Skip to content
New

DeepSeek V4.1 Flash free for 7 days: 10M tokens a day after a top-up of $10 or more. Until Nov 30.

How it works
aeondave/esp32Mobile, firmware and hardware

esp32

⁨ESP32 programming: Wi-Fi/BLE integration, GPIO muxing, FreeRTOS tasks, and power management.⁩

v2026.11.13-21cd5682 installs+2 in 7 days39 Starssynced 11 hours ago

Install

No NotHoly CLI yet? Install it first.

$ curl -fsSL https://notholy.com/install.sh | sh
$ notholy skills install aeondave/esp32

Writes to ⁦~/.notholy/skills⁩ after checking the signature and the SHA-256.

SignatureSigned, ed25519
Kn+7Fc1/HF…PQ63CaAQ==The CLI checks the SHA-256 and the signature before it writes a file.
Package6684d937…add0343e
6684d937c385…f9bfadd0343e1 file · ⁦1.0 KB⁩
ScanMedium1 finding
  • No license found
See the full scan
Sourcegithub.com/AeonDave/malskill/tree/main/hardware/esp32@21cd568

Goal: Develop embedded applications on ESP32 MCUs, utilizing its dual-core CPU, Wi-Fi/BLE radios, and advanced peripheral matrix.

1. Hardware Overview

  • Voltage: 3.3V Logic.
  • ADC: Dual 12-bit ADCs, but ADC2 cannot be used while Wi-Fi is active.
  • Strapping Pins: Pins 0, 2, 5, 12, 15 must be at specific logic levels during boot. Avoid using them for inputs if possible.
  • Muxing: Almost any GPIO can be assigned to hardware I2C, SPI, or UART using the ESP32 matrix.

2. Radio & Network (Arduino Core)

cpp
#include <WiFi.h>

void setup() {
  WiFi.mode(WIFI_STA);
  WiFi.begin("SSID", "PASSWORD");
  while (WiFi.status() != WL_CONNECTED) { delay(500); }
}

3. FreeRTOS Tasks

ESP32 runs FreeRTOS by default. Avoid blocking loop(); instead, spawn isolated tasks (especially to pin 0 vs pin 1).

cpp
void myTask(void * parameter) {
  for(;;) {
    // Task logic
    vTaskDelay(100 / portTICK_PERIOD_MS); 
  }
}

void setup() {
  xTaskCreatePinnedToCore(
    myTask,   /* Function to implement the task */
    "Task1",  /* Name of the task */
    10000,    /* Stack size in words */
    NULL,     /* Task input parameter */
    1,        /* Priority of the task */
    NULL,     /* Task handle */
    0);       /* Core where the task should run */
}

4. OPSEC & Deployments

  • Avoid writing raw credentials to flash without NVS encryption if physical extraction is a threat.
  • Deep Sleep reduces draw to ~10µA. Wake via RTC GPIO or Timer.

Files in this version

Permissions

PermissionDeclaredFound by the scan
Reads filesNoNo
Writes filesNoNo
Runs shell commandsNoNo
Uses the networkNoNo
Uses connectorsNoNo
Drives a browserNoNo

Scan findings

Reviewed on Nov 13, 2026

  1. MediumLicense · No license found

A clean scan lowers the risk but does not prove a package is safe. Read what you install.

VersionPublishedCommitSHA-256SignaturePermission change
v2026.11.13-21cd568Nov 13, 202621cd5686684d937Signed–

Ask anything your scope allows.

Create an account, add credits and ask the first question in the chat or the terminal.

  1. 1/3

    Create the account

    Individual or company. You can switch to a company later without losing balance or keys.

    IndividualCompany
  2. 2/3

    Add credits

    By card. Pay per token, no subscription.

    $5.00minimum deposit
  3. 3/3

    Ask

    In the chat, or install the CLI and run notholy login in your terminal.

    $ notholy login