raspberry-pi
Raspberry Pi hardware interfacing: GPIO, I2C, SPI, UART, and Python programming for SBC hardware.
v2026.11.13-21cd5683 installs+3 in 7 days39 Starssynced 10 hours ago
Install
No NotHoly CLI yet? Install it first.
$ curl -fsSL https://notholy.com/install.sh | sh$ notholy skills install aeondave/raspberry-piWrites to ~/.notholy/skills after checking the signature and the SHA-256.
SignatureSigned, ed25519
Packagecea21ff5…06f1b024
cea21ff5ceec…f29e06f1b0241 file · 1007 BScanMedium1 finding
- No license found
Sourcegithub.com/AeonDave/malskill/tree/main/hardware/raspberry-pi@21cd568
On this page
Goal: Interface hardware peripherals (sensors, actuators, radios) with a Raspberry Pi running a standard Linux OS (Raspberry Pi OS).
1. Pinout & Buses
The 40-pin GPIO header provides multiple buses.
- Levels: GPIO logic is 3.3V. Connecting 5V signals directly will destroy the Pi.
- I2C: Pins 3 (SDA) and 5 (SCL). Requires enabling via
raspi-config. Built-in pull-up resistors (1.8kΩ) exist on these pins. - SPI: Pins 19 (MOSI), 21 (MISO), 23 (SCLK), 24 (CE0), 26 (CE1).
- UART: Pins 8 (TX) and 10 (RX). Usually mapped to
/dev/serial0(disables Bluetooth console on Pi 3/4).
2. Software Interfacing (Python)
Prefer gpiozero for simple UI/sensors and smbus2 or spidev for deep bus control.
I2C Scanner
sudo apt install i2c-tools
i2cdetect -y 1Python I2C Example
from smbus2 import SMBus
with SMBus(1) as bus:
# Read a byte from device 0x48, register 0x00
b = bus.read_byte_data(0x48, 0)3. Production Rules
- Power: The 5V pins bypass the polyfuse. Modulating heavy loads (motors) requires an external relay/MOSFET and separate power supply.
- Real-Time Limits: Linux is not a Real-Time OS. Fast bit-banging (like NeoPixels or strict timing protocols) will jitter unless offloaded to the PWM/DMA controllers or a co-processor (like an Arduino/Pico).
Files in this version
- SKILL.md1.5 KB
Permissions
| Permission | Declared | Found by the scan |
|---|---|---|
| Reads files | No | No |
| Writes files | No | No |
| Runs shell commands | Yes | Yes |
| Uses the network | No | No |
| Uses connectors | No | No |
| Drives a browser | No | No |
Scan findings
Reviewed on Nov 13, 2026
- MediumLicense · No license found
A clean scan lowers the risk but does not prove a package is safe. Read what you install.
| Version | Published | Commit | SHA-256 | Signature | Permission change |
|---|---|---|---|---|---|
| v2026.11.13-21cd568 | Nov 13, 2026 | 21cd568 | cea21ff5 | Signed | – |
More from AeonDave
All from this publisherMore in Mobile, firmware and hardware
See the categoryAsk anything your scope allows.
Create an account, add credits and ask the first question in the chat or the terminal.
- 1/3
Create the account
Individual or company. You can switch to a company later without losing balance or keys.
IndividualCompany - 2/3
Add credits
By card. Pay per token, no subscription.
$5.00minimum deposit - 3/3
Ask
In the chat, or install the CLI and run notholy login in your terminal.
$ notholy login