Saltar al contenido
Nuevo

DeepSeek V4.1 Flash gratis por 7 días: 10M tokens al día tras una recarga de $10 o más. Hasta el 30/11.

Cómo funciona
aeondave/arduinoMóvil, firmware y hardware

arduino

⁨Build, review, debug, and scaffold professional Arduino projects across classic AVR boards (`Uno`, `Nano`, `Mega`), Renesas-based R4 boards (`Uno R4 Minima`, `Uno R4 WiFi`, `Nano R4`), ESP32-based Arduino boards, and other common Arduino-family targets. Use when asked for sketches, `.ino` files, Ard⁩

v2026.11.13-21cd5683 instalaciones+3 en 7 días39 EstrellasMITsincronizado hace 11 horas

Instalar

¿Aún no tienes la CLI de NotHoly? Instálala primero.

$ curl -fsSL https://notholy.com/install.sh | sh
$ notholy skills install aeondave/arduino

Escribe en ⁦~/.notholy/skills⁩ después de comprobar la firma y el SHA-256.

FirmaFirmado, ed25519
wKIdLMSpJo…m3IpmMBQ==La CLI comprueba el SHA-256 y la firma antes de escribir cualquier archivo.
Paquete43bc100a…c1256517
43bc100adb64…1825c12565175 archivos · ⁦8.2 KB⁩
EscaneoBajosin hallazgos
El escaneo no encontró nada que señalar en esta versión.Ver el escaneo completo
Fuentegithub.com/AeonDave/malskill/tree/main/hardware/arduino@21cd568

Esta entrada todavía no está escrita en tu idioma, así que aparece en English.

This skill is for end-to-end Arduino work that must survive contact with real hardware: board selection, wiring, firmware structure, PlatformIO, testing, debugging, and troubleshooting.

If the task is mainly about choosing sensors or dealing with noisy detection in robotics/domotica, also load sensors.

Workflow

  1. Lock the target board, toolchain, and capability profile.

    • Prefer exact names: Arduino Uno, Uno R4 WiFi, Nano ESP32, ESP32 Dev Module, etc.
    • Lock the toolchain: Arduino IDE 2, Arduino CLI, PlatformIO, or Arduino Cloud.
    • If the target is unknown, state assumptions and choose the narrowest safe target.
    • Immediately note: board family, voltage domain, resource limits, reserved pins, wireless stack.
  2. Plan hardware and wiring before code structure.

    • Separate inputs, outputs, buses, interrupts, and high-current loads.
    • Document pull-up or pull-down assumptions, current draw, and shared grounds.
    • Call out when motors, relays, LEDs, displays, or radio modules need external power, drivers, transistors, or level shifting.
  3. Choose the right project shape.

    • Use a single .ino only for small sketches or fast experiments.
    • For reusable or testable firmware, split pure logic from hardware access.
    • For professional or multi-file work, prefer PlatformIO with src/, lib/, include/, and test/.
    • When migrating from Arduino sketches to PlatformIO, remember that .ino preprocessing disappears: add #include <Arduino.h>, proper headers, and forward declarations.
  4. Write firmware for bring-up, maintenance, and testability.

    • Keep pin constants, feature flags, calibration values, and timing constants centralized.
    • Prefer millis() scheduling, finite-state machines, or task-style loops over long blocking delay() chains.
    • Isolate pure logic so it can be unit-tested without hardware.
    • Add serial diagnostics that help first power-on, but avoid unbounded serial spam.
    • Use compile-time flags or config constants for optional hardware and verbose logging.
  5. Define a verification ladder before finishing.

    • Smoke test: compile, upload, and confirm a minimal heartbeat or serial log.
    • Functional test: verify each sensor, bus, actuator, and failure path.
    • For PlatformIO projects, include build, upload, monitor, and test steps.
    • If the board supports debugging, include a debug plan and probe assumptions.
    • If the board does not support practical source-level debugging, fall back to serial tracing, staged bring-up, and smaller test sketches.
  6. Deliver complete output.

    • firmware files
    • wiring table / pin map
    • library or dependency list
    • board/toolchain assumptions
    • first power-on checklist
    • test plan
    • troubleshooting notes for the most likely failure modes

Board-family rules

Load references/board-families.md for full details. Minimum awareness without loading the reference:

  • Classic AVR: tight RAM/flash; avoid String abuse and large buffers; D0/D1 are serial-sensitive.
  • Renesas R4: not a faster AVR; check USB behavior, timers, analog resolution, and extra peripherals.
  • ESP32-based: 3.3V logic; be explicit about radio constraints and boot-sensitive pins.
  • Native USB: while (!Serial) {} blocks autonomous boot; serial port can disappear on reset.

Review checklist

  • board target is explicit
  • toolchain is explicit (Arduino IDE 2, Arduino CLI, or PlatformIO)
  • pin map in code matches pin map in docs
  • analog/digital assumptions are documented
  • power and voltage-domain notes are present
  • blocking delay() use is justified or removed
  • optional hardware is behind flags or clearly separated
  • first bring-up and troubleshooting path exists
  • PlatformIO config, if present, matches the board and monitor assumptions
  • library and dependency versions are pinned when reproducibility matters

Output rules

  • Do not claim portability across boards when using board-specific pins.
  • Do not invent a PlatformIO board ID, upload protocol, or debugger choice.
  • Do not scatter GPIO numbers through the code.
  • Do not leave voltage-domain assumptions implicit.
  • Do not recommend powering motors, servos, relays, or LED strips directly from a board pin.
  • Call out when serial debugging may fail because of board/port selection, driver issues, baud mismatch, native USB resets, or while (!Serial) {}.
  • For Uno R4 WiFi, mention board-specific caveats when they matter: Qwiic is 3.3V on Wire1, HID can change the USB port, and direct ESP32 programming can break the default bridge firmware.
  • If a sensor needs protection or signal conditioning, say so clearly.
  • Pin library versions in dependency lists and lib_deps when the project needs reproducibility.

When to load references

  • Load references/project-patterns.md for project shape, architecture, OTA guidance, bring-up flow, and deliverables.
  • Load references/pin-planning.md when assigning GPIOs, documenting wiring, or checking bus and voltage constraints.
  • Load references/board-families.md when selecting a board, comparing families, or explaining board-specific caveats.
  • Load references/platformio-testing-debugging.md when the request mentions PlatformIO, tests, upload issues, serial monitor issues, or debugging.

Resources

references/

  • references/project-patterns.md — project intake, architecture, deliverable bundles, and first-power-on workflow.
  • references/pin-planning.md — GPIO planning, voltage-domain checks, bus mapping, and wiring-output format.
  • references/board-families.md — practical differences between AVR, R4, ESP32-based, and native-USB Arduino targets.
  • references/platformio-testing-debugging.md — PlatformIO structure, migration guidance, unit testing, debugging, and troubleshooting.

Archivos de esta versión

Permisos

PermisoDeclaradoHallado en el escaneo
Lee archivosNoNo
Escribe archivosSíSí
Ejecuta comandos de shellNoNo
Usa la redNoNo
Usa conectoresSíSí
Controla un navegadorNoNo

Hallazgos del escaneo

Revisado el 13 nov 2026

El escaneo no encontró nada que señalar en esta versión.

Un escaneo limpio baja el riesgo, pero no prueba que el paquete sea seguro. Lee lo que instalas.

VersiónPublicadaCommitSHA-256FirmaCambio de permisos
v2026.11.13-21cd56813 nov 202621cd56843bc100aFirmada–

Pregunta todo lo que tu alcance permite.

Crea la cuenta, añade créditos y haz la primera pregunta en el chat o en la terminal.

  1. 1/3

    Crea la cuenta

    Individual o empresa. Puedes pasar a empresa después sin perder saldo ni claves.

    IndividualEmpresa
  2. 2/3

    Añade créditos

    Con tarjeta. Pagas por token, sin suscripción.

    $5.00recarga mínima
  3. 3/3

    Pregunta

    En el chat, o instala el CLI y ejecuta notholy login en tu terminal.

    $ notholy login