Saltar al contenido
Nuevo

DeepSeek V4.1 Flash gratis por 7 días: 10M tokens al día tras una recarga de $10 o más. Hasta el 30/11.

Cómo funciona
hlnd2t/fix-cppheadersInformes y cumplimiento

fix-cppheaders

⁨Use when s2sdk C++ headers must be repaired to match the latest vtable or record-layout YAML references. Runs run_cpp_tests.py to obtain layout diffs, maps failing cpp_tests entries to their configured headers, edits only those headers, and repeats validation until the differences are resolved. Trig⁩

v2026.11.13-dcf20203 instalaciones+3 en 7 días67 EstrellasMITsincronizado hace 11 horas

Instalar

¿Aún no tienes la CLI de NotHoly? Instálala primero.

$ curl -fsSL https://notholy.com/install.sh | sh
$ notholy skills install hlnd2t/fix-cppheaders

Escribe en ⁦~/.notholy/skills⁩ después de comprobar la firma y el SHA-256.

FirmaFirmado, ed25519
rfqimrzHvZ…clQe9ACA==La CLI comprueba el SHA-256 y la firma antes de escribir cualquier archivo.
Paquete66566284…44449601
6656628474a5…426c444496012 archivos · ⁦2.0 KB⁩
EscaneoBajosin hallazgos
El escaneo no encontró nada que señalar en esta versión.Ver el escaneo completo
Fuentegithub.com/HLND2T/CS2_VibeSignatures/tree/main/.claude/skills/fix-cppheaders@dcf2020

Esta entrada todavía no está escrita en tu idioma, así que aparece en English.

Overview

Repair s2sdk declarations from compiler-versus-YAML layout differences. Treat run_cpp_tests.py as the source of truth for both the initial diff and final verification.

Resolve GAMEVER from the user's explicit request or CS2VIBE_GAMEVER; use only configs/$GAMEVER.yaml for test definitions and fail if it is missing.

Constraints

  • Edit only header paths listed in the failing configs/<GAMEVER>.yaml cpp_tests entry.
  • Require every edited header to be under s2sdk/.
  • Preserve existing names and style when the reference exposes only a slot or offset.
  • Keep compiler declarations for gaps in incomplete reference YAMLs unless surrounding index shifts prove removal.
  • Name unknown virtual slots consistently with nearby declarations, such as unk_001; when only a known function name is available, use virtual void FunctionName() = 0; until a reliable prototype is known.
  • Interpret Class_dtor and Class_vdtor reference entries as virtual destructors for Class.
  • Do not edit reference YAMLs, tracked bin_artifacts, cpp test sources, or comparison code to hide a difference.
  • Do not invoke an external agent runner. This SKILL owns the repair loop directly.
  • Stop and report a blocker when the diff is ambiguous, the configured header is missing, or a required edit is outside s2sdk/.

Workflow

  1. Determine the game version from the user's request. If omitted, read CS2VIBE_GAMEVER from .env.

  2. Resolve a release-local immutable symbol candidate. Use a caller-provided actual candidate when available; otherwise build one from tracked bin_artifacts/<gamever>/ with gamesymbol_candidate.py build and explicit temporary output/ session paths. Never use a tracked gamesymbols/ fallback or read per-symbol truth from bin/.

  3. Run the complete comparison with debug details:

    powershell
    uv run run_cpp_tests.py -gamever <gamever> -configyaml configs/<gamever>.yaml -snapshot <snapshot> -debug
  4. For each test reporting layout differences, find its cpp_tests entry in configs/<GAMEVER>.yaml and read its symbol, headers, target, aliases, and reference modules.

  5. Read the configured headers and the complete diff sections:

    • Current vtable entries versus YAML reference vtable entries
    • Current record members versus YAML reference struct members
  6. Make the smallest declaration-only edit that aligns the header with the reference. Typical edits are reordering, adding, or removing virtual declarations; correcting inheritance; and adjusting record members or padding.

  7. Re-run the same command with the same snapshot. If differences remain, use the new output rather than the previous diff and repeat.

  8. Finish only when the command exits successfully with zero compile failures, invalid items, and layout differences.

Failure Handling

  • If compilation fails after an edit, inspect the compiler error, repair the edited declaration, and rerun.
  • If unrelated pre-existing failures prevent a clean full run, verify the affected test output as far as the runner permits and report the unrelated failures verbatim.
  • If headers is absent or empty, do not guess an edit target. Report the test name and request a config correction.
  • If multiple headers are configured, trace the declared symbol before choosing the file; do not edit every header blindly.

Completion Report

Report the headers changed, the layout mismatches corrected, and the exact final verification command and result.

Archivos de esta versión

Permisos

PermisoDeclaradoHallado en el escaneo
Lee archivosNoNo
Escribe archivosNoNo
Ejecuta comandos de shellSíSí
Usa la redNoNo
Usa conectoresNoNo
Controla un navegadorNoNo

Hallazgos del escaneo

Revisado el 13 nov 2026

El escaneo no encontró nada que señalar en esta versión.

Un escaneo limpio baja el riesgo, pero no prueba que el paquete sea seguro. Lee lo que instalas.

VersiónPublicadaCommitSHA-256FirmaCambio de permisos
v2026.11.13-dcf202013 nov 2026dcf202066566284Firmada–

Pregunta todo lo que tu alcance permite.

Crea la cuenta, añade créditos y haz la primera pregunta en el chat o en la terminal.

  1. 1/3

    Crea la cuenta

    Individual o empresa. Puedes pasar a empresa después sin perder saldo ni claves.

    IndividualEmpresa
  2. 2/3

    Añade créditos

    Con tarjeta. Pagas por token, sin suscripción.

    $5.00recarga mínima
  3. 3/3

    Pregunta

    En el chat, o instala el CLI y ejecuta notholy login en tu terminal.

    $ notholy login