Skip to content
New

DeepSeek V4.1 Flash free for 7 days: 10M tokens a day after a top-up of $10 or more. Until Nov 30.

How it works
aeondave/can-bus-modulesMobile, firmware and hardware

can-bus-modules

⁨CAN Bus interfacing for automotive/industrial networks using MCP2515 over SPI, baud rates, reading OBD-II frames.⁩

v2026.11.13-21cd5683 installs+3 in 7 days39 Starssynced 10 hours ago

Install

No NotHoly CLI yet? Install it first.

$ curl -fsSL https://notholy.com/install.sh | sh
$ notholy skills install aeondave/can-bus-modules

Writes to ⁦~/.notholy/skills⁩ after checking the signature and the SHA-256.

SignatureSigned, ed25519
b6Rbre1WT/…0QI1N6CQ==The CLI checks the SHA-256 and the signature before it writes a file.
Package3cd32375…c5ad6f2f
3cd32375f1af…7647c5ad6f2f1 file · ⁦1.3 KB⁩
ScanMedium1 finding
  • No license found
See the full scan
Sourcegithub.com/AeonDave/malskill/tree/main/hardware/can-bus-modules@21cd568

Goal: Interface microcontrollers with automotive and industrial Controller Area Networks (CAN) using transceivers to read and spoof packets.

1. Hardware Stack

  • MCU: e.g., Arduino or ESP32.
  • Controller: MCP2515 (Translates SPI from MCU into CAN format). Maintains transmit buffers and acceptance filters.
  • Transceiver: TJA1050 or MCP2551 (Translates logic-level CAN from the MCP2515 into the differential CAN_H and CAN_L analog voltages required by the physical bus).
  • Physical Bus: CAN_H and CAN_L twisted pair. Requires 120-ohm termination resistors at both ends of the bus.

2. Setting Baud Rates & Oscillators

The CAN bus relies entirely on timing. Connecting with the wrong speed brings down the bus (Error Passive).

  • Standard OBD-II in vehicles uses 500 kbps.
  • Slower comfort buses (doors, windows) might use 125 kbps or 250 kbps.
  • Make sure you initialize the library with the exact crystal oscillator speed attached to your MCP2515 board (commonly 8 MHz or 16 MHz).

3. Standard vs Extended Frames

  • Standard Frame: 11-bit ID. (e.g., 0x7DF). Used heavily in standard automotive.
  • Extended Frame: 29-bit ID. (e.g., 0x18DAF100). Often seen in heavy duty (J1939) or specialized sensors.
  • Payload is always 0 to 8 bytes.

4. Code Snapshot (mcp_can library)

cpp
#include <SPI.h>
#include <mcp_can.h>

const int spiCSPin = 10;
MCP_CAN CAN(spiCSPin);

void setup() {
    Serial.begin(115200);
    // Initialize exactly for 500k baud and 8MHz crystal
    while (CAN_OK != CAN.begin(CAN_500KBPS, MCP_8MHz)) {
        Serial.println("CAN init fail, retry...");
        delay(100);
    }
    Serial.println("CAN init ok!");
}

void loop() {
    long unsigned int rxId;
    unsigned char len = 0;
    unsigned char rxBuf[8];

    if (CAN_MSGAVAIL == CAN.checkReceive()) {
        CAN.readMsgBuf(&rxId, &len, rxBuf);
        Serial.print("ID: "); Serial.print(rxId, HEX);
        Serial.print(" Data: ");
        for(int i = 0; i<len; i++) {
            Serial.print(rxBuf[i], HEX); Serial.print(" ");
        }
        Serial.println();
    }
}

Files in this version

Permissions

PermissionDeclaredFound by the scan
Reads filesNoNo
Writes filesNoNo
Runs shell commandsNoNo
Uses the networkNoNo
Uses connectorsNoNo
Drives a browserNoNo

Scan findings

Reviewed on Nov 13, 2026

  1. MediumLicense · No license found

A clean scan lowers the risk but does not prove a package is safe. Read what you install.

VersionPublishedCommitSHA-256SignaturePermission change
v2026.11.13-21cd568Nov 13, 202621cd5683cd32375Signed–

Ask anything your scope allows.

Create an account, add credits and ask the first question in the chat or the terminal.

  1. 1/3

    Create the account

    Individual or company. You can switch to a company later without losing balance or keys.

    IndividualCompany
  2. 2/3

    Add credits

    By card. Pay per token, no subscription.

    $5.00minimum deposit
  3. 3/3

    Ask

    In the chat, or install the CLI and run notholy login in your terminal.

    $ notholy login