Skip to content
New

DeepSeek V4.1 Flash free for 7 days: 10M tokens a day after a top-up of $10 or more. Until Nov 30.

How it works
aeondave/hardware-ctfMobile, firmware and hardware

hardware-ctf

⁨Lab/CTF: hardware/embedded/RF challenges; Saleae/sigrok traces, UART/I2C/SPI/CAN/JTAG/SWD/USB/BLE/RF, firmware, side-channel data.⁩

v2026.11.13-21cd5683 installs+3 in 7 days39 StarsMITsynced 10 hours ago

Install

No NotHoly CLI yet? Install it first.

$ curl -fsSL https://notholy.com/install.sh | sh
$ notholy skills install aeondave/hardware-ctf

Writes to ⁦~/.notholy/skills⁩ after checking the signature and the SHA-256.

SignatureSigned, ed25519
AwQttAe6iA…YhFT55Cg==The CLI checks the SHA-256 and the signature before it writes a file.
Package0a99bc37…d4f96325
0a99bc376e88…3d1cd4f963254 files · ⁦10.2 KB⁩
ScanMedium2 findings
  • injection.no_confirmationreferences/debug-ports-and-firmware-extraction.md:81
  • Links to outside domains
See the full scan
Sourcegithub.com/AeonDave/malskill/tree/main/offensive-ctf/hardware-ctf@21cd568

Solve hardware and embedded lab tasks by identifying the capture or device interface first, then decoding with timing, voltage, framing, and architecture assumptions made explicit.

When this skill applies

  • Logic analyzer captures, Saleae .sal files, sigrok sessions, CSV edge traces, oscilloscope traces, audio captures of serial data, or display-signal samples.
  • UART, I2C, SPI, CAN, CANopen, JTAG, SWD, USB HID, USB MIDI, Bluetooth RFCOMM/BLE, RF/SDR, RFID/NFC, or peripheral PCAPs.
  • Firmware images, SPI flash dumps, UEFI/BIOS blobs, bootloaders, microcontroller binaries, extracted filesystems, board photos, pinouts, schematics, CAD, G-code, or 3D-printing artifacts.
  • Side-channel data such as power traces, timing traces, acoustic keyboard samples, LED Morse, or EM/RF measurements.

Operating model

  1. Preserve evidence and identify artifact class: capture, firmware, board/interface, RF sample, side-channel dataset, or CAD/G-code.
  2. Lock physical assumptions: sample rate, voltage domain, channel order, idle level, clock, endian, bit order, modulation, architecture, and toolchain.
  3. Decode the transport before interpreting payloads: bus framing, packet boundaries, checksums, compression, filesystem, or symbol timing.
  4. Choose the narrowest tool path: protocol decoder, firmware extractor, disassembler, emulator, SDR flowgraph, side-channel statistic, or visualization.
  5. Validate by reconstructing an observable: secret bytes, image, waveform, register trace, firmware string, UART console output, HID path, RF message, or 3D geometry.
  6. Record every assumption that affects decoding so the proof can be replayed or corrected.

Technique integration

Load these as needed:

  • forensic-technique for evidence handling, carving, metadata, timelines, and PCAP/peripheral reconstruction.
  • reversing-technique for firmware, bootloaders, microcontroller binaries, and custom parsers.
  • wireless-technique for RF/SDR, Bluetooth, Wi-Fi-derived, or radio telemetry tasks.
  • network-technique for USB/Bluetooth/CAN PCAPs and protocol captures.
  • web-ctf when a hardware challenge exposes an HTTP or browser-based transceiver, status panel, or session-backed control plane around the decoded protocol.
  • arduino when a task requires real microcontroller wiring, sketches, Arduino CLI, PlatformIO, or board bring-up.
  • python-patterns and systematic-debugging for decoders, parsers, visualization, and reproducible notebooks/scripts.

Tool routing

  • Logic/bus: saleae-logic-2, sigrok/PulseView, sigrok-cli, logic2 automation, Python edge decoders, and protocol decoders.
  • Firmware: binwalk, strings, dd, unsquashfs, UEFITool, chipsec, flashrom, ghidra, radare2, binaryninja, QEMU, and OpenOCD.
  • RF/SDR: GNU Radio, Universal Radio Hacker, rtl_433, inspectrum, spectrum tooling, numpy/scipy, and custom demodulators.
  • Peripheral captures: wireshark, tcpdump, usbmon, bluez, HID report parsers, MIDI decoders, and image/path reconstruction scripts.
  • Side-channel: numpy, scipy, pandas, matplotlib, correlation/DPA scripts, FFT/spectrogram tooling, and clustering/classification only after the signal is understood.
  • CAD/G-code: slicer-aware parsers, zlib/heatshrink/QOI decoders, mesh viewers, coordinate projection, and metadata extraction.

Safety and scope gates

  • Do not recommend wiring, flashing, or probing real hardware until voltage, ground, pin role, and target ownership are explicit.
  • Prefer offline decoding over physical interaction when artifacts are sufficient.
  • Avoid write operations through JTAG/SWD/SPI/flashrom unless an isolated lab target and recovery path are clear.
  • Treat unknown pins as unsafe; identify power, ground, reset, boot, UART, and debug pins before connecting tools.
  • For RF, follow local legal and lab constraints; passive analysis and replay in shielded or simulated environments are safer defaults.

Quick pivots

  • Logic capture: infer sample rate, channels, idle levels, clock, start/stop bits, and bus decoder settings.
  • UART: test baud, parity, stop bits, inversion, and line endings before parsing text.
  • I2C/SPI: identify clock/data/chip-select, address or opcode patterns, and multi-byte endian.
  • CAN: group arbitration IDs, infer periodic frames, counters, checksums, and signal scaling.
  • JTAG/SWD: identify pins non-destructively, confirm chain/device ID, then dump or halt only in lab scope.
  • Firmware: extract filesystem, identify architecture, search strings/configs, then reverse validation paths.
  • RF/SDR: identify sample format, center frequency, symbol rate, modulation, framing, whitening, and checksum.
  • Hybrid RF + web control plane: decode the burst offline first, then use UI state, session fields, or mission text as a control-plane oracle; re-decode each fresh capture instead of assuming a prior instance's exact bytes still apply.
  • Side-channel: align traces, average noise, find leakage point, then validate recovered key/material independently.

Resources

  • references/hardware-artifact-workflow.md — Load for capture, bus, firmware, RF, side-channel, fault-injection evidence or CAD/G-code triage.
  • references/debug-ports-and-firmware-extraction.md — load for UART/JTAG/SWD/SPI/eMMC pivots, bootloader access, flash dumping, and recovery-first extraction.
  • references/rf-and-sdr-decoding.md — load for IQ captures, SDR demodulation, BLE hopping analysis, and physical-layer validation before payload interpretation.

Files in this version

Permissions

PermissionDeclaredFound by the scan
Reads filesNoNo
Writes filesYesYes
Runs shell commandsNoNo
Uses the networkYesYes
Uses connectorsNoNo
Drives a browserNoNo

Scan findings

Reviewed on Nov 13, 2026

  1. MediumPrompt injection · injection.no_confirmationreferences/debug-ports-and-firmware-extraction.md:81
  2. InfoLink · Links to outside domains

A clean scan lowers the risk but does not prove a package is safe. Read what you install.

VersionPublishedCommitSHA-256SignaturePermission change
v2026.11.13-21cd568Nov 13, 202621cd5680a99bc37Signed–

Ask anything your scope allows.

Create an account, add credits and ask the first question in the chat or the terminal.

  1. 1/3

    Create the account

    Individual or company. You can switch to a company later without losing balance or keys.

    IndividualCompany
  2. 2/3

    Add credits

    By card. Pay per token, no subscription.

    $5.00minimum deposit
  3. 3/3

    Ask

    In the chat, or install the CLI and run notholy login in your terminal.

    $ notholy login