tcpdump
Auth/lab ref: CLI packet capture and BPF filter tool.
v2026.11.13-21cd5683 installs+3 in 7 days39 StarsBSD-3-Clausesynced 10 hours ago
Install
No NotHoly CLI yet? Install it first.
$ curl -fsSL https://notholy.com/install.sh | sh$ notholy skills install aeondave/tcpdumpWrites to ~/.notholy/skills after checking the signature and the SHA-256.
SignatureSigned, ed25519
Packaged1ecd30f…7208302b
d1ecd30fa887…e3df7208302b2 files · 5.3 KBScanLowno findings
Sourcegithub.com/AeonDave/malskill/tree/main/offensive-tools/forensic/tcpdump@21cd568
On this page
CLI packet capture + BPF filter. Capture traffic, filter PCAPs, extract payloads, triage network activity.
Installation
# Linux
sudo apt install tcpdump
# macOS (preinstalled or)
brew install tcpdump
# Windows: use WinDump + Npcap (or use tshark instead)Core Flags Reference
| Flag | Purpose |
|---|---|
-i <iface> |
Interface to capture on |
-r <file> |
Read from PCAP file (instead of live capture) |
-w <file> |
Write captured packets to PCAP file |
-n |
No DNS resolution (IP addresses only) |
-nn |
No DNS + no port name resolution (shows port numbers) |
-v |
Verbose output |
-vv |
More verbose (full TCP flags, options) |
-vvv |
Maximum verbosity |
-s <n> |
Snap length (0 = unlimited, capture full packets) |
-c <n> |
Capture exactly n packets then stop |
-A |
Print packet payload as ASCII |
-X |
Print packet payload as hex + ASCII |
-XX |
Print packet header + payload as hex + ASCII |
-q |
Quiet — minimal output |
-e |
Print link-layer header (MAC addresses) |
-tttt |
Human-readable timestamps |
-D |
List available interfaces |
-G <n> |
Rotate capture file every n seconds |
-C <n> |
Rotate capture file every n MB |
-Z <user> |
Drop privileges after capture starts |
host |
BPF primitive — filter by IP |
port |
BPF primitive — filter by port |
net |
BPF primitive — filter by network |
Capture Patterns
Basic capture to file
# List interfaces
tcpdump -D
# Capture all traffic on interface
sudo tcpdump -i eth0 -nn -s 0 -w capture.pcap
# Capture limited packets
sudo tcpdump -i eth0 -nn -s 0 -c 1000 -w capture.pcap
# Capture with timestamps + verbose
sudo tcpdump -i eth0 -nn -s 0 -tttt -w capture.pcapTargeted captures
# Specific host
sudo tcpdump -i eth0 -nn -s 0 -w host.pcap 'host 10.10.10.5'
# Specific port
sudo tcpdump -i eth0 -nn -s 0 -w http.pcap 'port 80'
# Port range
sudo tcpdump -i eth0 -nn -s 0 'portrange 8000-9000'
# Specific protocol
sudo tcpdump -i eth0 -nn -s 0 -w dns.pcap 'udp port 53'
sudo tcpdump -i eth0 -nn -s 0 -w icmp.pcap 'icmp'
# HTTP + HTTPS
sudo tcpdump -i eth0 -nn -s 0 -w web.pcap 'port 80 or port 443'
# Exclude noise (focus on external traffic)
sudo tcpdump -i eth0 -nn -s 0 -w external.pcap 'not net 192.168.0.0/16 and not net 10.0.0.0/8'
# SYN packets only (new connections)
sudo tcpdump -i eth0 -nn 'tcp[tcpflags] & tcp-syn != 0 and tcp[tcpflags] & tcp-ack == 0'
# RST packets (connection resets, scan indicators)
sudo tcpdump -i eth0 -nn 'tcp[tcpflags] & tcp-rst != 0'Reading and Filtering Existing PCAPs
# Read and display
tcpdump -nn -r capture.pcap
# Verbose display
tcpdump -nn -vv -r capture.pcap
# Filter while reading
tcpdump -nn -r capture.pcap 'port 80'
tcpdump -nn -r capture.pcap 'host 10.10.10.5'
tcpdump -nn -r capture.pcap 'src host 10.10.10.5 and dst port 443'
# Write filtered subset to new PCAP
tcpdump -nn -r capture.pcap -w filtered.pcap 'port 80'
# Show only SYN packets (connection initiations)
tcpdump -nn -r capture.pcap 'tcp[tcpflags] == tcp-syn'
# Extract specific time window
tcpdump -nn -r capture.pcap -w window.pcap 'greater 14:30:00 and less 15:00:00'Payload Extraction
# Print ASCII payload (HTTP, cleartext passwords, etc.)
tcpdump -nn -A -r capture.pcap 'port 80'
# Print hex + ASCII
tcpdump -nn -X -r capture.pcap 'port 21' # FTP — may expose credentials
# Extract only payload bytes (for file recovery)
tcpdump -nn -A -r capture.pcap 'port 80' | grep -v "^[0-9a-f][0-9a-f]:[0-9a-f]" | grep -v "^$"
# Find strings in PCAP payload
tcpdump -nn -A -r capture.pcap 2>/dev/null | grep -i "password\|passwd\|pass=\|login\|credential"
# HTTP POST body extraction
tcpdump -nn -A -r capture.pcap 'tcp port 80 and (tcp[tcpflags] & tcp-push != 0)' | grep -A 20 "POST"
# Find flags or specific patterns in payloads
tcpdump -nn -A -r capture.pcap 2>/dev/null | grep -iE "flag\{|HTB\{|picoCTF"BPF Filter Syntax Reference
Primitives
host 192.168.1.1 # src or dst IP
src host 192.168.1.1 # source IP only
dst host 192.168.1.1 # destination IP only
net 192.168.1.0/24 # CIDR network
src net 10.0.0.0/8
port 80 # src or dst port
src port 1234
dst port 443
portrange 1024-65535
tcp # protocol
udp
icmp
arpOperators
and / && # both conditions
or / || # either condition
not / ! # negationComplex filters
# Traffic between two hosts
'host 192.168.1.1 and host 192.168.1.2'
# From source to specific port
'src host 10.10.10.5 and dst port 4444'
# Any of multiple ports
'port 80 or port 8080 or port 8443'
# Exclude specific host from capture
'not host 10.0.0.1'
# TCP SYN-ACK only (established connections)
'tcp[tcpflags] & (tcp-syn|tcp-ack) == (tcp-syn|tcp-ack)'
# Large packets (data transfer detection)
'greater 1400'
# VLAN traffic
'vlan'
# IPv6
'ip6'
# HTTP GET requests (match method in payload)
'tcp port 80 and tcp[((tcp[12:1] & 0xf0) >> 2):4] = 0x47455420' # "GET "Investigation Workflows
Workflow 1: Quick PCAP triage
# Overview — what hosts, ports, protocols?
tcpdump -nn -q -r capture.pcap | awk '{print $3, $5}' | sort | uniq -c | sort -rn | head 30
# Unique source IPs
tcpdump -nn -r capture.pcap | awk '{print $3}' | cut -d. -f1-4 | sort | uniq -c | sort -rn
# Unique destination ports
tcpdump -nn -r capture.pcap | grep -oP 'dst \d+\.\d+\.\d+\.\d+\.\K\d+' | sort | uniq -c | sort -rnWorkflow 2: Extract cleartext credentials
# FTP (port 21)
tcpdump -nn -A -r capture.pcap 'port 21' | grep -iE "USER|PASS"
# HTTP Basic Auth
tcpdump -nn -A -r capture.pcap 'port 80' | grep -i "Authorization: Basic"
# Telnet
tcpdump -nn -A -r capture.pcap 'port 23'
# SMTP credentials
tcpdump -nn -A -r capture.pcap 'port 25' | grep -iE "auth|user|pass"Workflow 3: Detect port scanning
# Many SYN packets from same source (SYN scan)
tcpdump -nn -r capture.pcap 'tcp[tcpflags] == tcp-syn' | awk '{print $3}' | \
cut -d. -f1-4 | sort | uniq -c | sort -rn | head
# RST flood (close scan, rejected ports)
tcpdump -nn -r capture.pcap 'tcp[tcpflags] & tcp-rst != 0' | wc -l
# UDP probe packets (UDP scan)
tcpdump -nn -r capture.pcap 'udp' | awk '{print $5}' | sort | uniq -c | sort -rnWorkflow 4: Find C2 beaconing
# Regular intervals from same source to same dest
tcpdump -nn -r capture.pcap 'host SUSPECT_IP' | awk '{print $1}' | \
awk 'NR>1{printf "%.1f\n", $1-prev} {prev=$1}' | sort | uniq -c | sort -rn | head
# Long-duration connection (persistent C2)
# → look for connections with many packets over long time windowWorkflow 5: Extract files from PCAP
# Better with Wireshark: File → Export Objects → HTTP
# CLI alternative with tcpflow:
sudo apt install tcpflow
tcpflow -r capture.pcap -o output_dir/
# Or with NetworkMiner (Windows GUI)
# Or reassemble TCP streams with tshark:
tshark -r capture.pcap -z follow,tcp,raw,0 2>/dev/null | xxd -r -p > stream0.binUseful Combinations
# Live capture → immediate grep (no file)
sudo tcpdump -i eth0 -nn -A 2>/dev/null | grep -i "password\|flag\|secret"
# Save and display simultaneously
sudo tcpdump -i eth0 -nn -s 0 -w capture.pcap | tcpdump -nn -r -
# Rotate files every 5 minutes (long capture)
sudo tcpdump -i eth0 -nn -s 0 -G 300 -w "capture_%Y%m%d_%H%M%S.pcap"
# Split large PCAP into smaller chunks
tcpdump -nn -r huge.pcap -w small.pcap -C 100 # 100MB chunks
# Count packets by protocol
tcpdump -nn -q -r capture.pcap | awk '{print $2}' | sort | uniq -c | sort -rn
# Convert PCAP to text for grep
tcpdump -nn -tttt -r capture.pcap > capture.txt
grep -i "interesting_string" capture.txtIntegration
| Tool | Use case |
|---|---|
wireshark / tshark |
Deep protocol dissection, file extraction, stream following |
zeek |
Convert PCAP to structured logs (dns.log, http.log, etc.) |
strings |
Quick string extraction from raw PCAP |
scapy (Python) |
Scripted PCAP parsing and packet manipulation |
tcpflow |
TCP stream reassembly and file extraction from PCAP |
binwalk |
Carve embedded files from reassembled streams |
yara |
Scan packet payloads for patterns |
Resources
| File | When to load |
|---|---|
references/ |
BPF filter recipes, tshark equivalents, complex protocol analysis patterns |
Files in this version
references/16.4 KB
- forensic-capture-flow.md6.4 KB
- SKILL.md8.6 KB
Permissions
| Permission | Declared | Found by the scan |
|---|---|---|
| Reads files | Yes | Yes |
| Writes files | Yes | Yes |
| Runs shell commands | Yes | Yes |
| Uses the network | No | No |
| Uses connectors | No | No |
| Drives a browser | No | No |
Scan findings
Reviewed on Nov 13, 2026
The scan found nothing to flag in this version.
A clean scan lowers the risk but does not prove a package is safe. Read what you install.
| Version | Published | Commit | SHA-256 | Signature | Permission change |
|---|---|---|---|---|---|
| v2026.11.13-21cd568 | Nov 13, 2026 | 21cd568 | d1ecd30f | Signed | – |
More from AeonDave
All from this publisherMore in DFIR and threat hunting
See the category- hunting-for-command-and-control-beaconingmukul975/hunting-for-command-and-control-beaconing5
- audit-context-buildingtrailofbits/audit-context-building4
- incident-response-forensicssecurityskills/incident-response-forensics3
- extracting-credentials-from-memory-dumpmukul975/extracting-credentials-from-memory-dump3
- analyzing-browser-forensics-with-hindsightmukul975/analyzing-browser-forensics-with-hindsight3
- forensics-ctfaeondave/forensics-ctf3
Ask anything your scope allows.
Create an account, add credits and ask the first question in the chat or the terminal.
- 1/3
Create the account
Individual or company. You can switch to a company later without losing balance or keys.
IndividualCompany - 2/3
Add credits
By card. Pay per token, no subscription.
$5.00minimum deposit - 3/3
Ask
In the chat, or install the CLI and run notholy login in your terminal.
$ notholy login