Saltar al contenido
Nuevo

DeepSeek V4.1 Flash gratis por 7 días: 10M tokens al día tras una recarga de $10 o más. Hasta el 30/11.

Cómo funciona
aeondave/hypothesis-drivenIngeniería inversa y fuzzing

hypothesis-driven

⁨Investigate an uncertain cause using testable hypotheses and discriminating evidence. Use for persistent bugs, flaky behavior, incident diagnosis, or conflicting research observations; skip routine edits with a known solution.⁩

v2026.11.13-21cd5683 instalaciones+3 en 7 días39 EstrellasMITsincronizado hace 11 horas

Instalar

¿Aún no tienes la CLI de NotHoly? Instálala primero.

$ curl -fsSL https://notholy.com/install.sh | sh
$ notholy skills install aeondave/hypothesis-driven

Escribe en ⁦~/.notholy/skills⁩ después de comprobar la firma y el SHA-256.

FirmaFirmado, ed25519
h0VuNghKCc…2yIKNlBA==La CLI comprueba el SHA-256 y la firma antes de escribir cualquier archivo.
Paquetedbce00e1…b4f54816
dbce00e14d5c…9e1cb4f548163 archivos · ⁦9.3 KB⁩
EscaneoMedio2 hallazgos
  • injection.no_confirmationSKILL.md:105
  • injection.no_confirmationreferences/hypothesis-patterns.md:133
Ver el escaneo completo
Fuentegithub.com/AeonDave/malskill/tree/main/behaviours/hypothesis-driven@21cd568

Esta entrada todavía no está escrita en tu idioma, así que aparece en English.

When to activate

  • A bug, crash, regression, or flaky behavior resists two or more direct fixes.
  • A CTF, exploit, or reversing challenge has many possible paths and no obvious next step.
  • An incident, outage, or unexpected production behavior has unclear scope or cause.
  • Research, fuzzing, or scanner output points in multiple directions and must be triaged.
  • The symptom is far from the likely cause: heap corruption, async timing, protocol state, ABI mismatch, cache coherence, cryptographic oracle, side channel, supply chain.
  • The agent notices itself looping, repeating searches, or escalating tools without new evidence.

Do not activate for trivial fixes, single-line typos, or tasks where the user already gave a step-by-step procedure. Prefer the smallest competent workflow.

Core rules

  • Hypotheses must be falsifiable. If no observation could disprove it, it is not a hypothesis — it is a belief.
  • Reduce before deep-diving. Shrink noisy inputs, traces, repro steps, or artifact scope until the failure still occurs with minimal irrelevant detail.
  • Make comparisons interpretable. Control relevant variables and predict how competing explanations would differ. One experiment may distinguish several hypotheses; avoid unrelated simultaneous changes.
  • Record consequential results. Keep a compact working note when it prevents repeated investigation or supports a handoff; a separate log is unnecessary for a short diagnosis.
  • Evidence wins over preference. When data contradicts a favorite hypothesis, kill the hypothesis, not the data.
  • Bound negative claims. No observed failure is not proof of impossibility. A deductive proof can establish a claim within explicit assumptions; empirical results cover the tested conditions. Name which basis supports the conclusion and what remains outside it.
  • Reassess repeated failure. Recheck assumptions, measurements, and environment when attempts stop yielding information; a retry count alone does not identify the cause.

Workflow

  1. Frame the problem

    • Restate the symptom in one precise sentence: what is observed, where, when, under which conditions.
    • List what is known, what is assumed, and what is unknown. Separate facts from inference.
    • Preserve a reproducer or evidence baseline. If the input/artifact/log is large, reduce it first while keeping the same failure signal.
    • Define a falsification target: "this hypothesis is wrong if I see X."
  2. Generate hypotheses (breadth before depth)

    • Enumerate plausible causes when evidence leaves a real ambiguity. Do not manufacture alternatives to meet a quota; causes may coexist.
    • Group candidates when the list becomes hard to compare, and retain assumptions that have not yet been tested.
    • Build a diagnostic "why" tree before jumping to a solution "how" tree; solution ideas are premature until the cause branch is supported.
    • For each candidate, note the mechanism: how would this cause produce the observed symptom?
    • Mark candidates that cannot currently be tested as unresolved; missing access or tooling does not refute them.
  3. Prioritize

    • Score each hypothesis on three axes: prior likelihood, cost to test, and information gained if disproven.
    • Test cheapest-and-most-informative first. A fast experiment that eliminates a whole branch beats a slow one that only refines a narrow guess.
    • Prefer experiments that bisect the unknown space (binary search of the hypothesis tree).
  4. Design the experiment

    • State the prediction: "if hypothesis H is true, then doing X will produce Y."
    • State the falsifier: "if I see Z instead, H is wrong."
    • Choose the smallest reliable observation: log, breakpoint, sanitizer, packet capture, syscall trace, oracle query, diff, replay, controlled input.
    • Prefer probes that expose structure: assertions/contracts for invariants, dependency tracing or slicing for value origins, and hypothesis-tagged instrumentation for runtime facts.
    • Add a negative control when possible: an input or condition where the hypothesis predicts no effect.
  5. Run and record

    • Execute the experiment unchanged. Resist the urge to modify mid-run.
    • Capture raw evidence: command, input, output, timestamp/context, environment, version. Tag temporary logs or probes with the hypothesis ID so evidence stays attributable.
    • Record the verdict next to the hypothesis: supported, refuted, inconclusive, blocked.
  6. Update beliefs (Bayesian, not stubborn)

    • If refuted: cross it out and move on. Do not resurrect without new evidence.
    • If supported: refine into a more specific sub-hypothesis. One supportive experiment is not proof.
    • If inconclusive: ask why the experiment was weak before designing the next one. Often the falsifier was not sharp enough.
    • Pause and re-frame whenever evidence contradicts a foundational assumption.
  7. Converge to a diagnosis

    • A supported diagnosis accounts for the relevant observations and survives a discriminating check. Note unexplained evidence and competing contributors; a single correct prediction is not proof.
    • Before acting on it, write the causal chain end-to-end: defect → faulty state → mechanism → observed symptom. If a link is hand-waved, the diagnosis is incomplete.
    • Show both causality and incorrectness: why this state caused the failure, and why the state itself is wrong rather than merely surprising.
  8. Act, then verify

    • Apply the smallest change that the diagnosis predicts will work.
    • Re-run the original reproducer and a relevant control when it distinguishes the proposed cause from alternatives.
    • When safe, run a counter-experiment: revert the fix or reintroduce the condition and confirm the original symptom returns.
    • If the symptom is resolved but the cause remains uncertain, distinguish verified recovery from a confirmed root cause.

Hypothesis log format

Keep it short. Update in place; do not let it grow into prose.

text
H1: <one-line hypothesis>
  Mechanism: <how it would cause the symptom>
  Predicts:  <observation expected if H1 is true>
  Falsifier: <observation that would disprove H1>
  Test:      <command / experiment>
  Evidence:  <raw output, link, or summary>
  Verdict:   supported | refuted | inconclusive | blocked

For a recurring reasoning failure, load references/cognitive-biases.md.

Domain-specific accents

  • Debugging: minimize the reproducer, isolate environment, then bisect the code/data path with the cheapest instrumentation. Add assertions around invariants and trace data/control dependencies when the bad value's origin is unclear. Pair with systematic-debugging and test-driven-development.
  • CTF / exploit research: enumerate attack surfaces before deep-diving one. Use oracles and probes that return distinguishable outputs (yes/no, timing, length). Bias toward experiments that eliminate whole categories (auth vs injection vs deserialization vs logic).
  • Reverse engineering: separate observations (what the binary does) from inferences (why). Confirm guessed semantics with a controlled input before generalizing.
  • Incident response: enumerate possible contributors before naming a root cause; distinguish root cause, trigger, contributing factors, impact, and mitigation. Correlate timelines, deploys, configs, and dependencies. Action items should be owned, measurable, and aimed at prevention or faster detection, not blame.
  • Research and data analysis: pre-register the prediction before running the query; otherwise the analysis silently fits the data to the favorite story.

Stop conditions

  • The diagnosis is complete: the causal chain is explicit and reproduces the symptom on demand.
  • The next experiment requires access, authorization, or destructive action beyond approved scope — pause and escalate.
  • Repeated fixes add no evidence: stop patching and re-open assumptions.
  • Evidence contradicts a load-bearing assumption: re-frame before generating more hypotheses on a broken foundation.

Output contract

When reporting investigation results, include:

  • Symptom: the precise observable being explained.
  • Diagnosis: the supported causal chain, or "no diagnosis yet" with current best hypotheses.
  • Evidence: experiments that confirmed it and at least one that ruled out a credible alternative.
  • Limits: what was not tested, what assumptions remain.
  • Next step: smallest action to either act on the diagnosis or sharpen it.

Resources

Load on demand:

  • references/hypothesis-patterns.md — hypothesis templates and falsifier examples per domain (debugging, CTF/exploit, reversing, incident, research).
  • references/cognitive-biases.md — biases that derail investigation and counter-moves to apply during it.

Pair with:

  • systematic-debugging for code-level reproduction, instrumentation, and patching once the hypothesis narrows to a code defect.
  • loop-control-and-pivots when three attempts have failed and the mental model likely needs re-framing before more work.
  • evidence-before-claims before reporting a cause, vulnerability, or fix as confirmed.
  • verification-before-completion before claiming the investigation is done.
  • design-before-implementation when the diagnosis triggers a non-trivial change.
  • known-problem-hint-research when external evidence could identify or discriminate hypotheses, including when no useful hypothesis is available yet.

Archivos de esta versión

Permisos

PermisoDeclaradoHallado en el escaneo
Lee archivosNoNo
Escribe archivosNoNo
Ejecuta comandos de shellNoNo
Usa la redNoNo
Usa conectoresNoNo
Controla un navegadorNoNo

Hallazgos del escaneo

Revisado el 13 nov 2026

  1. MediaPrompt injection · injection.no_confirmationSKILL.md:105
  2. MediaPrompt injection · injection.no_confirmationreferences/hypothesis-patterns.md:133

Un escaneo limpio baja el riesgo, pero no prueba que el paquete sea seguro. Lee lo que instalas.

VersiónPublicadaCommitSHA-256FirmaCambio de permisos
v2026.11.13-21cd56813 nov 202621cd568dbce00e1Firmada–

Pregunta todo lo que tu alcance permite.

Crea la cuenta, añade créditos y haz la primera pregunta en el chat o en la terminal.

  1. 1/3

    Crea la cuenta

    Individual o empresa. Puedes pasar a empresa después sin perder saldo ni claves.

    IndividualEmpresa
  2. 2/3

    Añade créditos

    Con tarjeta. Pagas por token, sin suscripción.

    $5.00recarga mínima
  3. 3/3

    Pregunta

    En el chat, o instala el CLI y ejecuta notholy login en tu terminal.

    $ notholy login