tracealyzer
Trace execution (into or over calls) for N steps or until a condition, then analyze the recorded instruction log
v2026.3.13-0409f533 התקנות+3 ב-7 ימים210 כוכביםMITסונכרן לפני 11 שעות
התקנה
עדיין אין לכם את ה-CLI של NotHoly? התקינו אותו קודם.
$ curl -fsSL https://notholy.com/install.sh | sh$ notholy skills install dariushoule/tracealyzerנכתב אל ~/.notholy/skills אחרי בדיקת החתימה וה-SHA-256.
חתימהחתום, ed25519
חבילה01677937…a9661e0c
0167793710d9…79a3a9661e0cקובץ אחד · 1.8 KBסריקהנמוךאין ממצאים
מקורgithub.com/dariushoule/x64dbg-skills/tree/main/skills/tracealyzer@0409f53
הפריט הזה עדיין לא נכתב בעברית, ולכן הוא מוצג בשפה אחרת: English.
בעמוד הזה
Trace debuggee execution — stepping into or over calls — for a specified number of instructions or until a condition is met. The full instruction log is captured to a file and then analyzed.
Instructions
Follow these steps exactly:
1. Verify debugger connection
Call mcp__x64dbg__get_debugger_status to confirm the debugger is connected and a debuggee is loaded and paused. If it is running, call mcp__x64dbg__pause. If no debuggee is loaded, tell the user and stop.
2. Gather trace parameters
Ask the user for the following if not already provided:
- Trace mode: trace into calls or trace over calls (default: over)
- Stop condition — one of:
- A maximum number of instructions (e.g.
1000) - An x64dbg expression that stops when true (e.g.
cip == 0x7FF6A0001000,rax != 0) - Both (whichever triggers first)
- A maximum number of instructions (e.g.
If the user provides a symbol or address for the stop condition, resolve it with mcp__x64dbg__eval_expression and build the break_condition expression (e.g. cip == <resolved_addr>).
When the user only specifies a step count N and no explicit break condition, use break_condition 0 (never true — the trace runs until max_steps is hit).
3. Capture starting context
Call mcp__x64dbg__get_all_registers and mcp__x64dbg__disassemble at the current instruction pointer to record the starting state. Note the starting address.
4. Run the trace
Prepare the output log path: ./traces/trace_<timestamp>.log (create the traces directory if it doesn't exist via Bash).
Call the appropriate trace tool (mcp__x64dbg__trace_into or mcp__x64dbg__trace_over) with:
| Parameter | Value |
|---|---|
break_condition |
The user's condition, or 0 if only a step count was given |
max_steps |
The user's step count, or 50000 if only a condition was given |
log_text |
`{p:cip} {i:cip} |
log_file |
The output log path from above |
wait_timeout |
Scale with max_steps — use max(60, max_steps // 500) seconds |
5. Read and analyze the trace log
Read the trace log file. The log contains one line per executed instruction in the format:
<address> <disassembly> | Label=<label> Comment=<comment>Ignore when Labels or Comments say [Formatting Error], it just means there is no label or comment at that instruction.
Analyze the trace and present a summary to the user:
- Trace overview: total instructions executed, start address → end address, trace mode used
- Execution flow: describe the high-level behavior — what the code did, which functions were called, loops observed, and notable control-flow patterns
- Hot spots: addresses or regions that appear most frequently (loops, repeated calls)
- Key observations: interesting register manipulations, memory accesses, syscalls, API calls, string operations, or anything else that stands out
Use mcp__x64dbg__get_symbol to resolve notable addresses to symbol names where possible.
If the trace log is very large (>2000 lines), read it in chunks and summarize progressively.
6. Follow-up actions
After presenting the summary, ask the user if they would like any follow-up actions such as:
- Annotate: add comments/labels in x64dbg at key addresses using
mcp__x64dbg__set_comment/mcp__x64dbg__set_label - Deeper analysis: re-trace a specific sub-region, or focus on a particular function
- Deobfuscation: identify and explain obfuscated patterns found in the trace
- Export: the trace log is already saved to disk at the path from step 4
הקבצים בגרסה הזו
- SKILL.md4.0 KB
הרשאות
| הרשאה | הוצהר | נמצא בסריקה |
|---|---|---|
| קורא קבצים | כן | כן |
| כותב קבצים | לא | לא |
| מריץ פקודות shell | כן | כן |
| משתמש ברשת | לא | לא |
| משתמש במחברים | כן | כן |
| שולט בדפדפן | לא | לא |
ממצאי הסריקה
נבדק ב-13 בנוב׳ 2026
הסריקה לא מצאה בגרסה הזו שום דבר שצריך לסמן.
סריקה נקייה מורידה את הסיכון, אבל לא מוכיחה שהחבילה בטוחה. כדאי לקרוא מה מתקינים.
| גרסה | פורסמה | Commit | SHA-256 | חתימה | שינוי בהרשאות |
|---|---|---|---|---|---|
| v2026.3.13-0409f53 | 13 בנוב׳ 2026 | 0409f53 | 01677937 | חתומה | – |
עוד מ-dariushoule
הכול מהמפרסם הזהעוד בקטגוריה DFIR וציד איומים
לקטגוריה- hunting-for-command-and-control-beaconingmukul975/hunting-for-command-and-control-beaconing5
- audit-context-buildingtrailofbits/audit-context-building4
- incident-response-forensicssecurityskills/incident-response-forensics3
- extracting-credentials-from-memory-dumpmukul975/extracting-credentials-from-memory-dump3
- analyzing-browser-forensics-with-hindsightmukul975/analyzing-browser-forensics-with-hindsight3
- forensics-ctfaeondave/forensics-ctf3
שאלו כל מה שהסקופ מאפשר.
יוצרים חשבון, מוסיפים קרדיטים ושואלים את השאלה הראשונה בצ׳אט או בטרמינל.
- 1/3
יצירת חשבון
פרטי או חברה. אפשר לעבור לחשבון חברה אחר כך בלי לאבד יתרה או מפתחות.
פרטיחברה - 2/3
הוספת קרדיטים
בכרטיס אשראי. תשלום לפי טוקן, בלי מנוי.
$5.00טעינה מינימלית - 3/3
שאלה ראשונה
בצ׳אט, או להתקין את ה-CLI ולהריץ notholy login בטרמינל.
$ notholy login