דילוג לתוכן
New

DeepSeek V4.1 Flash free for 7 days: 10M tokens a day after a top-up of $10 or more. Until Nov 30.

How it works
aeondave/systematic-debuggingהנדסה לאחור ו-fuzzing

systematic-debugging

⁨Root-cause-first debugging workflow for software, exploit tooling, fuzzing harnesses, reverse-engineering helpers, C2/client code, flaky tests, crashes, races, and environment-specific failures. Use when a failure is not immediately obvious or when repeated quick fixes risk hiding the real defect.⁩

v2026.11.13-21cd5683 התקנות⁦+3⁩ ב-7 ימים39 כוכביםMITסונכרן לפני 11 שעות

התקנה

עדיין אין לכם את ה-CLI של NotHoly? התקינו אותו קודם.

$ curl -fsSL https://notholy.com/install.sh | sh
$ notholy skills install aeondave/systematic-debugging

נכתב אל ⁦~/.notholy/skills⁩ אחרי בדיקת החתימה וה-SHA-256.

חתימהחתום, ed25519
Ne8k0KV1Ok…LnnWuuCA==ה-CLI בודק את ה-SHA-256 ואת החתימה לפני שהוא כותב קובץ כלשהו.
חבילה7cdbcb9a…e2b50027
7cdbcb9a2008…9090e2b500274 קבצים · ⁦5.9 KB⁩
סריקהנמוךממצא אחד
  • קישורים לדומיינים חיצוניים
לסריקה המלאה
מקורgithub.com/AeonDave/malskill/tree/main/coding-behaviours/systematic-debugging@21cd568

הפריט הזה עדיין לא נכתב בעברית, ולכן הוא מוצג בשפה אחרת: English.

Diagnose software failures through observable state and controlled checks. Keep a suspected cause, an effective mitigation, and a verified fix distinct.

When to activate

  • Crash, timeout, flaky test, exploit instability, silent corruption, race, or environment-specific failure.
  • Repeated fixes have not explained or resolved the issue.
  • The observed failure is far from the likely source: heap corruption, async timing, protocol state, ABI mismatch, or bad fixture isolation.

Workflow

  1. Frame and preserve: record expected versus observed behavior, affected scope, command/input, build, configuration, seed, and exact failure evidence as applicable. In an active incident, prioritize authorized containment or recovery; preserve useful evidence without delaying urgent mitigation. Follow Google SRE's triage guidance.
  2. Reproduce or compare: seek the smallest case retaining the same failure signal. If reproduction is unavailable or intermittent, compare failing and successful traces and relevant environmental differences; continue diagnosis with bounded claims. Do not reset state or discard the only failing artifact to get a clean run.
  3. Localize: classify the failure and inspect the actual execution path. Trace data, control, ownership, and configuration from the symptom toward the first violated contract; identify the next unknown boundary rather than assuming the crashing line is the cause.
  4. Test a prediction: state what the suspected mechanism predicts and choose a check that distinguishes it from plausible alternatives. Instrument that boundary with a log, breakpoint, sanitizer, packet/syscall trace, or watchpoint. Before reading a probe or forced change as evidence, confirm it actually took effect — the log line executed, the rebuilt artifact is the one running, the mutation differs from a pristine copy; a stale build, wrong binary, cached artifact, or edited-but-unused file turns a no-op into a false negative. Iterate tracing and experiments as results arrive; use hypothesis-driven when competing explanations need a structured investigation.
  5. Correct the supported cause: make the smallest complete change that repairs the violated contract, including affected consumers. Keep a necessary workaround explicit when the underlying cause cannot yet be corrected. Preserve diagnostic evidence, then remove temporary probes or retain only useful, bounded diagnostics.
  6. Verify: add or update a regression test/reproducer where practical, check the original failure and relevant neighboring behavior, then run applicable broader checks. Use testing-reliability when the test itself is suspect and verification-before-completion for completion gates. For intermittent failures, report tested schedules, seeds, or workload and remaining uncertainty; a single successful run does not establish elimination.

When progress stalls

When patches or retries stop producing new evidence, stop speculative changes and reassess the observation, environment, and causal model. Use loop-control-and-pivots; a fixed attempt count does not diagnose the defect. Continue useful investigation within the authorized scope.

Offensive debugging focus

  • Exploit dev: verify offsets, mitigations, architecture, target build, and debugger side effects.
  • Fuzzing: preserve the original input, minimize while retaining the failure signature, and record seed/corpus and instrumentation. Check whether replay outside the fuzzer reproduces the same defect; record environment differences when it does not.
  • Shellcode/BOF/loader work: check ABI, stack alignment, calling convention, clobbered registers, and import resolution.
  • Network tooling: capture wire data before changing parser or retry logic.
  • Evasion research: distinguish bypass failure from environmental control, policy, or telemetry differences.

Resources

Load only the reference matching the unresolved step:

  • references/root-cause-tracing.md — load for downstream symptoms, regression isolation, or tracing state across boundaries.
  • references/condition-based-waiting.md — load for startup, async completion, or timing failures where a wait observes the wrong condition.
  • references/defense-in-depth.md — load after diagnosis when deciding whether a boundary guard or another prevention layer adds value.

Use software-guidelines for scoped repository edits and software-architecture when the correction changes boundaries or ownership. Report the failure, supported causal chain or remaining hypothesis, delivered change, checks, and limits; use evidence-before-claims when the strength of a causal claim is uncertain.

הקבצים בגרסה הזו

הרשאות

הרשאההוצהרנמצא בסריקה
קורא קבציםלאלא
כותב קבציםלאלא
מריץ פקודות shellלאלא
משתמש ברשתכןכן
משתמש במחבריםלאלא
שולט בדפדפןלאלא

ממצאי הסריקה

נבדק ב-13 בנוב׳ 2026

  1. מידעקישור · קישורים לדומיינים חיצוניים

סריקה נקייה מורידה את הסיכון, אבל לא מוכיחה שהחבילה בטוחה. כדאי לקרוא מה מתקינים.

גרסהפורסמהCommitSHA-256חתימהשינוי בהרשאות
v2026.11.13-21cd56813 בנוב׳ 202621cd5687cdbcb9aחתומה–

שאלו כל מה שהסקופ מאפשר.

יוצרים חשבון, מוסיפים קרדיטים ושואלים את השאלה הראשונה בצ׳אט או בטרמינל.

  1. 1/3

    יצירת חשבון

    פרטי או חברה. אפשר לעבור לחשבון חברה אחר כך בלי לאבד יתרה או מפתחות.

    פרטיחברה
  2. 2/3

    הוספת קרדיטים

    בכרטיס אשראי. תשלום לפי טוקן, בלי מנוי.

    $5.00טעינה מינימלית
  3. 3/3

    שאלה ראשונה

    בצ׳אט, או להתקין את ה-CLI ולהריץ notholy login בטרמינל.

    $ notholy login