acquiring-disk-image-with-dd-and-dcfldd
Create forensically sound bit-for-bit disk images with dd or dcfldd on a Linux forensic workstation, preserving evidence integrity through hash verification (MD5/SHA) during acquisition. Use when imaging a suspect drive, USB device, or memory card for investigation, preserving volatile disk evidence
v1.03 installs+3 in 7 days36.3K StarsApache-2.0synced 13 hours ago
Install
No NotHoly CLI yet? Install it first.
$ curl -fsSL https://notholy.com/install.sh | sh$ notholy skills install mukul975/acquiring-disk-image-with-dd-and-dcflddWrites to ~/.notholy/skills after checking the signature and the SHA-256.
SignatureSigned, ed25519
Packagefb46defd…eae52f70
fb46defd4524…6f5deae52f704 files · 10.1 KBScanMedium2 findings
- Executable script shipped with the skillscripts/agent.py
- Links to outside domains
Sourcegithub.com/mukul975/Anthropic-Cybersecurity-Skills/tree/main/skills/acquiring-disk-image-with-dd-and-dcfldd@54a7988
On this page
When to Use
- When you need to create a forensic copy of a suspect drive for investigation
- During incident response when preserving volatile disk evidence before analysis
- When law enforcement or legal proceedings require a verified bit-for-bit copy
- Before performing any destructive analysis on a storage device
- When acquiring images from physical drives, USB devices, or memory cards
Prerequisites
- Linux-based forensic workstation (SIFT, Kali, or any Linux distro)
dd(pre-installed on all Linux systems) ordcfldd(enhanced forensic version)- Write-blocker hardware or software write-blocking configured
- Destination drive with sufficient storage (larger than source)
- Root/sudo privileges on the forensic workstation
- SHA-256 or MD5 hashing utilities (
sha256sum,md5sum)
Workflow
Step 1: Identify the Target Device and Enable Write Protection
# List all connected block devices to identify the target
lsblk -o NAME,SIZE,TYPE,MOUNTPOINT,MODEL
# Verify the device details
fdisk -l /dev/sdb
# Enable software write-blocking (if no hardware blocker)
blockdev --setro /dev/sdb
# Verify read-only status
blockdev --getro /dev/sdb
# Output: 1 (means read-only is enabled)
# Alternatively, use udev rules for persistent write-blocking
echo 'SUBSYSTEM=="block", ATTRS{serial}=="WD-WCAV5H861234", ATTR{ro}="1"' > /etc/udev/rules.d/99-writeblock.rules
udevadm control --reload-rulesStep 2: Prepare the Destination and Document the Source
# Create case directory structure
mkdir -p /cases/case-2024-001/{images,hashes,logs,notes}
# Document source drive information
hdparm -I /dev/sdb > /cases/case-2024-001/notes/source_drive_info.txt
# Record the serial number and model
smartctl -i /dev/sdb >> /cases/case-2024-001/notes/source_drive_info.txt
# Pre-hash the source device
sha256sum /dev/sdb | tee /cases/case-2024-001/hashes/source_hash_before.txtStep 3: Acquire the Image Using dd
# Basic dd acquisition with progress and error handling
dd if=/dev/sdb of=/cases/case-2024-001/images/evidence.dd \
bs=4096 \
conv=noerror,sync \
status=progress 2>&1 | tee /cases/case-2024-001/logs/dd_acquisition.log
# For compressed images to save space
dd if=/dev/sdb bs=4096 conv=noerror,sync status=progress | \
gzip -c > /cases/case-2024-001/images/evidence.dd.gz
# Using dd with a specific count for partial acquisition
dd if=/dev/sdb of=/cases/case-2024-001/images/first_1gb.dd \
bs=1M count=1024 status=progressStep 4: Acquire Using dcfldd (Preferred Forensic Method)
# Install dcfldd if not present
apt-get install dcfldd
# Acquire image with built-in hashing and split output
dcfldd if=/dev/sdb \
of=/cases/case-2024-001/images/evidence.dd \
hash=sha256,md5 \
hashwindow=1G \
hashlog=/cases/case-2024-001/hashes/acquisition_hashes.txt \
bs=4096 \
conv=noerror,sync \
errlog=/cases/case-2024-001/logs/dcfldd_errors.log
# Split large images into manageable segments
dcfldd if=/dev/sdb \
of=/cases/case-2024-001/images/evidence.dd \
hash=sha256 \
hashlog=/cases/case-2024-001/hashes/split_hashes.txt \
bs=4096 \
split=2G \
splitformat=aa
# Acquire with verification pass
dcfldd if=/dev/sdb \
of=/cases/case-2024-001/images/evidence.dd \
hash=sha256 \
hashlog=/cases/case-2024-001/hashes/verification.txt \
vf=/cases/case-2024-001/images/evidence.dd \
verifylog=/cases/case-2024-001/logs/verify.logStep 5: Verify Image Integrity
# Hash the acquired image
sha256sum /cases/case-2024-001/images/evidence.dd | \
tee /cases/case-2024-001/hashes/image_hash.txt
# Compare source and image hashes
diff <(sha256sum /dev/sdb | awk '{print $1}') \
<(sha256sum /cases/case-2024-001/images/evidence.dd | awk '{print $1}')
# If using split images, verify each segment
sha256sum /cases/case-2024-001/images/evidence.dd.* | \
tee /cases/case-2024-001/hashes/split_image_hashes.txt
# Re-hash source to confirm no changes occurred
sha256sum /dev/sdb | tee /cases/case-2024-001/hashes/source_hash_after.txt
diff /cases/case-2024-001/hashes/source_hash_before.txt \
/cases/case-2024-001/hashes/source_hash_after.txtStep 6: Document the Acquisition Process
# Generate acquisition report
cat << 'EOF' > /cases/case-2024-001/notes/acquisition_report.txt
DISK IMAGE ACQUISITION REPORT
==============================
Case Number: 2024-001
Date/Time: $(date -u +"%Y-%m-%d %H:%M:%S UTC")
Examiner: [Name]
Source Device: /dev/sdb
Model: [from hdparm output]
Serial: [from hdparm output]
Size: [from fdisk output]
Acquisition Tool: dcfldd v1.9.1
Block Size: 4096
Write Blocker: [Hardware/Software model]
Image File: evidence.dd
Image Hash (SHA-256): [from hash file]
Source Hash (SHA-256): [from hash file]
Hash Match: YES/NO
Errors During Acquisition: [from error log]
EOF
# Compress logs for archival
tar -czf /cases/case-2024-001/acquisition_package.tar.gz \
/cases/case-2024-001/hashes/ \
/cases/case-2024-001/logs/ \
/cases/case-2024-001/notes/Key Concepts
| Concept | Description |
|---|---|
| Bit-for-bit copy | Exact replica of source including unallocated space and slack space |
| Write blocker | Hardware or software mechanism preventing writes to evidence media |
| Hash verification | Cryptographic hash comparing source and image to prove integrity |
| Block size (bs) | Transfer chunk size affecting speed; 4096 or 64K typical for forensics |
| conv=noerror,sync | Continue on read errors and pad with zeros to maintain offset alignment |
| Chain of custody | Documented trail proving evidence has not been tampered with |
| Split imaging | Breaking large images into smaller files for storage and transport |
| Raw/dd format | Bit-for-bit image format without metadata container overhead |
Tools & Systems
| Tool | Purpose |
|---|---|
| dd | Standard Unix disk duplication utility for raw imaging |
| dcfldd | DoD Computer Forensics Laboratory enhanced version of dd with hashing |
| dc3dd | Another forensic dd variant from the DoD Cyber Crime Center |
| sha256sum | SHA-256 hash calculation for integrity verification |
| blockdev | Linux command to set block device read-only mode |
| hdparm | Drive identification and parameter reporting |
| smartctl | S.M.A.R.T. data retrieval for drive health and identification |
| lsblk | Block device enumeration and identification |
Common Scenarios
Scenario 1: Acquiring a Suspect Laptop Hard Drive
Connect the drive via a Tableau T35u hardware write-blocker, identify as /dev/sdb, use dcfldd with SHA-256 hashing, split into 4GB segments for DVD archival, verify hashes match, document in case notes.
Scenario 2: Imaging a USB Flash Drive from a Compromised Workstation
Use software write-blocking with blockdev --setro, acquire with dcfldd including MD5 and SHA-256 dual hashing, image is small enough for single file, verify and store on encrypted case drive.
Scenario 3: Remote Acquisition Over Network
Use dd piped through netcat or ssh for remote acquisition: ssh root@remote "dd if=/dev/sda bs=4096" | dd of=remote_image.dd bs=4096, hash both ends independently to verify transfer integrity.
Scenario 4: Acquiring from a Failing Drive
Use ddrescue first to recover readable sectors, then use dd with conv=noerror,sync to fill gaps with zeros, document which sectors were unreadable in the error log.
Output Format
Acquisition Summary:
Source: /dev/sdb (500GB Western Digital WD5000AAKX)
Destination: /cases/case-2024-001/images/evidence.dd
Tool: dcfldd 1.9.1
Block Size: 4096 bytes
Duration: 2h 15m 32s
Bytes Copied: 500,107,862,016
Errors: 0 bad sectors
Source SHA-256: a3f2b8c9d4e5f6a7b8c9d0e1f2a3b4c5d6e7f8a9b0c1d2e3f4a5b6c7d8e9f0a1
Image SHA-256: a3f2b8c9d4e5f6a7b8c9d0e1f2a3b4c5d6e7f8a9b0c1d2e3f4a5b6c7d8e9f0a1
Verification: PASSED - Hashes matchFiles in this version
references/12.5 KB
- api-reference.md2.5 KB
scripts/16.7 KB
- agent.py6.7 KB
- LICENSE11.0 KB
- SKILL.md8.6 KB
Permissions
| Permission | Declared | Found by the scan |
|---|---|---|
| Reads files | Yes | Yes |
| Writes files | Yes | Yes |
| Runs shell commands | Yes | Yes |
| Uses the network | Yes | Yes |
| Uses connectors | No | No |
| Drives a browser | No | No |
Scan findings
Reviewed on Nov 13, 2026
- MediumFile · Executable script shipped with the skillscripts/agent.py
- InfoLink · Links to outside domains
A clean scan lowers the risk but does not prove a package is safe. Read what you install.
| Version | Published | Commit | SHA-256 | Signature | Permission change |
|---|---|---|---|---|---|
| v1.0 | Nov 13, 2026 | 54a7988 | fb46defd | Signed | – |
More from mukul975
All from this publisher- testing-for-xml-injection-vulnerabilitiesmukul975/testing-for-xml-injection-vulnerabilities5
- testing-for-sensitive-data-exposuremukul975/testing-for-sensitive-data-exposure5
- performing-jwt-none-algorithm-attackmukul975/performing-jwt-none-algorithm-attack5
- detecting-aws-credential-exposure-with-trufflehogmukul975/detecting-aws-credential-exposure-with-trufflehog5
More in DFIR and threat hunting
See the category- hunting-for-command-and-control-beaconingmukul975/hunting-for-command-and-control-beaconing5
- audit-context-buildingtrailofbits/audit-context-building4
- incident-response-forensicssecurityskills/incident-response-forensics3
- extracting-credentials-from-memory-dumpmukul975/extracting-credentials-from-memory-dump3
- analyzing-browser-forensics-with-hindsightmukul975/analyzing-browser-forensics-with-hindsight3
- forensics-ctfaeondave/forensics-ctf3
Ask anything your scope allows.
Create an account, add credits and ask the first question in the chat or the terminal.
- 1/3
Create the account
Individual or company. You can switch to a company later without losing balance or keys.
IndividualCompany - 2/3
Add credits
By card. Pay per token, no subscription.
$5.00minimum deposit - 3/3
Ask
In the chat, or install the CLI and run notholy login in your terminal.
$ notholy login