gps-modules
GPS/GNSS module interfacing: UART baud rates, NMEA sentence parsing, and PPS timing synchronization.
v2026.11.13-21cd5683 installs+3 in 7 days39 Starssynced 10 hours ago
Install
No NotHoly CLI yet? Install it first.
$ curl -fsSL https://notholy.com/install.sh | sh$ notholy skills install aeondave/gps-modulesWrites to ~/.notholy/skills after checking the signature and the SHA-256.
SignatureSigned, ed25519
Packagebe0e0fc5…82e46f6a
be0e0fc53586…d4b682e46f6a1 file · 990 BScanMedium1 finding
- No license found
Sourcegithub.com/AeonDave/malskill/tree/main/hardware/gps-modules@21cd568
On this page
Goal: Interface GPS/GNSS receivers (NEO-6M, NEO-M8N, ATGM336H) with microcontrollers to parse location, speed, and precision timing.
1. Hardware Connection
- Interface: UART / Serial.
- Default Baud Rates: Usually 9600 bps (NEO-6M) or 38400 bps (NEO-M8N).
- Wiring:
TX (GPS) -> RX (MCU),RX (GPS) -> TX (MCU). - PPS Pin: Pulse Per Second. Rises exactly on the UTC second boundary. Essential for NTP stratum-1 servers.
2. NMEA Parsing (Arduino/C++)
GPS modules constantly stream ASCII NMEA sentences over UART.
$GPRMC: Minimum Recommended Specific GPS/Transit data (Time, Lat, Lon, Speed).$GPGSV: Satellites in view.
Library: Use TinyGPSPlus for easy C++ parsing.
#include <TinyGPS++.h>
#include <SoftwareSerial.h>
TinyGPSPlus gps;
SoftwareSerial gpsSerial(4, 3); // RX=4, TX=3
void setup() {
Serial.begin(115200);
gpsSerial.begin(9600);
}
void loop() {
while (gpsSerial.available() > 0) {
if (gps.encode(gpsSerial.read())) {
if (gps.location.isValid()) {
Serial.print("Lat: "); Serial.println(gps.location.lat(), 6);
Serial.print("Lng: "); Serial.println(gps.location.lng(), 6);
}
}
}
}3. Antenna & Cold Starts
- Cold Start: A GPS module without a battery backup can take 30s to 5 minutes to get a "fix" on satellites.
- Always test GPS devices outside or near a large window. Concrete buildings block the faint L1-band signals completely.
Files in this version
- SKILL.md1.6 KB
Permissions
| Permission | Declared | Found by the scan |
|---|---|---|
| Reads files | Yes | Yes |
| Writes files | No | No |
| Runs shell commands | No | No |
| Uses the network | No | No |
| Uses connectors | No | No |
| Drives a browser | No | No |
Scan findings
Reviewed on Nov 13, 2026
- MediumLicense · No license found
A clean scan lowers the risk but does not prove a package is safe. Read what you install.
| Version | Published | Commit | SHA-256 | Signature | Permission change |
|---|---|---|---|---|---|
| v2026.11.13-21cd568 | Nov 13, 2026 | 21cd568 | be0e0fc5 | Signed | – |
More from AeonDave
All from this publisherMore in Mobile, firmware and hardware
See the categoryAsk anything your scope allows.
Create an account, add credits and ask the first question in the chat or the terminal.
- 1/3
Create the account
Individual or company. You can switch to a company later without losing balance or keys.
IndividualCompany - 2/3
Add credits
By card. Pay per token, no subscription.
$5.00minimum deposit - 3/3
Ask
In the chat, or install the CLI and run notholy login in your terminal.
$ notholy login