Saltar al contenido
Nuevo

DeepSeek V4.1 Flash gratis por 7 días: 10M tokens al día tras una recarga de $10 o más. Hasta el 30/11.

Cómo funciona
hlnd2t/generate-signature-for-globalvarIngeniería inversa y fuzzing

generate-signature-for-globalvar

⁨Generate and validate unique byte signatures for global variable using IDA Pro MCP. Use this skill when you need to create a pattern-scanning signature for a global variable that can reliably locate it across binary updates. Triggers: global variable signature, signature for global variable⁩

v2026.11.13-dcf20203 instalaciones+3 en 7 días67 EstrellasMITsincronizado hace 12 horas

Instalar

¿Aún no tienes la CLI de NotHoly? Instálala primero.

$ curl -fsSL https://notholy.com/install.sh | sh
$ notholy skills install hlnd2t/generate-signature-for-globalvar

Escribe en ⁦~/.notholy/skills⁩ después de comprobar la firma y el SHA-256.

FirmaFirmado, ed25519
k3s2u9drYH…CMaxdzAw==La CLI comprueba el SHA-256 y la firma antes de escribir cualquier archivo.
Paquetecfee7589…f08b5b28
cfee7589dfc5…9dcaf08b5b281 archivo · ⁦3.9 KB⁩
EscaneoBajosin hallazgos
El escaneo no encontró nada que señalar en esta versión.Ver el escaneo completo
Fuentegithub.com/HLND2T/CS2_VibeSignatures/tree/main/.claude/skills/generate-signature-for-globalvar@dcf2020

Esta entrada todavía no está escrita en tu idioma, así que aparece en English.

Generate a unique hex byte signature that locates an instruction accessing a global variable using fully programmatic wildcard detection and validation — no manual byte analysis required.

Core Concept

Since global variable addresses change between binary updates, we don't signature the GV itself. Instead, we:

  1. Find an instruction that references the global variable (mov/lea/cmp/etc.)
  2. Generate a signature to locate that instruction
  3. At runtime, parse the instruction to resolve the actual GV address

RIP-Relative Addressing (x86-64)

In x86-64, most global variable accesses use RIP-relative addressing:

text
GV_Address = Instruction_Address + Instruction_Length + RIP_Offset

Where:

  • Instruction_Address = address found by pattern scan
  • Instruction_Length = total bytes of the instruction (opcode + ModR/M + offset)
  • RIP_Offset = signed 32-bit displacement (last 4 bytes of instruction)

Prerequisites

  • Global variable address. qword_XXXXXX for example.
  • IDA Pro MCP session, resolved per mcp-ida-session.md: idb_list → idb_open (script fallback only if the endpoint is unreachable). Honor its IDB save discipline — an idle-TTL self-exit does not save.

Method

1. Generate and Validate Signature (Single Step)

Use a single py_eval call that:

  • Discovers candidate instructions accessing the GV via DataRefsTo
  • Verifies each candidate resolves to the target GV via RIP-relative displacement
  • Collects instruction stream with auto-wildcarding for each candidate
  • Tracks instruction boundaries so prefixes always cover complete instructions
  • Progressively tests at each instruction boundary via binary search
  • Outputs the shortest unique signature with full metadata

Note: If you already know the GV-accessing instruction address, set target_inst = <inst_addr>. If you know the containing function, set target_func = <func_addr>.

python
mcp__ida-pro-mcp__py_eval code="""
import idaapi, ida_bytes, idautils, ida_ua, ida_segment, json

def main():
    target_gv = <gv_addr>
    target_inst = None       # Set to instruction address if known, e.g. 0x1804F3DF3
    target_func = None       # Set to function address to restrict search, e.g. 0x1804F3DA0
    min_sig_bytes = 8
    max_sig_bytes = 96
    max_instructions = 64
    max_candidates = 32

    # --- Binary search wrapper (IDA 9.0+ find_bytes -> older bin_search fallback) ---
    def raw_bin_search(ea, max_ea, data, mask, flags=0):
        if hasattr(ida_bytes, 'find_bytes'):
            return ida_bytes.find_bytes(data, ea, range_end=max_ea, mask=mask, flags=flags)
        return ida_bytes.bin_search(ea, max_ea, data, mask, len(data), flags)

    # --- Search bounds ---
    seg = ida_segment.get_segm_by_name(".text")
    if seg:
        search_start, search_end = seg.start_ea, seg.end_ea
    else:
        search_start, search_end = idaapi.cvar.inf.min_ea, idaapi.cvar.inf.max_ea

    def resolve_disp_off(insn_ea, insn, raw):
        cand_offsets = set()
        for op in insn.ops:
            if int(op.type) == int(idaapi.o_void):
                continue
            offb = int(getattr(op, 'offb', 0))
            offo = int(getattr(op, 'offo', 0))
            if offb > 0 and offb + 4 <= insn.size:
                cand_offsets.add(offb)
            if offo > 0 and offo + 4 <= insn.size:
                cand_offsets.add(offo)
        for off in sorted(cand_offsets):
            disp_i32 = int.from_bytes(raw[off:off + 4], 'little', signed=True)
            resolved = (insn_ea + insn.size + disp_i32) & 0xFFFFFFFFFFFFFFFF
            if resolved == target_gv:
                return off
        return None

    def collect_and_validate(inst_ea, disp_off):
        f = idaapi.get_func(inst_ea)
        if not f:
            return None
        limit_end = min(f.end_ea, inst_ea + max_sig_bytes)
        sig_tokens = []
        inst_boundaries = []
        cursor = inst_ea
        first_len = None
        while cursor < f.end_ea and cursor < limit_end and len(sig_tokens) < max_sig_bytes:
            insn = idautils.DecodeInstruction(cursor)
            if not insn or insn.size <= 0:
                break
            raw = ida_bytes.get_bytes(cursor, insn.size)
            if not raw:
                break
            wild = set()
            for op in insn.ops:
                ot = int(op.type)
                if ot == int(idaapi.o_void):
                    continue
                if ot in (int(idaapi.o_imm), int(idaapi.o_near), int(idaapi.o_far), int(idaapi.o_mem), int(idaapi.o_displ)):
                    offb = int(getattr(op, 'offb', 0))
                    if offb > 0 and offb < insn.size:
                        dsz = ida_ua.get_dtype_size(getattr(op, 'dtype', getattr(op, 'dtyp', 0)))
                        if dsz <= 0:
                            dsz = insn.size - offb
                        for i in range(offb, min(insn.size, offb + dsz)):
                            wild.add(i)
                    offo = int(getattr(op, 'offo', 0))
                    if offo > 0 and offo < insn.size:
                        dsz2 = ida_ua.get_dtype_size(getattr(op, 'dtype', getattr(op, 'dtyp', 0)))
                        if dsz2 <= 0:
                            dsz2 = insn.size - offo
                        for i in range(offo, min(insn.size, offo + dsz2)):
                            wild.add(i)
            b0 = raw[0]
            if b0 in (0xE8, 0xE9, 0xEB):
                for i in range(1, insn.size):
                    wild.add(i)
            elif b0 == 0x0F and insn.size >= 2 and (raw[1] & 0xF0) == 0x80:
                for i in range(2, insn.size):
                    wild.add(i)
            elif 0x70 <= b0 <= 0x7F:
                for i in range(1, insn.size):
                    wild.add(i)
            if cursor == inst_ea:
                first_len = insn.size
                for i in range(disp_off, min(insn.size, disp_off + 4)):
                    wild.add(i)
            for idx in range(insn.size):
                sig_tokens.append("??" if idx in wild else f"{raw[idx]:02X}")
            inst_boundaries.append(len(sig_tokens))
            cursor += insn.size
        if not sig_tokens or first_len is None:
            return None
        for boundary in inst_boundaries:
            if boundary < min_sig_bytes:
                continue
            prefix_tokens = sig_tokens[:boundary]
            if all(t == "??" for t in prefix_tokens):
                continue
            data = bytes(0 if t == "??" else int(t, 16) for t in prefix_tokens)
            mask = bytes(0x00 if t == "??" else 0xFF for t in prefix_tokens)
            flags = ida_bytes.BIN_SEARCH_FORWARD | ida_bytes.BIN_SEARCH_NOBREAK
            matches = []
            ea = raw_bin_search(search_start, search_end, data, mask, flags)
            while ea != idaapi.BADADDR and len(matches) < 2:
                matches.append(ea)
                ea = raw_bin_search(ea + 1, search_end, data, mask, flags)
            if len(matches) == 1 and matches[0] == inst_ea:
                return {
                    "gv_sig": " ".join(prefix_tokens),
                    "sig_bytes": boundary,
                    "gv_sig_va": hex(inst_ea),
                    "gv_inst_length": first_len,
                    "gv_inst_disp": disp_off,
                }
        return None

    # --- Discover candidate GV-accessing instructions ---
    candidates_tried = 0
    best = None
    seen = set()

    def try_candidate(iea):
        nonlocal candidates_tried, best
        if iea in seen:
            return
        seen.add(iea)
        insn = idautils.DecodeInstruction(iea)
        if not insn or insn.size <= 0:
            return
        raw = ida_bytes.get_bytes(iea, insn.size)
        if not raw:
            return
        doff = resolve_disp_off(iea, insn, raw)
        if doff is None:
            return
        candidates_tried += 1
        result = collect_and_validate(iea, doff)
        if result is not None:
            if best is None or result["sig_bytes"] < best["sig_bytes"]:
                best = result

    if target_inst is not None:
        try_candidate(target_inst)
    elif target_func is not None:
        f = idaapi.get_func(target_func)
        if f:
            ea = f.start_ea
            while ea < f.end_ea and candidates_tried < max_candidates:
                fl = ida_bytes.get_full_flags(ea)
                if ida_bytes.is_code(fl):
                    try_candidate(ea)
                    if best is not None:
                        break
                nea = ida_bytes.next_head(ea, f.end_ea)
                if nea == idaapi.BADADDR or nea <= ea:
                    break
                ea = nea
    else:
        for ref in idautils.DataRefsTo(target_gv):
            if candidates_tried >= max_candidates:
                break
            fl = ida_bytes.get_full_flags(ref)
            if not ida_bytes.is_code(fl):
                continue
            try_candidate(ref)
            if best is not None:
                break

    if best:
        best["gv_va"] = hex(target_gv)
        best["gv_rva"] = hex(target_gv - idaapi.get_imagebase())
        best["gv_inst_offset"] = 0
        best["status"] = "success"
        print(json.dumps(best))
    else:
        print(json.dumps({
            "gv_va": hex(target_gv),
            "candidates_tried": candidates_tried,
            "error": "no unique gv-access signature found",
            "status": "failed"
        }))

main()
"""

Result handling:

  • status == "success" → Use gv_sig and metadata directly
  • status == "failed" → See Step 2

2. Iterate if Needed

If Step 1 returns status: "failed":

  1. Increase max_sig_bytes (e.g., to 192) and re-run Step 1
  2. Specify a different target_func to find more candidates
  3. Re-run until unique

3. Continue with Unfinished Tasks

If we are called by a task from a task list / parent SKILL, restore and continue with the unfinished tasks.

Output Format

Provide the following information for runtime GV resolution:

Required Output Fields

  1. gv_sig: Space-separated hex bytes with ?? for wildcards
  2. gv_sig_va: The virtual address that the signature matches
  3. gv_inst_offset: Always 0 (signature starts at the GV-accessing instruction)
  4. gv_inst_length: Total length of the GV-accessing instruction (from output metadata)
  5. gv_inst_disp: Position of the 4-byte RIP-relative offset within the instruction (from output metadata)

Example Output

yaml
gv_sig: "48 8B 1D ?? ?? ?? ?? 48 85 DB 0F 84 ?? ?? ?? ?? BD FF FF 00 00"
gv_sig_va: 0x1804f3df3     # The virtual address that the signature matches
gv_inst_offset: 0          # GV instruction starts at signature start
gv_inst_length: 7          # 48 8B 1D XX XX XX XX = 7 bytes
gv_inst_disp:   3          # Displacement offset start at position 3 (after 48 8B 1D)

Runtime Resolution Formula

At runtime, after pattern scan finds the signature at address scan_result:

cpp
// C++ example
uint8_t* inst_addr = scan_result + inst_offset;
int32_t rip_offset = *(int32_t*)(inst_addr + inst_disp);
void* gv_address = inst_addr + inst_length + rip_offset;
python
# Python example
import struct
inst_addr = scan_result + inst_offset
rip_offset = struct.unpack('<i', memory[inst_addr + inst_disp : inst_addr + inst_disp + 4])[0]
gv_address = inst_addr + inst_length + rip_offset

Archivos de esta versión

Permisos

PermisoDeclaradoHallado en el escaneo
Lee archivosNoNo
Escribe archivosNoNo
Ejecuta comandos de shellNoNo
Usa la redNoNo
Usa conectoresSíSí
Controla un navegadorNoNo

Hallazgos del escaneo

Revisado el 13 nov 2026

El escaneo no encontró nada que señalar en esta versión.

Un escaneo limpio baja el riesgo, pero no prueba que el paquete sea seguro. Lee lo que instalas.

VersiónPublicadaCommitSHA-256FirmaCambio de permisos
v2026.11.13-dcf202013 nov 2026dcf2020cfee7589Firmada–

Pregunta todo lo que tu alcance permite.

Crea la cuenta, añade créditos y haz la primera pregunta en el chat o en la terminal.

  1. 1/3

    Crea la cuenta

    Individual o empresa. Puedes pasar a empresa después sin perder saldo ni claves.

    IndividualEmpresa
  2. 2/3

    Añade créditos

    Con tarjeta. Pagas por token, sin suscripción.

    $5.00recarga mínima
  3. 3/3

    Pregunta

    En el chat, o instala el CLI y ejecuta notholy login en tu terminal.

    $ notholy login