Vai al contenuto
New

DeepSeek V4.1 Flash free for 7 days: 10M tokens a day after a top-up of $10 or more. Until Nov 30.

How it works
aeondave/qemuReverse engineering e fuzzing

qemu

⁨Auth/lab ref: QEMU user-mode and full-system emulation for cross-arch binaries, firmware, kernels, disks, serial consoles, networking, and GDB stubs.⁩

v2026.11.13-21cd5683 installazioni+3 in 7 giorni39 StelleMITsincronizzato 11 ore fa

Installa

Non hai ancora la CLI di NotHoly? Installala prima.

$ curl -fsSL https://notholy.com/install.sh | sh
$ notholy skills install aeondave/qemu

Scrive in ⁦~/.notholy/skills⁩ dopo aver controllato la firma e lo SHA-256.

FirmaFirmato, ed25519
jvui3BeSuz…9zO7h4Dw==La CLI controlla lo SHA-256 e la firma prima di scrivere qualsiasi file.
Pacchetto53ec3d79…74706847
53ec3d79a56c…e0db747068471 file · ⁦1.8 KB⁩
ScansioneBassonessuna segnalazione
La scansione non ha trovato nulla da segnalare in questa versione.Vedi la scansione completa
Sorgentegithub.com/AeonDave/malskill/tree/main/offensive-tools/rev/qemu@21cd568

Questa voce non è ancora scritta in italiano, quindi è mostrata in un'altra lingua: English.

QEMU is the default public tool for cross-architecture user-mode execution and full-system virtual machines.

Choose mode

Need Mode
Run one Linux/BSD ELF with syscalls forwarded to host qemu-<arch> user-mode
Run a process inside an extracted rootfs qemu-<arch>-static in chroot/proot/container
Boot kernel/initrd/rootfs/disk/firmware qemu-system-<arch>
Debug kernel, bootloader, or process before start -S -gdb ... or user-mode -g
Expose serial/UART -serial stdio, -serial unix:..., -chardev ...
Expose guest services -netdev user,hostfwd=tcp:127.0.0.1:<host>-:<guest>

User-mode patterns

bash
qemu-arm -L ./sysroot ./target arg1
qemu-mipsel -L ./rootfs -strace ./usr/sbin/httpd
QEMU_LD_PREFIX=./rootfs qemu-aarch64 ./bin/app
qemu-riscv64 -g 1234 -L ./rootfs ./bin/app

If an existing file reports "No such file or directory", check the ELF interpreter and shared libraries:

bash
readelf -lW ./target | grep 'Requesting program interpreter'
readelf -dW ./target | grep NEEDED

Use -strace for syscall evidence. Use -g <port> plus gdb-multiarch when register/memory proof is needed.

Full-system patterns

bash
qemu-system-x86_64 \
  -kernel bzImage \
  -initrd initramfs.cpio.gz \
  -append "console=ttyS0 panic=-1" \
  -serial stdio -display none

qemu-system-mipsel \
  -M malta -kernel vmlinux \
  -drive file=rootfs.ext2,format=raw \
  -append "root=/dev/sda console=ttyS0" \
  -netdev user,id=n0,hostfwd=tcp:127.0.0.1:8080-:80 \
  -device e1000,netdev=n0 \
  -nographic

Discover available hardware:

bash
qemu-system-arm -machine help
qemu-system-arm -device help
qemu-system-aarch64 -cpu help

Do not assume the virt machine or virtio devices match vendor firmware. Old router kernels often need e1000, rtl8139, IDE, SD, or board-specific devices.

Debugging

bash
qemu-system-x86_64 -S -gdb tcp:127.0.0.1:1234 ...
gdb vmlinux
(gdb) target remote 127.0.0.1:1234

Use nokaslr or a deterministic load setup when setting breakpoints by symbol address. For boot sectors, set the GDB architecture to i8086.

Storage and images

bash
qemu-img info disk.img
qemu-img convert -O raw vendor.vmdk rootfs.raw
qemu-img resize scratch.qcow2 +256M

Prefer read-only source images and copy-on-write scratch layers for experiments. Record image format explicitly; guessing raw vs qcow2/vmdk causes misleading boot failures.

Validation signals

  • user-mode syscall trace reaches the behavior under study
  • serial console prints the expected boot/init line
  • GDB can halt at a relevant symbol/address
  • guest service responds through a localhost-bound forward
  • disk or filesystem mutation is visible in a scratch image

Failure triage

  • No output: wrong console, machine, DTB, storage root, or guest waiting before serial init.
  • Kernel panic: capture the full first panic line and root-device hints.
  • Network dead: check NIC model, guest IP, service process, firewall, and hostfwd syntax.
  • Illegal instruction: wrong CPU model or missing extension.
  • User-mode loader error: wrong sysroot/interpreter/libc version.

File di questa versione

Permessi

PermessoDichiaratoTrovato dalla scansione
Legge fileNoNo
Scrive fileNoNo
Esegue comandi shellSìSì
Usa la reteNoNo
Usa i connettoriNoNo
Controlla un browserNoNo

Segnalazioni della scansione

Rivisto il 13 nov 2026

La scansione non ha trovato nulla da segnalare in questa versione.

Una scansione pulita abbassa il rischio, ma non prova che il pacchetto sia sicuro. Leggi quello che installi.

VersionePubblicataCommitSHA-256FirmaCambio di permessi
v2026.11.13-21cd56813 nov 202621cd56853ec3d79Firmata–

Chiedi tutto quello che il tuo perimetro consente.

Crea un account, aggiungi crediti e fai la prima domanda in chat o nel terminale.

  1. 1/3

    Crea l'account

    Privato o azienda. Puoi passare ad azienda in seguito senza perdere saldo o chiavi.

    PrivatoAzienda
  2. 2/3

    Aggiungi crediti

    Con carta. Paghi a token, senza abbonamento.

    $5.00ricarica minima
  3. 3/3

    Chiedi

    In chat, oppure installa la CLI ed esegui notholy login nel terminale.

    $ notholy login