Pular para o conteúdo
Novo

DeepSeek V4.1 Flash grátis por 7 dias: 10M tokens por dia após recarga de $10 ou mais. Até 30/11.

Como funciona
mukul975/implementing-ics-firewall-with-tofinoMobile, firmware e hardware

implementing-ics-firewall-with-tofino

⁨Deploys and configures Tofino industrial firewalls (Belden/Hirschmann)⁩

v1.02 instalações+2 em 7 dias36,3 mil EstrelasApache-2.0sincronizado há 12 horas

Instalar

Ainda não tem a CLI da NotHoly? Instale primeiro.

$ curl -fsSL https://notholy.com/install.sh | sh
$ notholy skills install mukul975/implementing-ics-firewall-with-tofino

Grava em ⁦~/.notholy/skills⁩ depois de conferir a assinatura e o SHA-256.

AssinaturaAssinado, ed25519
BDXWB+Sa52…xsViSlAA==A CLI confere o SHA-256 e a assinatura antes de gravar qualquer arquivo.
Pacotec45fc121…a66ae397
c45fc12156c9…a59ba66ae3974 arquivos · ⁦10.1 KB⁩
VarreduraMédio2 achados
  • Script executável junto com a skillscripts/agent.py
  • Links para domínios externos
Ver a varredura completa
Fontegithub.com/mukul975/Anthropic-Cybersecurity-Skills/tree/main/skills/implementing-ics-firewall-with-tofino@54a7988

Este item ainda não foi escrito no seu idioma, então aparece em English.

When to Use

  • When deploying zone-level firewall protection directly in front of critical PLCs or RTUs
  • When requiring deep packet inspection of industrial protocols (Modbus, EtherNet/IP, OPC, S7comm)
  • When implementing IEC 62443 zone and conduit boundaries with protocol-aware enforcement
  • When protecting legacy PLCs that cannot be patched and need compensating controls
  • When segmenting control network zones without disrupting existing industrial communications

Do not use for enterprise IT firewall deployment, for perimeter firewall between IT and OT (use Palo Alto/Fortinet at the DMZ), or for environments using only IP-based protocols without OT-specific DPI needs.

Prerequisites

  • Tofino Xenon appliance or Tofino virtual appliance with appropriate license
  • Tofino Central Management Platform (CMP) for centralized policy management
  • Network topology map showing PLC/RTU placement and communication requirements
  • Baseline of OT protocol communications (Modbus function codes, EtherNet/IP CIP services)
  • Change management approval for inline deployment between network zones

Workflow

Step 1: Design Tofino Deployment Architecture

yaml
# Tofino ICS Firewall Deployment Architecture
# Zone-level protection using deep packet inspection

deployment_zones:
  zone_1_reactor_control:
    tofino_appliance: "TOFINO-XN-001"
    deployment_mode: "inline_bridge"
    protected_assets:
      - name: "PLC-REACTOR-01"
        ip: "10.10.1.10"
        vendor: "Siemens S7-1500"
        protocols: ["S7comm/102", "Profinet"]
      - name: "PLC-REACTOR-02"
        ip: "10.10.1.11"
        vendor: "Siemens S7-1500"
        protocols: ["S7comm/102", "Profinet"]
    authorized_communications:
      - source: "10.10.2.50"  # Engineering workstation
        dest: "10.10.1.0/24"
        protocols: ["S7comm"]
        access_type: "engineering"
      - source: "10.10.2.10"  # HMI server
        dest: "10.10.1.0/24"
        protocols: ["S7comm"]
        access_type: "operational"

  zone_2_packaging:
    tofino_appliance: "TOFINO-XN-002"
    deployment_mode: "inline_bridge"
    protected_assets:
      - name: "PLC-PACK-01"
        ip: "10.10.3.10"
        vendor: "Rockwell ControlLogix"
        protocols: ["EtherNet-IP/44818", "CIP"]
    authorized_communications:
      - source: "10.10.2.20"  # HMI
        dest: "10.10.3.0/24"
        protocols: ["EtherNet-IP"]
        access_type: "operational"

  zone_3_utilities:
    tofino_appliance: "TOFINO-XN-003"
    deployment_mode: "inline_bridge"
    protected_assets:
      - name: "RTU-BOILER-01"
        ip: "10.10.4.10"
        vendor: "Schneider M340"
        protocols: ["Modbus-TCP/502"]
    authorized_communications:
      - source: "10.10.2.30"  # SCADA server
        dest: "10.10.4.0/24"
        protocols: ["Modbus-TCP"]
        allowed_function_codes: [1, 2, 3, 4]  # Read only from SCADA

Step 2: Configure Deep Packet Inspection Rules

python
#!/usr/bin/env python3
"""Tofino ICS Firewall Rule Generator.

Generates Tofino firewall rules with deep packet inspection for
industrial protocols based on communication baseline analysis.
"""

import json
import sys
from datetime import datetime
from typing import Dict, List


class TofinoRuleGenerator:
    """Generates Tofino ICS firewall DPI rules."""

    def __init__(self):
        self.rules = []
        self.rule_id = 1000

    def add_modbus_rule(self, src: str, dst: str, allowed_funcs: List[int],
                        allowed_registers: List[dict] = None, description: str = ""):
        """Generate Modbus DPI rule."""
        func_names = {
            1: "read_coils", 2: "read_discrete_inputs",
            3: "read_holding_registers", 4: "read_input_registers",
            5: "write_single_coil", 6: "write_single_register",
            15: "write_multiple_coils", 16: "write_multiple_registers",
        }

        rule = {
            "rule_id": self.rule_id,
            "protocol": "Modbus-TCP",
            "action": "ALLOW",
            "source": src,
            "destination": dst,
            "port": 502,
            "dpi_policy": {
                "allowed_function_codes": [
                    {"code": fc, "name": func_names.get(fc, f"FC{fc}")}
                    for fc in allowed_funcs
                ],
                "blocked_function_codes": [
                    fc for fc in range(1, 128) if fc not in allowed_funcs
                ],
            },
            "description": description,
            "log": True,
        }

        if allowed_registers:
            rule["dpi_policy"]["allowed_register_ranges"] = allowed_registers

        self.rules.append(rule)
        self.rule_id += 1
        return rule

    def add_s7comm_rule(self, src: str, dst: str, allowed_operations: List[str],
                        description: str = ""):
        """Generate S7comm DPI rule."""
        operation_map = {
            "read": {"function": 0x04, "name": "Read Variable"},
            "write": {"function": 0x05, "name": "Write Variable"},
            "setup": {"function": 0xF0, "name": "Setup Communication"},
            "download": {"function": 0x1A, "name": "Request Download"},
            "upload": {"function": 0x1D, "name": "Start Upload"},
            "cpu_stop": {"function": 0x29, "name": "PLC Stop"},
            "cpu_start": {"function": 0x28, "name": "PI Service (Start)"},
        }

        rule = {
            "rule_id": self.rule_id,
            "protocol": "S7comm",
            "action": "ALLOW",
            "source": src,
            "destination": dst,
            "port": 102,
            "dpi_policy": {
                "allowed_operations": [
                    operation_map[op] for op in allowed_operations if op in operation_map
                ],
                "block_cpu_stop": "cpu_stop" not in allowed_operations,
                "block_program_download": "download" not in allowed_operations,
            },
            "description": description,
            "log": True,
        }

        self.rules.append(rule)
        self.rule_id += 1
        return rule

    def add_ethernet_ip_rule(self, src: str, dst: str, allowed_services: List[str],
                              description: str = ""):
        """Generate EtherNet/IP CIP DPI rule."""
        rule = {
            "rule_id": self.rule_id,
            "protocol": "EtherNet-IP",
            "action": "ALLOW",
            "source": src,
            "destination": dst,
            "port": 44818,
            "dpi_policy": {
                "allowed_cip_services": allowed_services,
                "block_firmware_flash": True,
                "block_program_download": "program_download" not in allowed_services,
            },
            "description": description,
            "log": True,
        }

        self.rules.append(rule)
        self.rule_id += 1
        return rule

    def add_default_deny(self):
        """Add default deny rule at the end."""
        self.rules.append({
            "rule_id": 9999,
            "protocol": "ANY",
            "action": "DENY",
            "source": "ANY",
            "destination": "ANY",
            "port": "ANY",
            "description": "Default deny - block all unmatched traffic",
            "log": True,
        })

    def generate_config(self) -> str:
        """Generate complete Tofino firewall configuration."""
        config = {
            "tofino_configuration": {
                "generated": datetime.now().isoformat(),
                "appliance_model": "Tofino Xenon",
                "firmware_version": "4.2",
                "mode": "inline_bridge",
                "failsafe": "fail_open",
                "rules": self.rules,
            }
        }
        return json.dumps(config, indent=2)

    def print_summary(self):
        """Print rule summary."""
        print(f"\n{'='*65}")
        print("TOFINO ICS FIREWALL RULE SUMMARY")
        print(f"{'='*65}")
        print(f"Generated: {datetime.now().isoformat()}")
        print(f"Total Rules: {len(self.rules)}")

        for rule in self.rules:
            action_icon = "+" if rule["action"] == "ALLOW" else "X"
            print(f"\n  [{action_icon}] Rule {rule['rule_id']}: {rule.get('description', '')}")
            print(f"      {rule['source']} -> {rule['destination']}:{rule['port']}")
            print(f"      Protocol: {rule['protocol']}")
            if "dpi_policy" in rule:
                dpi = rule["dpi_policy"]
                if "allowed_function_codes" in dpi:
                    funcs = [f["name"] for f in dpi["allowed_function_codes"]]
                    print(f"      DPI - Allowed Modbus FCs: {', '.join(funcs)}")
                if "allowed_operations" in dpi:
                    ops = [o["name"] for o in dpi["allowed_operations"]]
                    print(f"      DPI - Allowed S7 Ops: {', '.join(ops)}")


if __name__ == "__main__":
    gen = TofinoRuleGenerator()

    # SCADA server to Modbus RTUs: read-only
    gen.add_modbus_rule(
        src="10.10.2.30",
        dst="10.10.4.0/24",
        allowed_funcs=[1, 2, 3, 4],
        description="SCADA to utilities RTUs - read only",
    )

    # Engineering workstation to Siemens PLCs: full access
    gen.add_s7comm_rule(
        src="10.10.2.50",
        dst="10.10.1.0/24",
        allowed_operations=["read", "write", "setup", "download", "upload"],
        description="Engineering WS to reactor PLCs - full engineering access",
    )

    # HMI to Siemens PLCs: read + write only (no program download)
    gen.add_s7comm_rule(
        src="10.10.2.10",
        dst="10.10.1.0/24",
        allowed_operations=["read", "write", "setup"],
        description="HMI to reactor PLCs - operational access only",
    )

    # HMI to Rockwell PLCs: operational access
    gen.add_ethernet_ip_rule(
        src="10.10.2.20",
        dst="10.10.3.0/24",
        allowed_services=["read_tag", "write_tag", "get_attribute"],
        description="HMI to packaging PLCs - operational access",
    )

    gen.add_default_deny()
    gen.print_summary()

Key Concepts

Term Definition
Tofino Xenon Belden/Hirschmann industrial firewall appliance with deep packet inspection for OT protocols
Deep Packet Inspection (DPI) Examining message payload content beyond headers to enforce fine-grained rules on industrial protocol operations
Inline Bridge Mode Transparent deployment mode where the firewall sits between network segments without requiring IP changes
Fail-Open Safety mode where firewall passes all traffic if the appliance fails, maintaining process availability
Loadable Security Module (LSM) Tofino plugin module providing protocol-specific DPI for Modbus, EtherNet/IP, OPC, or other protocols
Central Management Platform (CMP) Tofino centralized management server for deploying and managing policies across multiple Tofino appliances

Output Format

text
TOFINO DEPLOYMENT REPORT
===========================
Date: YYYY-MM-DD
Appliances Deployed: [count]

PER-APPLIANCE SUMMARY:
  [Appliance ID]:
    Mode: Inline Bridge
    Failsafe: Fail-Open
    Protected Assets: [count]
    Rules: [count]
    DPI Protocols: [list]

RULE SUMMARY:
  Allow Rules: [count]
  Deny Rules: [count]
  DPI-Enforced Rules: [count]

MONITORING:
  Blocked Packets (24h): [count]
  DPI Violations (24h): [count]

Arquivos desta versão

Permissões

PermissãoDeclaradaEncontrada na varredura
Lê arquivosNãoNão
Grava arquivosSimSim
Roda comandos no shellSimSim
Usa a redeSimSim
Usa conectoresNãoNão
Controla um navegadorNãoNão

Achados da varredura

Revisado em 13 de nov. de 2026

  1. MédiaArquivo · Script executável junto com a skillscripts/agent.py
  2. InfoLink · Links para domínios externos

Uma varredura limpa reduz o risco, mas não prova que o pacote é seguro. Leia o que você instala.

VersãoPublicada emCommitSHA-256AssinaturaMudança de permissão
v1.013 de nov. de 202654a7988c45fc121Assinada–

Pergunte tudo o que o seu escopo permite.

Crie a conta, adicione créditos e faça a primeira pergunta no chat ou no terminal.

  1. 1/3

    Crie a conta

    Individual ou empresa. Dá para virar empresa depois sem perder saldo nem chaves.

    Pessoa físicaEmpresa
  2. 2/3

    Adicione créditos

    No cartão. Você paga por token, sem assinatura.

    $5.00recarga mínima
  3. 3/3

    Pergunte

    No chat, ou instale o CLI e rode notholy login no terminal.

    $ notholy login