Skip to content
New

DeepSeek V4.1 Flash free for 7 days: 10M tokens a day after a top-up of $10 or more. Until Nov 30.

How it works
aeondave/rfid-nfc-modulesMobile, firmware and hardware

rfid-nfc-modules

⁨RFID/NFC reading and writing: Mifare Classic, PN532 vs RC522, APDUs, and microcontroller SPI/I2C connections.⁩

v2026.11.13-21cd5683 installs+3 in 7 days39 Starssynced 10 hours ago

Install

No NotHoly CLI yet? Install it first.

$ curl -fsSL https://notholy.com/install.sh | sh
$ notholy skills install aeondave/rfid-nfc-modules

Writes to ⁦~/.notholy/skills⁩ after checking the signature and the SHA-256.

SignatureSigned, ed25519
PUkXC2ABJS…6L24lrCQ==The CLI checks the SHA-256 and the signature before it writes a file.
Packagedea6a3d2…0614a41c
dea6a3d20ee0…40330614a41c1 file · ⁦1.2 KB⁩
ScanMedium1 finding
  • No license found
See the full scan
Sourcegithub.com/AeonDave/malskill/tree/main/hardware/rfid-nfc-modules@21cd568

Goal: Read and write 13.56MHz NFC tags (Mifare Classic, NTAG213) and 125kHz RFID fobs using microcontrollers.

1. Module Differences

  • RC522: Strictly 13.56 MHz. Connects via SPI. Restricted 3.3V logic. Good for reading basic UIDs and blocks, but cannot easily emulate cards or read mobile phones.
  • PN532: 13.56 MHz. Can read, write, and emulate cards. Communicates via easily toggled DIP switches for SPI, I2C, or UART (HHSU). Much more robust and widely supported by LibNFC.

2. Authentication & Sectors (MIFARE Classic 1K)

A standard Mifare Classic 1K tag has 16 sectors, each with 4 blocks.

  • Block 0 of Sector 0: Contains the immutable UID and manufacturer data.
  • Block 3 of each Sector: The "Trailer" block. Stores Key A, Key B, and the access conditions for that sector.
  • Rule: You must authenticate with the sector's Key A or Key B before you can read or write the data blocks in that sector. The default key shipped from factories is usually FF FF FF FF FF FF.

3. Programming (Arduino + MFRC522)

cpp
#include <SPI.h>
#include <MFRC522.h>

#define SS_PIN 10
#define RST_PIN 9
MFRC522 rfid(SS_PIN, RST_PIN);

void setup() {
  Serial.begin(9600);
  SPI.begin(); 
  rfid.PCD_Init(); 
}

void loop() {
  // Look for a new card
  if ( ! rfid.PICC_IsNewCardPresent()) return;
  // Verify it has been read
  if ( ! rfid.PICC_ReadCardSerial()) return;

  Serial.print("UID:");
  for (byte i = 0; i < rfid.uid.size; i++) {
    Serial.print(rfid.uid.uidByte[i], HEX);
    Serial.print(" ");
  }
  Serial.println();

  rfid.PICC_HaltA();
}

4. OPSEC

  • Modern access control systems reject MIFARE Classic due to trivial cloning and nested authentication offline cracking (via Proxmark3). Focus on reading UID for cheap locker systems, but expect DESFire EV1/2/3 for modern corporate badges.

Files in this version

Permissions

PermissionDeclaredFound by the scan
Reads filesNoNo
Writes filesNoNo
Runs shell commandsNoNo
Uses the networkNoNo
Uses connectorsNoNo
Drives a browserNoNo

Scan findings

Reviewed on Nov 13, 2026

  1. MediumLicense · No license found

A clean scan lowers the risk but does not prove a package is safe. Read what you install.

VersionPublishedCommitSHA-256SignaturePermission change
v2026.11.13-21cd568Nov 13, 202621cd568dea6a3d2Signed–

Ask anything your scope allows.

Create an account, add credits and ask the first question in the chat or the terminal.

  1. 1/3

    Create the account

    Individual or company. You can switch to a company later without losing balance or keys.

    IndividualCompany
  2. 2/3

    Add credits

    By card. Pay per token, no subscription.

    $5.00minimum deposit
  3. 3/3

    Ask

    In the chat, or install the CLI and run notholy login in your terminal.

    $ notholy login