bin/bash
# repro_test.sh - Verify crash reproduction

CRASH_INPUT="$1"
TARGET="$2"
EXPECTED_SIGNAL="${3:-11}"  # Default: SIGSEGV (11)

echo "[*] Testing reproduction of $(basename $CRASH_INPUT)"
echo "[*] Target: $TARGET"
echo "[*] Expected signal: $EXPECTED_SIGNAL"

# Set up environment
ulimit -c unlimited
export ASAN_OPTIONS="abort_on_error=1:symbolize=1"

# Run 10 times
CRASHES=0
for i in {1..10}; do
    timeout 5s $TARGET < "$CRASH_INPUT" 2>/dev/null
    EXIT_CODE=$?

    # Check for crash signal (128 + signal number)
    if [ $EXIT_CODE -gt 128 ]; then
        SIGNAL=$((EXIT_CODE - 128))
        if [ $SIGNAL -eq $EXPECTED_SIGNAL ] || [ $SIGNAL -eq 6 ]; then
            ((CRASHES++))
        fi
    fi
done

echo "[*] Crash rate: $CRASHES/10"
if [ $CRASHES -ge 9 ]; then
    echo "[+] Reproduction: RELIABLE"
elif [ $CRASHES -ge 5 ]; then
    echo "[!] Reproduction: FLAKY - investigate environment"
else
    echo "[-] Reproduction: FAILED - check environment checklist"
fi

Installing WinDbg and Symbol Support

WinDbg Preview (recommended - modern UI):

batch
winget install Microsoft.WinDbg

Windows SDK Debugging Tools (includes cdb.exe for command-line/batch analysis):

bash
# Option 1: Install via winget (Windows SDK)
winget install --source winget --exact --id Microsoft.WindowsSDK.10.0.26100

# Option 2: Download from Microsoft
# https://developer.microsoft.com/en-us/windows/downloads/windows-sdk/
# During installation, select "Debugging Tools for Windows"

# After installation, cdb.exe is located at:
# C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe

# Add to PATH for convenience (run as Administrator):
setx PATH "%PATH%;C:\Program Files (x86)\Windows Kits\10\Debuggers\x64" /M

# Or use full path in scripts:
"C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe" -z dump.dmp -c "!analyze -v; q"

Configure Symbol Path:

bash
# In WinDbg Settings -> Default Symbol Path, or:
# In WinDbg command window:
.sympath SRV*C:\Symbols*https://msdl.microsoft.com/download/symbols

# Or set environment variable permanently (recommended):
setx _NT_SYMBOL_PATH "SRV*C:\Symbols*https://msdl.microsoft.com/download/symbols"

# Create symbols cache directory
mkdir C:\Symbols

# Reload symbols (in debugger)
.reload /f

Linux Crash Dump Generation and Pwndbg Setup

[!HINT] While Windows uses WinDbg, Linux crash analysis uses GDB enhanced with Pwndbg. This section covers parallel Linux setup.

Installing Pwndbg:

bash
# Install GDB
sudo apt install gdb

# Install Pwndbg (recommended for crash analysis)
cd ~/tools
git clone --depth 1 https://github.com/pwndbg/pwndbg
cd pwndbg
./setup.sh

# Verify installation
gdb -q -ex "quit" 2>&1 | grep -q "pwndbg" && echo "pwndbg installed successfully"

[!WARNING] Pwndbg is installed per-user in ~/.gdbinit. If you run sudo gdb, it uses root's home directory and won't find your pwndbg config. Solutions: For crash analysis of your own compiled test programs, you typically don't need sudo. Only use sudo when attaching to system processes or analyzing setuid binaries.

bash
# Option 1: Use gdb as regular user (recommended for most analysis)
cd ~/crash_analysis_lab
gdb ./vuln_no_protect -c core.dump

# Option 2: If you MUST use sudo (e.g., attaching to privileged process)
sudo -E gdb ./program  # -E preserves your environment including HOME

# Option 3: Install pwndbg for root as well
sudo su -
cd /root
git clone https://github.com/pwndbg/pwndbg
cd pwndbg && ./setup.sh
exit

# Option 4: Explicitly source pwndbg in sudo gdb session
sudo gdb -ex "source /home/<YOUR_USER>/tools/pwndbg/gdbinit.py" ./program

Configuring Core Dumps on Linux:

bash
# Check current core dump configuration
cat /proc/sys/kernel/core_pattern

# Enable core dumps for current shell (recommended for learning)
ulimit -c unlimited

[!TIP] For the exercises in this course, you typically only need:

bash
ulimit -c unlimited  # In your current shell

On modern Ubuntu/Debian with systemd, cores are handled by systemd-coredump even if you set ulimit. Use coredumpctl to list and debug them.

[!WARNING] Optional: Local core files in CWD (modifies system-wide settings)

If you specifically need core files in your working directory instead of systemd-coredump:

bash
# This is SYSTEM-WIDE and may interfere with other tooling
echo 'core.%e.%p' | sudo tee /proc/sys/kernel/core_pattern

Additional kernel settings that affect core dumps:

  • kernel.core_uses_pid: Append PID to core filename
  • fs.suid_dumpable: Controls dumps for setuid binaries (0=disabled, 1=enabled, 2=suidsafe)

Building a Vulnerable Test Suite for Linux

Create these vulnerable C programs to generate real crashes:

bash
# Create a directory for crash analysis practice
mkdir -p ~/crash_analysis_lab/{src,crashes,cores}
cd ~/crash_analysis_lab/src

vulnerable_suite.c - Save this file for testing multiple vulnerability types:

c
// ~/crash_analysis_lab/src/vulnerable_suite.c - Compile with different flags for different exercises
#include <stdio.h>
#include <stdlib.h>
#include <string.h>

// 1. Stack Buffer Overflow
void stack_overflow(char *input) {
    char buffer[64];
    printf("[*] Copying input to 64-byte buffer...\n");
    strcpy(buffer, input);  // No bounds check!
    printf("[*] Buffer: %s\n", buffer);
}

// 2. Heap Buffer Overflow
void heap_overflow(char *input) {
    char *buf = malloc(32);
    printf("[*] Allocated 32 bytes at %p\n", buf);
    strcpy(buf, input);  // Overflow heap buffer
    printf("[*] Buffer: %s\n", buf);
    free(buf);
}

// 3. Use-After-Free
void use_after_free() {
    char *ptr = malloc(64);
    strcpy(ptr, "Hello, World!");
    printf("[*] Allocated at %p: %s\n", ptr, ptr);
    free(ptr);
    printf("[*] Freed, now accessing...\n");
    printf("[*] UAF read: %s\n", ptr);  // UAF read - may print stale data
    ptr[0] = 'X';  // UAF write - may corrupt allocator state
}

// 4. Double Free
void double_free() {
    char *ptr = malloc(64);
    printf("[*] Allocated at %p\n", ptr);
    free(ptr);
    printf("[*] First free done\n");
    free(ptr);  // Double free!
}

// 5. NULL Pointer Dereference
void null_deref(int trigger) {
    char *ptr = trigger ? malloc(10) : NULL;
    printf("[*] ptr = %p\n", ptr);
    *ptr = 'A';  // NULL deref if trigger is 0
}

void print_usage(char *prog) {
    printf("Usage: %s <test_num> [input]\n", prog);
    printf("Tests:\n");
    printf("  1 <input>  - Stack overflow (need ~100+ chars)\n");
    printf("  2 <input>  - Heap overflow (need ~50+ chars)\n");
    printf("  3          - Use-after-free\n");
    printf("  4          - Double free\n");
    printf("  5 <0|1>    - NULL deref (0=crash)\n");
    printf("\nExample: %s 1 $(python3 -c \"print('A'*100)\")\n", prog);
}

int main(int argc, char **argv) {
    if (argc < 2) { print_usage(argv[0]); return 1; }
    int test = atoi(argv[1]);

    switch(test) {
        case 1: if (argc<3) return 1; stack_overflow(argv[2]); break;
        case 2: if (argc<3) return 1; heap_overflow(argv[2]); break;
        case 3: use_after_free(); break;
        case 4: double_free(); break;
        case 5: if (argc<3) return 1; null_deref(atoi(argv[2])); break;
        default: print_usage(argv[0]); return 1;
    }
    return 0;
}

Build the test suite:

bash
cd ~/crash_analysis_lab/src

# 1. Build WITHOUT mitigations (for basic crash analysis)
gcc -g -fno-stack-protector -no-pie -z execstack \
    vulnerable_suite.c -o ../vuln_no_protect

# 2. Build WITH ASAN (for detailed memory error reports)
gcc -g -O1 -fsanitize=address -fno-omit-frame-pointer \
    vulnerable_suite.c -o ../vuln_asan

# 3. Build with standard protections (see how mitigations affect crashes)
gcc -g vulnerable_suite.c -o ../vuln_protected

Generate your first crashes:

bash
cd ~/crash_analysis_lab

# Enable core dumps
ulimit -c unlimited

# Test 1: Stack overflow - generates a core dump
./vuln_no_protect 1 $(python3 -c "print('A'*200)")
# You should see: Segmentation fault (core dumped)
# Check for core file: ls -la core* (if core_pattern writes to CWD) or use coredumpctl (systemd systems) or look at output of `cat /proc/sys/kernel/core_pattern`

# Test 2: Stack overflow with ASAN - detailed report
./vuln_asan 1 $(python3 -c "print('A'*200)") 2>&1 | tee crashes/stack_asan.txt
# ASAN prints detailed overflow information

# Test 3: Use-after-free with ASAN
./vuln_asan 3 2>&1 | tee crashes/uaf_asan.txt

# Test 4: NULL dereference - generates core dump
./vuln_no_protect 5 0

Using coredumpctl (systemd systems):

bash
sudo apt install systemd-coredump
# List recent core dumps
coredumpctl list

# Show details of most recent crash
coredumpctl info

# Debug most recent crash with GDB
coredumpctl debug

# Debug specific crash by PID
coredumpctl debug 12345

# Extract core dump to file for offline analysis
coredumpctl dump -o crash.core

# View where cores are stored
cat /etc/systemd/coredump.conf
# [Coredump]
# Storage=external    # 'external' = /var/lib/systemd/coredump/
# Compress=yes
# MaxUse=1G          # Max disk space for cores

Configuring systemd-coredump (/etc/systemd/coredump.conf):

ini
[Coredump]
# Where to store cores: external (disk), journal, or none
Storage=external

# Compress with zstd/lz4
Compress=yes

# Maximum size for stored cores
ProcessSizeMax=2G

# Maximum total disk usage
MaxUse=5G

# Keep cores for this long
KeepFree=1G

After editing, reload: sudo systemctl daemon-reload

ASAN and Core Dumps

[!NOTE] ASAN often exits via SIGABRT, not SIGSEGV. This can be confusing when trying to capture core dumps.

bash
# ASAN default: aborts on error (SIGABRT = signal 6)
# Core dumps may not be generated by default for SIGABRT

# Method 1: Configure ASAN to allow core dumps
export ASAN_OPTIONS="abort_on_error=1:disable_coredump=0"

# Method 2: Check that coredumpctl captures SIGABRT
# coredumpctl list
# Should show crashes with signal=6 (SIGABRT)

# Method 3: Use gdb to catch ASAN abort
echo "1 $(python3 -c "print('A'*200)")" > crash_input
gdb ./vuln_asan
(gdb) run < crash_input
# ASAN prints report, then GDB catches SIGABRT
(gdb) bt full  # Get full backtrace

# What "success" looks like with ASAN + core dump:
# 1. ASAN prints detailed error report (allocation/free stacks)
# 2. Program aborts with SIGABRT
# 3. coredumpctl captures the core
# 4. coredumpctl debug lets you examine state at abort

Building Vulnerable Test Suite for Windows

Prerequisites:

  • Visual Studio 2022 (Community edition is free) or Build Tools for Visual Studio
  • Open "x64 Native Tools Command Prompt for VS 2022" for compilation

vulnerable_suite_win.c - Save this file for Windows crash analysis practice:

c
// C:\CrashAnalysisLab\src\vulnerable_suite_win.c
#include <windows.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>

void stack_overflow(char *input) {
    char buffer[64];
    printf("[*] Copying input to 64-byte buffer...\n");
    strcpy(buffer, input);
    printf("[*] Buffer: %s\n", buffer);
}

void heap_overflow(char *input) {
    char *buf = (char*)HeapAlloc(GetProcessHeap(), 0, 32);
    printf("[*] Allocated 32 bytes at %p\n", buf);
    strcpy(buf, input);
    printf("[*] Buffer: %s\n", buf);
    HeapFree(GetProcessHeap(), 0, buf);
}

void use_after_free() {
    char *ptr = (char*)HeapAlloc(GetProcessHeap(), 0, 64);
    strcpy(ptr, "Hello, World!");
    printf("[*] Allocated at %p: %s\n", ptr, ptr);
    HeapFree(GetProcessHeap(), 0, ptr);
    printf("[*] Freed, now accessing...\n");
    printf("[*] UAF read: %s\n", ptr);
    ptr[0] = 'X';
}

void double_free() {
    char *ptr = (char*)HeapAlloc(GetProcessHeap(), 0, 64);
    printf("[*] Allocated at %p\n", ptr);
    HeapFree(GetProcessHeap(), 0, ptr);
    printf("[*] First free done\n");
    HeapFree(GetProcessHeap(), 0, ptr);
}

void null_deref(int trigger) {
    char *ptr = trigger ? (char*)HeapAlloc(GetProcessHeap(), 0, 10) : NULL;
    printf("[*] ptr = %p\n", ptr);
    *ptr = 'A';
}

void integer_overflow(unsigned int size) {
    unsigned int alloc_size = size + 16;
    if (alloc_size < size) {
        printf("[*] Integer overflow detected! alloc_size=%u\n", alloc_size);
    }
    char *buf = (char*)HeapAlloc(GetProcessHeap(), 0, alloc_size);
    printf("[*] Allocated %u bytes at %p\n", alloc_size, buf);
    memset(buf, 'A', size);
    HeapFree(GetProcessHeap(), 0, buf);
}

void print_usage(char *prog) {
    printf("Windows Vulnerable Test Suite\n");
    printf("==============================\n");
    printf("Usage: %s <test_num> [input]\n\n", prog);
    printf("Tests:\n");
    printf("  1 <input>  - Stack overflow (need ~100+ chars)\n");
    printf("  2 <input>  - Heap overflow (need ~50+ chars)\n");
    printf("  3          - Use-after-free\n");
    printf("  4          - Double free\n");
    printf("  5 <0|1>    - NULL deref (0=crash)\n");
    printf("  6 <size>   - Integer overflow (try 4294967280)\n");
    printf("\nExamples:\n");
    printf("  %s 1 ", prog);
    printf("AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA\n");
    printf("  %s 5 0\n", prog);
}

int main(int argc, char **argv) {
    if (argc < 2) { print_usage(argv[0]); return 1; }
    int test = atoi(argv[1]);

    switch(test) {
        case 1: if (argc<3) return 1; stack_overflow(argv[2]); break;
        case 2: if (argc<3) return 1; heap_overflow(argv[2]); break;
        case 3: use_after_free(); break;
        case 4: double_free(); break;
        case 5: if (argc<3) return 1; null_deref(atoi(argv[2])); break;
        case 6: if (argc<3) return 1; integer_overflow((unsigned int)strtoul(argv[2], NULL, 10)); break;
        default: print_usage(argv[0]); return 1;
    }
    printf("[*] Test completed without crash\n");
    return 0;
}

Build the Windows test suite:

bash
# install visual studio community
# Open "x64 Native Tools Command Prompt for VS 2022"

# Create lab directory
mkdir C:\CrashAnalysisLab\src
mkdir C:\CrashAnalysisLab\dumps
cd C:\CrashAnalysisLab\src

# Save the source code above as vulnerable_suite_win.c, then:

# 1. Build WITHOUT mitigations (for basic crash analysis)
#    /GS- disables stack cookies, /DYNAMICBASE:NO disables ASLR
cl /Zi /Od /GS- vulnerable_suite_win.c /Fe:..\vuln_win.exe /link /DYNAMICBASE:NO /NXCOMPAT:NO

# 2. Build WITH ASAN (Visual Studio 2019 16.9+ or VS 2022)
cl /Zi /Od /fsanitize=address vulnerable_suite_win.c /Fe:..\vuln_asan.exe

# 3. Build with standard protections (default mitigations)
cl /Zi /Od vulnerable_suite_win.c /Fe:..\vuln_protected.exe

Generate your first Windows crashes:

bash
cd C:\CrashAnalysisLab

# Test 1: Stack overflow
vuln_win.exe 1 AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
# Should crash with access violation
# crash will be at C:\CrashDumps\

# Test 2: Stack overflow with ASAN - detailed report
vuln_asan.exe 1 AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
# ASAN prints detailed overflow information

# Test 3: Use-after-free with ASAN
vuln_asan.exe 3

# Test 4: NULL dereference
vuln_win.exe 5 0

# Test 5: Double free (may not crash immediately without PageHeap)
vuln_win.exe 4

# Directory of C:\CrashDumps

# 01/05/2026  03:11 PM    <DIR>          .
# 01/05/2026  03:10 PM         9,879,181 vuln_win.exe.7452.dmp
# 01/05/2026  03:11 PM         9,866,817 vuln_win.exe.7756.dmp
# 01/05/2026  03:09 PM        10,543,599 vuln_win.exe.984.dmp

Using PowerShell to generate long strings:

bash
# PowerShell equivalent of Python one-liners
cd C:\CrashAnalysisLab

# Generate 200 'A' characters
$payload = "A" * 200

# Test stack overflow
.\vuln_win.exe 1 $payload

# Test with ASAN
.\vuln_asan.exe 1 $payload 2>&1 | Tee-Object -FilePath C:\CrashDumps\stack_asan.txt

# Test UAF with ASAN
.\vuln_asan.exe 3 2>&1 | Tee-Object -FilePath C:\CrashDumps\uaf_asan.txt

Verify crashes are captured:

bash
# If WER LocalDumps is configured (see next section), check:
dir C:\CrashDumps\

# Or use Event Viewer:
# Windows Logs -> Application -> Look for "Application Error" events

WER/ProcDump Dump Collection

Windows Error Reporting (WER) LocalDumps

WER is Windows' built-in crash reporting. Configure it to save dumps locally:

Enable LocalDumps via Registry:

bash
# Create LocalDumps key for ALL applications
reg add "HKLM\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps" /v DumpFolder /t REG_EXPAND_SZ /d "C:\CrashDumps" /f
reg add "HKLM\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps" /v DumpType /t REG_DWORD /d 2 /f
reg add "HKLM\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps" /v DumpCount /t REG_DWORD /d 10 /f

# DumpType values:
# 0 = Custom (use CustomDumpFlags)
# 1 = Mini dump
# 2 = Full dump (recommended for crash analysis)

# Create dump directory
mkdir C:\CrashDumps

Per-Application LocalDumps (configure for our test binary):

bash
# Configure for our vulnerable test binary
reg add "HKLM\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps\vuln_win.exe" /v DumpFolder /t REG_EXPAND_SZ /d "C:\CrashAnalysisLab\dumps" /f
reg add "HKLM\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps\vuln_win.exe" /v DumpType /t REG_DWORD /d 2 /f

# Or for any application
reg add "HKLM\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps\target.exe" /v DumpFolder /t REG_EXPAND_SZ /d "C:\CrashDumps\target" /f
reg add "HKLM\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps\target.exe" /v DumpType /t REG_DWORD /d 2 /f

Verify WER is Enabled:

bash
# Check WER service status
Get-Service WerSvc

# Check LocalDumps configuration
Get-ItemProperty "HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps"

Sysinternals ProcDump

ProcDump provides more control than WER and catches crashes in real-time:

Basic Crash Capture (using our test binary):

bash
winget install Microsoft.Sysinternals.Suite

# First, ensure you've built the test suite (see "Building a Windows Vulnerable Test Suite" above)
cd C:\CrashAnalysisLab

# Options:
# -ma    : Full memory dump (recommended)
# -e     : Write dump on unhandled exception
# -x     : Launch and monitor (below)

# Launch and monitor for crashes
procdump -ma -e -x dumps vuln_win.exe 1 AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA

# Monitor already-running process
procdump -ma -e -p <PID>

Advanced ProcDump Usage:

bash
cd C:\CrashAnalysisLab

# Capture on first-chance exceptions (catches more bugs)
procdump -ma -e 1 -x dumps vuln_win.exe 1 AAAA...

# Capture on specific exception codes
procdump -ma -e 1 -f C0000005 -x dumps vuln_win.exe 5 0   # Access violation (NULL deref)

# Capture multiple dumps (for intermittent crashes)
procdump -ma -e -n 5 -x dumps vuln_win.exe 3   # UAF - capture up to 5 dumps

# Monitor service (generic example)
# procdump -ma -e -x C:\Dumps -w ServiceName.exe

ProcDump + Fuzzing Integration:

bash
# Monitor fuzzing target (generic example)
# procdump -ma -e -x C:\FuzzDumps -accepteula target.exe @@

# Batch process dumps from fuzzing run
# for %d in (C:\CrashAnalysisLab\dumps\*.dmp) do cdb -z "%d" -c "!analyze -v; q" >> analysis.txt

Batch Dump Triage with CDB

Analyze multiple dumps automatically:

bash
# Set CDB path (adjust version number as needed)
set CDB="C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe"

# Single dump analysis (use actual dump from ProcDump)
%CDB% -z C:\CrashAnalysisLab\dumps\vuln_win.exe_XXXXXX.dmp

# Or if cdb is in PATH:
cdb -z C:\CrashAnalysisLab\dumps\vuln_win.exe_XXXXXX.dmp -c "!analyze -v; q"

Batch triage script (batch_triage.cmd):

bash
@echo off
# Set path to cdb.exe (adjust if needed)
set CDB="C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe"

for %%f in (C:\CrashAnalysisLab\dumps\*.dmp) do (
    echo ======================================== >> triage_report.txt
    echo Analyzing: %%f >> triage_report.txt
    echo ======================================== >> triage_report.txt
    %CDB% -z "%%f" -c ".symfix; .reload; !analyze -v; q" >> triage_report.txt 2>&1
)
echo Done! Results in triage_report.txt

PowerShell Batch Analysis:

bash
# batch_analyze.ps1

# Path to cdb.exe - adjust if your Windows SDK version differs
$cdb = "C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe"

# Verify cdb exists
if (-not (Test-Path $cdb)) {
    Write-Error "cdb.exe not found at $cdb. Install Windows SDK Debugging Tools."
    exit 1
}

$dumps = Get-ChildItem "C:\CrashAnalysisLab\dumps\*.dmp"
$results = @()

foreach ($dump in $dumps) {
    Write-Host "Analyzing $($dump.Name)..."

    $output = & $cdb -z $dump.FullName -c "!analyze -v; !exploitable; q" 2>&1 | Out-String

    # Extract key info
    $exploitable = if ($output -match "Exploitability Classification: (\w+)") { $Matches[1] } else { "Unknown" }
    $bugcheck = if ($output -match "EXCEPTION_CODE: \(NTSTATUS\) (0x[0-9a-f]+)") { $Matches[1] } else { "Unknown" }

    $results += [PSCustomObject]@{
        DumpFile = $dump.Name
        Exploitability = $exploitable
        ExceptionCode = $bugcheck
    }
}

$results | Export-Csv "triage_results.csv" -NoTypeInformation
$results | Format-Table -AutoSize

Symbols and Symbolization (Linux Quick Reference)

Meaningful backtraces (GDB, CASR, ASAN reports) require symbols.

1. Build with debug info (preferred for labs):

bash
cd ~/crash_analysis_lab/src
sudo apt install -y clang-18 clang-18-dbgsym
clang -g -O1 -fno-omit-frame-pointer vulnerable_suite.c -o ../target

2. Install debug symbols for system libraries (real-world targets):

bash
# Ubuntu/Debian: prefer -dbg packages when available (example: libc6-dbg).
# Some packages ship -dbgsym via Ubuntu's ddebs repository.

# Fedora/RHEL:
# sudo dnf debuginfo-install glibc

3. Use debuginfod for "fetch symbols on demand" (when local symbols unavailable):

bash
# Set URL for your distribution (GDB/LLDB will auto-fetch symbols)
# Ubuntu:
export DEBUGINFOD_URLS="https://debuginfod.ubuntu.com"
# Fedora:
# export DEBUGINFOD_URLS="https://debuginfod.fedoraproject.org"
# Generic fallback:
# export DEBUGINFOD_URLS="https://debuginfod.elfutils.org/"

# Note: If you install -dbgsym packages locally (recommended),
# GDB uses those directly without needing debuginfod.

4. Symbolize raw addresses when you only have PCs:

bash
sudo apt install -y elfutils binutils
cd ~/crash_analysis_lab

# IMPORTANT: Full source info requires debug symbols (-g flag at compile time)
# Verify with: file ./target  (look for "with debug_info, not stripped")

# Find function addresses in your binary
nm ./target | grep -E " T " | head -5
# Example output:
# 00000000000012b0 T double_free
# 0000000000001624 T _fini
# 00000000000011e0 T heap_overflow
# 0000000000001000 T _init
# 00000000000013c0 T main

# Symbolize using an address from nm output or a crash backtrace
# (PIE binaries show low addresses; add the runtime base for live processes)
addr2line -e ./target -f -C 0x12b0
# With debug info (-g at compile time):
#   double_free
#   /home/dev/crash_analysis_lab/src/vulnerable_suite.c:37
#
# Without debug info, you only get the function name:
#   double_free
#   ??:0

# NOTE: eu-addr2line (from elfutils) may show ??:0 even with debug info
# due to DWARF5 compatibility issues. Prefer addr2line (from binutils).
# eu-addr2line -e ./target -f -C 0x12b0  # May not resolve line numbers

# Dynamic lookup example:
addr2line -e ./target -f -C $(nm ./target | grep " T main" | awk '{print $1}')

Symbol Hygiene Best Practices

  • Symbols make or break crash analysis.
  • Without them, you're staring at hex addresses instead of function names.
  • This section provides best practices for both Windows and Linux.

Linux Symbol Management

1. debuginfod (Automatic Symbol Fetching):

debuginfod can automatically fetch debug symbols on-demand from public servers when you don't have them installed locally.

bash
# Install debuginfod client
sudo apt install debuginfod

# Configure debuginfod URL for your distribution
# Ubuntu:
export DEBUGINFOD_URLS="https://debuginfod.ubuntu.com"
# Fedora:
# export DEBUGINFOD_URLS="https://debuginfod.fedoraproject.org"
# Arch:
# export DEBUGINFOD_URLS="https://debuginfod.archlinux.org"

# For GDB, enable automatic fetching
echo "set debuginfod enabled on" >> ~/.gdbinit

# For LLDB
export LLDB_DEBUGINFOD_URLS="https://debuginfod.elfutils.org/"

[!IMPORTANT] debuginfod vs local debug packages: debuginfod queries remote servers for symbols you don't have locally. If you install debug symbol packages (e.g., coreutils-dbgsym), the symbols are stored locally at /usr/lib/debug/ and GDB uses them directly without needing debuginfod.

Verification: Don't use debuginfod-find to verify your setup—it only queries remote servers. Instead, verify GDB can find symbols:

bash
# Install local debug symbols (recommended for common packages)
sudo apt install coreutils-dbgsym

# Verify GDB finds the symbols
gdb -q -ex "file /usr/bin/ls" -ex "info sources" -ex "quit" 2>&1 | head -5
# Expected output (with pwndbg you'll see its banner first, then):
#   Reading symbols from /usr/bin/ls...
#   Reading symbols from /usr/lib/debug/.build-id/xx/xxxxx.debug...
#   ... followed by source file paths like ls.c, hash.c, etc.

When to use debuginfod: debuginfod is useful when you're analyzing crashes in binaries where you haven't installed the -dbgsym package. GDB will automatically fetch symbols from the configured server.

2. Installing Debug Symbol Packages:

bash
sudo apt install libc6-dbgsym           # Common libraries
sudo apt install libssl3t64-dbgsym      # OpenSSL (Ubuntu 24.04+)
sudo apt install zlib1g-dbgsym          # zlib

# For -dbgsym packages (automatically generated):
# Enable ddebs repository first:
#echo "deb http://ddebs.ubuntu.com $(lsb_release -cs) main restricted universe multiverse" | \
#    sudo tee /etc/apt/sources.list.d/ddebs.list
#sudo apt-key adv --keyserver keyserver.ubuntu.com --recv-keys F2EDC64DC5AEE1F6B9C621F0C8CAB6595FDFF622
#sudo apt update
#sudo apt install package-dbgsym

3. Symbolizing Addresses with addr2line:

bash
# addr2line (from binutils) is preferred for symbolization
# NOTE: eu-addr2line (from elfutils) may show ??:0 even with debug info
# due to DWARF5 compatibility issues. Prefer addr2line.

# IMPORTANT: ASAN reports are ALREADY SYMBOLIZED!
# If your ASAN output shows:
#   #0 0x59cc1877a53e in use_after_free src/vulnerable_suite.c:33
# The file:line info (src/vulnerable_suite.c:33) is already there!
# You do NOT need to run addr2line on ASAN output.
#
# addr2line is only needed for:
# - Raw core dumps without ASAN
# - Stripped binaries with separate debug info
# - Non-ASAN crash logs that only show addresses
#
# If ASAN output shows "??:0" instead of file:line, fix symbolization:
#   sudo apt install llvm
#   export ASAN_SYMBOLIZER_PATH=$(which llvm-symbolizer)
#   # Then re-run the crash

# For non-ASAN crashes, use STATIC addresses from nm (not runtime addresses):
# Runtime addresses like 0x59cc1877a53e include PIE base and won't work!
nm ./vuln_asan | grep "T use_after_free"
# Output: 00000000000014a3 T use_after_free

# Use the static address with addr2line:
addr2line -e ./vuln_asan -f -C 0x14a3
# Output:
#   use_after_free
#   /home/dev/crash_analysis_lab/src/vulnerable_suite.c:27

# addr2line options:
# -f: Show function names
# -C: Demangle C++ symbols
# -i: Show inlined functions

# Example: Look up a function by name and symbolize it
addr2line -e ./vuln_asan -f -C $(nm ./vuln_asan | grep "T print_usage" | awk '{print $1}')

# To convert runtime address to static (for PIE binaries):
# 1. Get the binary's load base from /proc/<pid>/maps or ASAN output
# 2. Subtract base from runtime address
# Example: If base is 0x59cc18779000 and crash addr is 0x59cc1877a53e:
#   Static offset = 0x59cc1877a53e - 0x59cc18779000 = 0x153e
#   addr2line -e ./vuln_asan -f -C 0x153e

# With debuginfod (for system binaries without local debug packages):
DEBUGINFOD_URLS="https://debuginfod.ubuntu.com" \
    addr2line -e /usr/bin/crashed_binary -f -C 0x12345

4. Verifying Symbol Quality:

bash
# Check if binary has debug symbols
file target
# Look for: "with debug_info, not stripped"

# Check symbol table size
nm target | wc -l

# Check DWARF info presence
readelf --debug-dump=info target | head -50

# Verify specific function is symbolized
nm target | grep stack_overflow

Windows Symbol Management

1. Configuring _NT_SYMBOL_PATH:

bash
# Set symbol path permanently (user environment)
setx _NT_SYMBOL_PATH "srv*C:\Symbols*https://msdl.microsoft.com/download/symbols"

# Or in current session
set _NT_SYMBOL_PATH=srv*C:\Symbols*https://msdl.microsoft.com/download/symbols

# Multiple symbol sources (local + Microsoft + custom server)
set _NT_SYMBOL_PATH=C:\MySymbols;srv*C:\Symbols*https://msdl.microsoft.com/download/symbols;srv*C:\ThirdParty*https://symbols.example.com/

2. WinDbg Symbol Commands:

bash
# open C:\CrashAnalysisLab\vuln_win.exe in windbg
# Quick setup for Microsoft symbols
.symfix C:\Symbols
# Add additional symbol path
.sympath+ C:\CrashAnalysisLab
.reload

# Show current symbol path
.sympath

# Force reload all symbols
.reload /f

# Reload specific module
# .reload /f ntdll.dll

# Enable verbose symbol loading (debugging symbol issues)
!sym noisy
.reload /f

# Disable noisy mode when done
!sym quiet

# Check symbol status for module
lm m ntdll
# Look for: "pdb symbols" vs "export symbols" vs "no symbols"

# Verify specific symbol loads
x ntdll!Rtl*    # List all Rtl* functions - only works with symbols

3. Troubleshooting Symbol Issues:

bash
# Symbol loading failed? Check these:
!sym noisy
.reload /f vuln_win.exe

# Common issues:
# 1. Symbol server timeout → Use local cache
# 2. PDB mismatch → Check build matches binary
# 3. Private symbols missing → Request from vendor

# Verify PDB matches binary
!lmi target
# Check: "Checksum" matches between .exe and .pdb

# Force load unverified symbols (use with caution)
.symopt+ 0x40     # SYMOPT_LOAD_ANYTHING
.reload /f
.symopt- 0x40     # Disable after

Cross-Platform Symbol Checklist

  • Linux
    • debuginfod URL configured
    • Debug packages installed for target libraries
    • Binary built with -g flag
    • eu-addr2line available for batch symbolization
  • Windows
    • _NT_SYMBOL_PATH environment variable set
    • Symbol cache directory exists and writable
    • Microsoft symbol server accessible
    • PDB files match target binaries (same build)
  • Both Platforms
    • Third-party library symbols obtained
    • Symbol server accessible (or offline cache populated)
    • Test symbolization: verify backtrace shows function names

Analyzing Crash in Pwndbg

bash
# Load core dump
# If you have a local core file (e.g., from core_pattern writing to CWD):
cd ~/crash_analysis_lab
# run it against Test 1 in line 564
gdb ./vuln_no_protect -c /var/crash/core.vuln_no_protect.1184.1766232655
#Reading symbols from ./vuln_no_protect...
#[New LWP 1184]
#[Thread debugging using libthread_db enabled]
#Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1".
#Core was generated by `./vuln_no_protect 1 AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA'.
#Program terminated with signal SIGSEGV, Segmentation fault.
##0  0x4141414141414141 in ?? ()
#------- tip of the day (disable with set show-tips off) -------
#GDB and Pwndbg parameters can be shown or set with show <param> and set <param> <value> GDB commands
#LEGEND: STACK | HEAP | CODE | DATA | WX | RODATA
#──────────────────────────────────────────────────────────────────────────────────────────────────────────────────[ REGISTERS / show-flags off / show-compact-regs off ]#───────────────────────────────────────────────────────────────────────────────────────────────────────────────────
# RAX  0xd5
# RBX  0x7ffcc3436ea8 —▸ 0x7ffcc343748f ◂— './vuln_no_protect'
# RCX  0
# RDX  0
# RDI  0x7ffcc3436b20 —▸ 0x7ffcc3436b50 ◂— 'AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA\nAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAH'
# RSI  0xee2e2a0 ◂— 0x66667542205d2a5b ('[*] Buff')
# R8   0
# R9   0
# R10  0xffffffff
# R11  0x202
# R12  3
# R13  0
# R14  0x403e00 (__do_global_dtors_aux_fini_array_entry) —▸ 0x4011a0 (__do_global_dtors_aux) ◂— endbr64
# R15  0x74e4537e6000 (_rtld_global) —▸ 0x74e4537e72e0 ◂— 0
# RBP  0x4141414141414141 ('AAAAAAAA')
# RSP  0x7ffcc3436d60 ◂— 'AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA'
# RIP  0x4141414141414141 ('AAAAAAAA')
#───────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────[ DISASM / x86-64 / set emulate on ]#────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────
#Invalid address 0x4141414141414141
#─────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────[ STACK ]#─────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────
#00:0000│ rsp 0x7ffcc3436d60 ◂— 'AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA'
#... ↓        7 skipped
#───────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────[ BACKTRACE ]#───────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────
# ► 0 0x4141414141414141 None
#   1 0x4141414141414141 None
#   2 0x4141414141414141 None
#   3 0x4141414141414141 None
#   4 0x4141414141414141 None
#   5 0x4141414141414141 None
#   6 0x4141414141414141 None
#   7 0x4141414141414141 None

pwndbg> print $_siginfo
#$1 = {
#  si_signo = 11,
#  si_errno = 0,
#  si_code = 1,
#  _sifields = {
#    _pad = {1094795585, 1094795585, 0 <repeats 26 times>},
#    _kill = {
#      si_pid = 1094795585,
#      si_uid = 1094795585
#    },
#    _timer = {
#      si_tid = 1094795585,
#      si_overrun = 1094795585,
#      si_sigval = {
#        sival_int = 0,
#        sival_ptr = 0x0
#      }
#    },
#   ...
#
# Key fields:
# - si_signo = 11 → SIGSEGV
# - si_code = 1 → SEGV_MAPERR (address not mapped to object)
# - si_code = 2 → SEGV_ACCERR (invalid permissions, e.g., NX violation)
# - _sigfault.si_addr → The address that caused the fault
#
# This confirms: Control flow hijack - CPU tried to execute at invalid address 0x4141...

# Check stack for overflow pattern
pwndbg> telescope $rsp 30
#00:0000│ rsp 0x7ffcc3436d60 ◂— 'AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA'
#... ↓        14 skipped
#0f:0078│     0x7ffcc3436dd8 —▸ 0x74e4537e6000 (_rtld_global) —▸ 0x74e4537e72e0 ◂— 0
#10:0080│     0x7ffcc3436de0 ◂— 0xdd1f52d83d3c0cb0
#11:0088│     0x7ffcc3436de8 ◂— 0xcb2e72dba51e0cb0
#12:0090│     0x7ffcc3436df0 ◂— 0x7ffc00000000
#13:0098│     0x7ffcc3436df8 ◂— 0
#14:00a0│     0x7ffcc3436e00 ◂— 0
#15:00a8│     0x7ffcc3436e08 ◂— 3
#16:00b0│     0x7ffcc3436e10 —▸ 0x7ffcc3436ea0 ◂— 3
#17:00b8│     0x7ffcc3436e18 ◂— 0xa20d707b5eb54d00
#18:00c0│     0x7ffcc3436e20 —▸ 0x7ffcc3436e80 ◂— 0
#19:00c8│     0x7ffcc3436e28 —▸ 0x74e45342a28b (__libc_start_main+139) ◂— mov r15, qword ptr [rip + 0x1d8cf6]
#1a:00d0│     0x7ffcc3436e30 —▸ 0x7ffcc3436ec8 —▸ 0x7ffcc343756c ◂— 'SHELL=/bin/bash'
#1b:00d8│     0x7ffcc3436e38 —▸ 0x403e00 (__do_global_dtors_aux_fini_array_entry) —▸ 0x4011a0 (__do_global_dtors_aux) ◂— endbr64
#1c:00e0│     0x7ffcc3436e40 —▸ 0x7ffcc3436ec8 —▸ 0x7ffcc343756c ◂— 'SHELL=/bin/bash'
#1d:00e8│     0x7ffcc3436e48 —▸ 0x401485 (main) ◂— endbr64

WinDbg User Interface Overview

Command Window: Type commands here Registers Window: View CPU register state Disassembly Window: View assembly code at current IP Memory Window: Inspect memory contents Call Stack Window: View function call hierarchy Locals/Watch Window: Inspect variables

Essential Keyboard Shortcuts:

  • F5: Go (continue execution)
  • F10: Step over
  • F11: Step into
  • Shift+F9: Set/remove breakpoint
  • Shift+F11: Step out
  • Ctrl+Break: Break into debugger

Analyzing Stack Buffer Overflow Crashes

Crash Scenario: Stack buffer overflow in vulnerable application

Load Crash Dump:

bash
# Open crash dump file
File → Open Dump file → select C:\CrashAnalysisLab\dumps\xxx.dmp (or one of the crashes from linux)

# Or from command line
cd C:\CrashAnalysisLab\dumps
windbg -z xxx.dmp

# Verify dump loaded
!analyze -v
#FILE_IN_CAB:  vuln_win.exe_260105_151715.dmp
#COMMENT:
#*** procdump  -ma -e -x dumps vuln_win.exe 1 #AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA#AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA#AAAAAAAAAA
#*** Unhandled exception: C0000005.ACCESS_VIOLATION
#NTGLOBALFLAG:  70
#APPLICATION_VERIFIER_FLAGS:  0
#CONTEXT:  (.ecxr)
#rax=00000000000000d7 rbx=000000000052e6b0 rcx=0000000000000000
#rdx=0000000000010000 rsi=0000000000000000 rdi=00000000005342d0
#rip=000000014000744a rsp=000000000014fed8 rbp=0000000000000000
# r8=7ffffffffffffffc  r9=0000000000000000 r10=0000000000000000
#r11=000000000014fcd0 r12=0000000000000000 r13=0000000000000000
#r14=0000000000000000 r15=0000000000000000
#iopl=0         nv up ei pl nz na po nc
#cs=0033  ss=002b  ds=002b  es=002b  fs=0053  gs=002b             efl=00010204
#vuln_win!stack_overflow+0x3a:
#00000001`4000744a c3              ret
#Resetting default scope
#EXCEPTION_RECORD:  (.exr -1)
#ExceptionAddress: 000000014000744a (vuln_win!stack_overflow+0x000000000000003a)
#   ExceptionCode: c0000005 (Access violation)
#  ExceptionFlags: 00000000
#NumberParameters: 2
#   Parameter[0]: 0000000000000000
#   Parameter[1]: ffffffffffffffff
#Attempt to read from address ffffffffffffffff
#PROCESS_NAME:  vuln_win.exe
#READ_ADDRESS:  ffffffffffffffff
#ERROR_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%p referenced memory at 0x%p. The memory could not be %s.
#EXCEPTION_CODE_STR:  c0000005
#EXCEPTION_PARAMETER1:  0000000000000000
#EXCEPTION_PARAMETER2:  ffffffffffffffff
#IP_ON_HEAP:  4141414141414141
#The fault address in not in any loaded module, please check your build's rebase
#log at <releasedir>\bin\build_logs\timebuild\ntrebase.log for module which may
#contain the address if it were loaded.

Initial Analysis Commands:

bash
# Show registers at crash
r

# Display call stack
k
kv      # Verbose with frame pointer
kP      # With full source paths (if symbols loaded)
kn      # With frame numbers

# Show current instruction
u @rip
u @rip L10    # Disassemble 10 instructions

# Examine stack
dps @rsp
dps @rsp L50  # Display 50 pointer-sized values

Analyzing Heap Corruption Crashes

Using the vuln_win.exe test suite from the "Building a Windows Vulnerable Test Suite" section, generate heap-related crashes:

bash
# Generate heap overflow crash (Test 2)
cd C:\CrashAnalysisLab
"C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\gflags.exe" /p /enable vuln_win.exe /full
vuln_win.exe 2 AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA#AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA#AAAAAAAAAA
# Crash dump saved to C:\CrashDumps\vuln_win.exe.<PID>.dmp

# Generate use-after-free crash (Test 3)
vuln_win.exe 3
# May not crash without PageHeap - see PageHeap lab below

# Generate double-free crash (Test 4)
vuln_win.exe 4
# May not crash without PageHeap - see PageHeap lab below

Load and Analyze Heap Overflow Dump:

bash
# open dump! via GUI: File → Open Crash Dump → select the .dmp file

# Initial analysis
0:000> !analyze -v
# Look for: EXCEPTION_CODE: c0000005 (Access violation)
# Look for: heap_overflow or HeapFree in the stack

Heap Metadata Corruption Pattern (typical output):

bash
# Crash often occurs in HeapFree or subsequent allocation
0:000> k
# ntdll!RtlUserThreadStart$filt$0+0x3f
# ntdll!_C_specific_handler+0x93
# ntdll!RtlpExecuteHandlerForException+0xf
# ntdll!RtlDispatchException+0x437
# ntdll!KiUserExceptionDispatch+0x2e
# vuln_win!__entry_from_strcat_in_strcpy+0x1f
# vuln_win!heap_overflow+0x45
# vuln_win!main+0xdb

# Check heap state
0:000> !heap -s                    # Summary of all heaps
0:000> !heap -a 0                  # Analyze default process heap

# Check what was the destination buffer
0:000> dq @rdx L8

# See how far past the buffer you wrote(WRITE_ADDRESS from !analyze -v)
0:000> !address 0x01fac000

# Examine the vulnerable function
0:000> uf vuln_win!heap_overflow

# Check source if symbols are good
0:000> lsa vuln_win!heap_overflow

Identifying UAF with vuln_win.exe:

bash
# First, enable PageHeap for better UAF detection (run as Administrator)
#cd C:\CrashAnalysisLab
#"C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\gflags.exe" /p /enable /full vuln_win.exe

# Now run the UAF test (Test 3)
vuln_win.exe 3
# With PageHeap, this will crash immediately on UAF access

# Load the crash dump
windbg -z C:\CrashDumps\vuln_win.exe.<PID>.dmp

0:000> !analyze -v
# Typical UAF crash pattern
0:000> k
 # ChildEBP RetAddr
 # 00 ntdll!RtlpLowFragHeapFree+0x42
 # 01 vuln_win!use_after_free+0x15
 # 02 vuln_win!main+0x89

# Check if address was recently freed (requires PageHeap) -(READ_ADDRESS)
0:000> !heap -p -a 0x01fabfc0
    address 0000000001fabfc0 found in
    _DPH_HEAP_ROOT @ 1c01000
    in free-ed allocation (  DPH_HEAP_BLOCK:         VirtAddr         VirtSize)
                                    1c0c820:          1fab000             2000
    00007ffd1074b2d3 ntdll!RtlDebugFreeHeap+0x0000000000000037
    00007ffd106e370c ntdll!RtlpFreeHeap+0x000000000000178c
    00007ffd10739300 ntdll!RtlFreeHeap+0x0000000000000620
    000000014000753d vuln_win!use_after_free+0x000000000000005d

# Don't forget to disable PageHeap after analysis
#"C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\gflags.exe" /p /disable vuln_win.exe

Classification: Use-After-Free - object accessed after being freed.

Common Crash Patterns and Identification

1. Null Pointer Dereference:

bash
0:000> r rax
rax=0000000000000000

0:000> u @rip
mov  qword ptr [rax], rcx    # Writing to NULL

# Usually not exploitable unless kernel-mode

2. Access Violation (Invalid Address):

bash
0:000> r rax
rax=deadbeefdeadbeef         # Invalid address

# Could be:
# - Uninitialized pointer
# - Freed memory
# - Corrupted pointer

3. Stack Cookie Violation:

bash
0:000> k
ntdll!RtlReportCriticalFailure
ntdll!RtlpReportHeapFailure
<Application>!__security_check_cookie
<Application>!function_with_stack_cookie

# Stack overflow detected, but mitigated by /GS

4. Heap Corruption Detected:

bash
0:000> k
ntdll!RtlReportCriticalFailure
ntdll!RtlpHeapHandleError
ntdll!RtlpLogHeapFailure

# Heap allocator detected corruption
# Check nearby allocations for overflow source

Essential WinDbg Commands Reference

Memory Examination:

bash
db <address>           # Display bytes
dw <address>           # Display words (2 bytes)
dd <address>           # Display dwords (4 bytes)
dq <address>           # Display qwords (8 bytes)
da <address>           # Display ASCII string
du <address>           # Display Unicode string
dps <address>          # Display pointer-sized values with symbols

Disassembly:

bash
u <address>            # Unassemble at address
u <address> L<count>   # Unassemble count instructions
ub <address>           # Unassemble backward
uf <function>          # Unassemble entire function

Breakpoints:

bash
bp <address>           # Set breakpoint
bp <module>!<function> # Set breakpoint on function
ba r 1 <address>       # Hardware breakpoint on read
ba w 4 <address>       # Hardware breakpoint on write (4 bytes)
bl                     # List breakpoints
bc *                   # Clear all breakpoints

Execution Control:

`

Файлы этой версии

Права

ПравоЗаявленоНайдено проверкой
Читает файлыДаДа
Пишет файлыДаДа
Выполняет команды shellДаДа
Ходит в сетьДаДа
Использует коннекторыНетНет
Управляет браузеромНетНет

Замечания проверки

Проверено 13 нояб. 2026 г.

  1. СредняяPrompt injection · injection.no_confirmationSKILL.md:5327
  2. СредняяPrompt injection · injection.no_confirmationSKILL.md:8891
  3. СредняяСсылка · Ссылка на IP-адресSKILL.md:10866
  4. СредняяPrompt injection · injection.no_confirmationSKILL.md:11220
  5. ИнфоСсылка · Ссылки на внешние домены

Чистая проверка снижает риск, но не доказывает, что пакет безопасен. Читайте то, что ставите.

ВерсияОпубликованаКоммитSHA-256ПодписьИзменение прав
v2026.11.11-fd8144113 нояб. 2026 г.fd81441880b103cПодписана–

Спрашивайте обо всём, что позволяет ваш скоуп.

Создайте аккаунт, пополните баланс и задайте первый вопрос в чате или в терминале.

  1. 1/3

    Создайте аккаунт

    Личный или для компании. Позже можно перейти на аккаунт компании без потери баланса и ключей.

    ЛичныйКомпания
  2. 2/3

    Пополните баланс

    Картой. Оплата за токены, без подписки.

    $5.00минимальное пополнение
  3. 3/3

    Спрашивайте

    В чате, или установите CLI и выполните notholy login в терминале.

    $ notholy login