Skip to content
New

DeepSeek V4.1 Flash free for 7 days: 10M tokens a day after a top-up of $10 or more. Until Nov 30.

How it works
aeondave/lora-modulesMobile, firmware and hardware

lora-modules

⁨LoRa and LoRaWAN SPI module interfacing (SX1276, SX1262), frequency band tuning, and radio libraries.⁩

v2026.11.13-21cd5683 installs+3 in 7 days39 Starssynced 10 hours ago

Install

No NotHoly CLI yet? Install it first.

$ curl -fsSL https://notholy.com/install.sh | sh
$ notholy skills install aeondave/lora-modules

Writes to ⁦~/.notholy/skills⁩ after checking the signature and the SHA-256.

SignatureSigned, ed25519
6kHz8trukG…NhS1OmAg==The CLI checks the SHA-256 and the signature before it writes a file.
Package939e41b4…eafd6366
939e41b4cb8d…5b68eafd63661 file · ⁦1.1 KB⁩
ScanMedium1 finding
  • No license found
See the full scan
Sourcegithub.com/AeonDave/malskill/tree/main/hardware/lora-modules@21cd568

Goal: Establish long-range, low-power radio communication using Semtech LoRa transceivers (SX1276/SX1278, RFM95, SX1262) via SPI.

1. Hardware Interface

LoRa chips communicate via SPI and use a few extra interrupt pins to notify the MCU when a packet is received.

  • SCK, MISO, MOSI -> Hardware SPI.
  • NSS (Chip Select).
  • RST (Reset pin).
  • DIO0, DIO1 (Data Input/Output interrupts).

Logic Level: Strictly 3.3V.

2. Point-to-Point vs LoRaWAN

  • LoRa (Physical Layer): Two nodes talking directly to each other using the RadioHead (RH_RF95) or LoRa library. No network joining, no encryption by default.
  • LoRaWAN (MAC Layer): Connecting an edge node to public networks like The Things Network (TTN) or Helium. Requires the LMIC (LoRaMAC-in-C) library. Uses AES-128 encryption and requires AppSKey/NwkSKey provisioning.

3. Simple Point-to-Point Example (Arduino)

cpp
#include <SPI.h>
#include <LoRa.h>

void setup() {
  Serial.begin(115200);
  // CS=10, reset=9, DIO0=2
  LoRa.setPins(10, 9, 2);

  // Initialize at 868 MHz (Europe) or 915 MHz (US)
  if (!LoRa.begin(868E6)) {
    Serial.println("Starting LoRa failed!");
    while (1);
  }
}

void loop() {
  LoRa.beginPacket();
  LoRa.print("Hello from Malskill");
  LoRa.endPacket();
  delay(10000);
}

4. Spreading Factor (SF)

You can tune the signal using LoRa.setSpreadingFactor(sf).

  • SF7: Faster transmission, shorter range, less power consumption.
  • SF12: Ultra-slow transmission, maximum range, punches through buildings.

Files in this version

Permissions

PermissionDeclaredFound by the scan
Reads filesNoNo
Writes filesNoNo
Runs shell commandsNoNo
Uses the networkNoNo
Uses connectorsNoNo
Drives a browserNoNo

Scan findings

Reviewed on Nov 13, 2026

  1. MediumLicense · No license found

A clean scan lowers the risk but does not prove a package is safe. Read what you install.

VersionPublishedCommitSHA-256SignaturePermission change
v2026.11.13-21cd568Nov 13, 202621cd568939e41b4Signed–

Ask anything your scope allows.

Create an account, add credits and ask the first question in the chat or the terminal.

  1. 1/3

    Create the account

    Individual or company. You can switch to a company later without losing balance or keys.

    IndividualCompany
  2. 2/3

    Add credits

    By card. Pay per token, no subscription.

    $5.00minimum deposit
  3. 3/3

    Ask

    In the chat, or install the CLI and run notholy login in your terminal.

    $ notholy login