hardware-ctf
Lab/CTF: hardware/embedded/RF challenges; Saleae/sigrok traces, UART/I2C/SPI/CAN/JTAG/SWD/USB/BLE/RF, firmware, side-channel data.
v2026.11.13-21cd5683 התקנות+3 ב-7 ימים39 כוכביםMITסונכרן לפני 10 שעות
התקנה
עדיין אין לכם את ה-CLI של NotHoly? התקינו אותו קודם.
$ curl -fsSL https://notholy.com/install.sh | sh$ notholy skills install aeondave/hardware-ctfנכתב אל ~/.notholy/skills אחרי בדיקת החתימה וה-SHA-256.
חתימהחתום, ed25519
חבילה0a99bc37…d4f96325
0a99bc376e88…3d1cd4f963254 קבצים · 10.2 KBסריקהבינונישני ממצאים
- injection.no_confirmationreferences/debug-ports-and-firmware-extraction.md:81
- קישורים לדומיינים חיצוניים
מקורgithub.com/AeonDave/malskill/tree/main/offensive-ctf/hardware-ctf@21cd568
הפריט הזה עדיין לא נכתב בעברית, ולכן הוא מוצג בשפה אחרת: English.
בעמוד הזה
Solve hardware and embedded lab tasks by identifying the capture or device interface first, then decoding with timing, voltage, framing, and architecture assumptions made explicit.
When this skill applies
- Logic analyzer captures, Saleae
.salfiles, sigrok sessions, CSV edge traces, oscilloscope traces, audio captures of serial data, or display-signal samples. - UART, I2C, SPI, CAN, CANopen, JTAG, SWD, USB HID, USB MIDI, Bluetooth RFCOMM/BLE, RF/SDR, RFID/NFC, or peripheral PCAPs.
- Firmware images, SPI flash dumps, UEFI/BIOS blobs, bootloaders, microcontroller binaries, extracted filesystems, board photos, pinouts, schematics, CAD, G-code, or 3D-printing artifacts.
- Side-channel data such as power traces, timing traces, acoustic keyboard samples, LED Morse, or EM/RF measurements.
Operating model
- Preserve evidence and identify artifact class: capture, firmware, board/interface, RF sample, side-channel dataset, or CAD/G-code.
- Lock physical assumptions: sample rate, voltage domain, channel order, idle level, clock, endian, bit order, modulation, architecture, and toolchain.
- Decode the transport before interpreting payloads: bus framing, packet boundaries, checksums, compression, filesystem, or symbol timing.
- Choose the narrowest tool path: protocol decoder, firmware extractor, disassembler, emulator, SDR flowgraph, side-channel statistic, or visualization.
- Validate by reconstructing an observable: secret bytes, image, waveform, register trace, firmware string, UART console output, HID path, RF message, or 3D geometry.
- Record every assumption that affects decoding so the proof can be replayed or corrected.
Technique integration
Load these as needed:
forensic-techniquefor evidence handling, carving, metadata, timelines, and PCAP/peripheral reconstruction.reversing-techniquefor firmware, bootloaders, microcontroller binaries, and custom parsers.wireless-techniquefor RF/SDR, Bluetooth, Wi-Fi-derived, or radio telemetry tasks.network-techniquefor USB/Bluetooth/CAN PCAPs and protocol captures.web-ctfwhen a hardware challenge exposes an HTTP or browser-based transceiver, status panel, or session-backed control plane around the decoded protocol.arduinowhen a task requires real microcontroller wiring, sketches, Arduino CLI, PlatformIO, or board bring-up.python-patternsandsystematic-debuggingfor decoders, parsers, visualization, and reproducible notebooks/scripts.
Tool routing
- Logic/bus:
saleae-logic-2, sigrok/PulseView, sigrok-cli, logic2 automation, Python edge decoders, and protocol decoders. - Firmware:
binwalk,strings, dd, unsquashfs, UEFITool, chipsec, flashrom,ghidra,radare2,binaryninja, QEMU, and OpenOCD. - RF/SDR: GNU Radio, Universal Radio Hacker, rtl_433, inspectrum, spectrum tooling, numpy/scipy, and custom demodulators.
- Peripheral captures:
wireshark,tcpdump, usbmon,bluez, HID report parsers, MIDI decoders, and image/path reconstruction scripts. - Side-channel: numpy, scipy, pandas, matplotlib, correlation/DPA scripts, FFT/spectrogram tooling, and clustering/classification only after the signal is understood.
- CAD/G-code: slicer-aware parsers, zlib/heatshrink/QOI decoders, mesh viewers, coordinate projection, and metadata extraction.
Safety and scope gates
- Do not recommend wiring, flashing, or probing real hardware until voltage, ground, pin role, and target ownership are explicit.
- Prefer offline decoding over physical interaction when artifacts are sufficient.
- Avoid write operations through JTAG/SWD/SPI/flashrom unless an isolated lab target and recovery path are clear.
- Treat unknown pins as unsafe; identify power, ground, reset, boot, UART, and debug pins before connecting tools.
- For RF, follow local legal and lab constraints; passive analysis and replay in shielded or simulated environments are safer defaults.
Quick pivots
- Logic capture: infer sample rate, channels, idle levels, clock, start/stop bits, and bus decoder settings.
- UART: test baud, parity, stop bits, inversion, and line endings before parsing text.
- I2C/SPI: identify clock/data/chip-select, address or opcode patterns, and multi-byte endian.
- CAN: group arbitration IDs, infer periodic frames, counters, checksums, and signal scaling.
- JTAG/SWD: identify pins non-destructively, confirm chain/device ID, then dump or halt only in lab scope.
- Firmware: extract filesystem, identify architecture, search strings/configs, then reverse validation paths.
- RF/SDR: identify sample format, center frequency, symbol rate, modulation, framing, whitening, and checksum.
- Hybrid RF + web control plane: decode the burst offline first, then use UI state, session fields, or mission text as a control-plane oracle; re-decode each fresh capture instead of assuming a prior instance's exact bytes still apply.
- Side-channel: align traces, average noise, find leakage point, then validate recovered key/material independently.
Resources
- references/hardware-artifact-workflow.md — Load for capture, bus, firmware, RF, side-channel, fault-injection evidence or CAD/G-code triage.
- references/debug-ports-and-firmware-extraction.md — load for UART/JTAG/SWD/SPI/eMMC pivots, bootloader access, flash dumping, and recovery-first extraction.
- references/rf-and-sdr-decoding.md — load for IQ captures, SDR demodulation, BLE hopping analysis, and physical-layer validation before payload interpretation.
הקבצים בגרסה הזו
references/317.9 KB
- debug-ports-and-firmware-extraction.md6.3 KB
- hardware-artifact-workflow.md8.5 KB
- rf-and-sdr-decoding.md3.2 KB
- SKILL.md5.9 KB
הרשאות
| הרשאה | הוצהר | נמצא בסריקה |
|---|---|---|
| קורא קבצים | לא | לא |
| כותב קבצים | כן | כן |
| מריץ פקודות shell | לא | לא |
| משתמש ברשת | כן | כן |
| משתמש במחברים | לא | לא |
| שולט בדפדפן | לא | לא |
ממצאי הסריקה
נבדק ב-13 בנוב׳ 2026
- בינוניתPrompt injection · injection.no_confirmationreferences/debug-ports-and-firmware-extraction.md:81
- מידעקישור · קישורים לדומיינים חיצוניים
סריקה נקייה מורידה את הסיכון, אבל לא מוכיחה שהחבילה בטוחה. כדאי לקרוא מה מתקינים.
| גרסה | פורסמה | Commit | SHA-256 | חתימה | שינוי בהרשאות |
|---|---|---|---|---|---|
| v2026.11.13-21cd568 | 13 בנוב׳ 2026 | 21cd568 | 0a99bc37 | חתומה | – |
עוד מ-AeonDave
הכול מהמפרסם הזהעוד בקטגוריה מובייל, קושחה וחומרה
לקטגוריהשאלו כל מה שהסקופ מאפשר.
יוצרים חשבון, מוסיפים קרדיטים ושואלים את השאלה הראשונה בצ׳אט או בטרמינל.
- 1/3
יצירת חשבון
פרטי או חברה. אפשר לעבור לחשבון חברה אחר כך בלי לאבד יתרה או מפתחות.
פרטיחברה - 2/3
הוספת קרדיטים
בכרטיס אשראי. תשלום לפי טוקן, בלי מנוי.
$5.00טעינה מינימלית - 3/3
שאלה ראשונה
בצ׳אט, או להתקין את ה-CLI ולהריץ notholy login בטרמינל.
$ notholy login